BENDERS, Tube, Pipe & Bar
Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, BENDER CATEGORIES ARE IN ALPHABETICAL ORDER.

*BENDERS: Tube, Pipe & Bar with MANDREL EXTRACTOR*
 *BENDERS: Tube, Pipe & Bar without MANDREL EXTRACTOR*

If you require a Quote Sheet PLEASE  send  us your requirements:
CENTURY MACHINERY COMPANY INC.
1937 South Santa Fe Avenue
Los Angeles, California 90021
Email: sales@centurymachinery.com

Website: www.centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499

BENDERS: Tube, Pipe & Bar
 WITH MANDREL EXTRACTOR  B1804-

1" VEENSTRA  ROTARY HORIZONTAL TUBE, PIPE and BAR BENDER
Mfg. in Amsterdam, Holland
 Clockwise Bend thru 195º arc
Hydraulic Pump Drive 5 hp
 Equipped with Operators Control Station
     (1) 1" Die x 3¾" Radius    Inventory Reference B1835-9254  CLICK HERE FOR QUOTATION w_ veenstra tube and pipe bender_ capacity 1 inch diameter_ clockwise rotation
1¼" PINES TUBE, PIPE and BAR BENDER
    Model 1400
THIS BENDER SOLD USE PHOTO, AS EXAMPLE
Equipped with Hydraulic Mandrel  Extractor
CLICK HERE FOR FRONT VIEW pines pipe and tube bender model 1400_ capacity 1.25 inch x 0.065_ bend direction horizontal and vertically_ counter clockwise rotation with mandrel extractor Front View       Rear View CLICK HERE FOR REAR VIEW pines pipe and tube bender model 1400_ capacity 1.25 inch x 0.065_ bend direction horizontal and vertically_ counter clockwise rotation with mandrel extractor
1½" LEONARD PNEUMATIC HORIZONTAL TUBE, PIPE and BAR BENDER
Bendmaster   Model PBOT
Clockwise Bend thru 195º arc
Capacity1½" Annealed Ferrous or Non-Ferrous
Radius Centerline 8"
Degree of Bend  10- Position Self-Indexing
Equipped with: Mandrel Extractor
    Die Cabinet     with Tooling      Inventory Reference B1804-9311 CLICK HERE FOR QUOTATION leonard bendmaster tube and pipe bender_ model PBOT_ capacity diameter 1.5 inch x 0.065 inch wall_ pneumatic driven_ 8 inch maximum radius_ with mandrel extractor and misc_ dies_ Ser 592
 CLICK HERE FOR PHOTO leonard bendmaster tube and pipe bender_ model PBOT_capacity diameter 1.5 inch x 0.065 inch wall_pneumatic driven_ 8 inch maximum radius_with mandrel extractor and misc. dies_ Ser 592_RIGHT SIDE VIEW Right side view       Left Side Control View  CLICK HERE FOR PHOTO leonard bendmaster tube and pipe bender_ model PBOT_capacity diameter 1.5 inch x 0.065 inch wall_pneumatic driven_ 8 inch maximum radius_with mandrel extractor and misc. dies_ Ser 592 LEFT CONTROL SIDE VIEW
 CLICK HERE FOR PHOTO leonard bendmaster tube and pipe bender_model PBOT_capacity diameter 1.5 inch x 0.065 inch wall_pneumatic driven_8 inch maximum radius_with mandrel extractor and miscelleneous dies_Serial 592_mandral extractor  Mandrel Extractor Pneumatic Cylinder View
 CLICK HERE FOR PHOTO leonard bendmaster tube and pipe bender_model PBOT_capacity diameter 1.5 inch x 0.065 inch wall_pneumatic driven_8 inch maximum radius_with mandrel extractor and misc dies_Serial 592_Mandrel Extractor End  Mandrel Extractor End View Bender

 

2" MING JEN HORIZONTAL TUBE, PIPE BENDER
Model  MJ-NC-50    Year Mfg. 8-1987
Clockwise  Horizontally thru.180°
Mild Steel Tube 35000 PSIG. 2" x 0.125"
Mild Steel, Pipe 1½" IPS Schedule 80
12" Bend Radius to Centerline (CLR)
80" Tube length (Over Mandrel)
Equipped with:  Hydraulic MANDREL EXTRACTOR
CLAMP DIE: Hydraulic toggle
PRESSURE DIE: Hydraulic toggle (Direct acting)
FOLLOWER SLIDE: Precision
BEND SPEED: Adjustable
1-5/8" DIE POST DIAMETER
(1) 2" x 7½" Radius Die    (1) Pressure Die      (1) Clamp Dies
(1) Mandrel Draw Rod 3/4" diameter     Inventory Reference B1804-9255   CLICK HERE FOR QUOTATION ming jen tube_ pipe and bar bender_ model MJ-NC-50_ capacity bend 2 inch diameter_ with mandrel extractor_ clockwisre rotation_ mfg 8-1987_ Ser 3224  CLICK HERE FOR PHOTO ming jen tube_ pipe and bar bender_ model MJ-NC-50_ capacity bend 2 inch diameter_ with mandrel extractor_ clockwisre rotation_ mfg 8-1987_ Ser 3224
 
 

2½" capacity  CLARK & LEWIS CNC HORIZONTAL TUBE, PIPE and BAR BENDER,
 Model CL200HD-CNC        Heavy Duty
Degree-O-Bend   &   Plain-O-Bend    Hydraulic Mandrel Extractor
Counter Clockwise thru 195º arc
Drop Away Clamp Die        10 hp. Drive        Operator Safety Pressure Mat. Mfg. May 1994      
Usage Meter Reads 529 hours        Inventory Reference  B1835-8769 CLICK HERE FOR QUOTATION clark and lewis cnc tube bender_ model CL200HD-CNC_ capacity 2.5 inch_ counter clockwise rotation_ with mandrel extractor plain and degree of bend_ date mfg 1992_ Ser 1234  CLICK HERE FOR PHOTO clark and lewis cnc tube bender_ model CL200HD-CNC_ capacity 2.5 inch_ counter clockwise rotation_ with mandrel extractor plain and degree of bend_ date mfg 1992_ Ser 1234.jpg



LIKE NEW CONDITION
3" CLARK & LEWIS HORIZONTAL TUBE, PIPE and BAR BENDER
 Model CL-300       Date Mfg. 12-20-87
Clockwise Bend thru 195º arc.
Capacity  Non-Ferrous 3" x 0.210" wall
    Ferrous  3" x 0.120" wall
    Stainless Steel 3" x 0.065" wall
    Schedule 80 Steel Pipe 2"  (2.375" x 0.218" IPS)
    Round Bar Mild Steel 1-7/8"
    Centerline Radius (Maximum Standard) 12"
Equipped with  DIGITAL BEND CONTROL with memory for up to 39 bends
    Hydraulic Mandrel Extractor    Collet Carriage for Plain of Bend
    Drop Away Clamp Die
*Out of US Government Long Term Storage  Very Little Use*
Inventory Reference B1804-9069 CLICK HERE FOR QUOTATION clark and lewis pipe and tube bender_ model CL300_ capacity bend 3 inch diameter x 0.210 inch_ counter clockwise rotation_mandrel extractor_ degree and plain a bend_bend radius 12 inch_ mfg 12-20-87
  CLICK HERE FOR PHOTO clark and lewis pipe_tube bender_model CL300_capacity bend 3 inch diameter x 0.210 inch_mandrel extractor_degree_plain a bend_bend radius 12 inch_mfg 12-1987_Serial 0785 Over-all Photo.         CLICK HERE FOR PHOTO clark and lewis pipe_tube bender_model CL300_capacity bend 3 inch diameter x 0.210 inch_mandrel extractor_degree_plain a bend_bend radius 12 inch_mfg 12-1987_Serial 0785 Press end.      Close Up Plain-A-Bend and Bend Stops. CLICK HERE FOR PHOTO clark and lewis pipe_tube bender_model CL300_capacity bend 3 inch diameter x 0.210 inch_mandrel extractor_degree_plain a bend_bend radius 12 inch_mfg 12-1987_Serial 0785_POB with Stops
CLICK HERE FOR PHOTO clark and lewis pipe_tube bender_model CL300_capacity bend 3 inch diameter x 0.210 inch_mandrel extractor_degree_plain a bend_bend radius 12 inch_mfg 12-1987_Serial 0785_Operator Control Station  Close-up Operator Control Station.         CLICK HERE FOR PHOTO clark and lewis pipe_tube bender_model CL300_capacity bend 3 inch diameter x 0.210 inch_mandrel extractor_degree_plain a bend_bend radius 12 inch_mfg 12-1987_Serial 0785_Mandrel Extractor  Close-up Mandrel Extractor. 




3" WALLACE HORIZONTAL PIPE, TUBE and BAR BENDER
 Model 500-3
 Counter Clockwise Bend thru 195º arc
 Capacity  Steel Tubing 3" diameter x 0.095" Wall
    IPS 2" x H
    Non  Ferrous  5" x .1/8" wall
Equipped with: Mandrel Extractor   Oscillator.  Auto Position    Pressure Die Hydraulic Booster
  Mandrel Carriage with power cross movement.
  (1 set) 2½" diameter Radial Die,  (1) Pressure Die, Clamp Die and Wiper Die.
  (1) Mandrel Rod with Mandrel.  Operator Control Station.
 Inventory Reference B1804-7117 CLICK HERE FOR QUOTE wallace horizontal pipe_tube bender_model 500-3_capacity 3 inch diameter x 0.095 inch wall_counter clockwise rotation_POB_DOB_pressure die booster_hydraulic mandrel extractor with oscillation_1-set of 2.5 inch diameter dies_Serial 1002007
 ALL PHOTOS TAKEN PRIOR REBUILD HYDRAULICS AND CLEAN-UP & PAINT
Check out photo of finished benders for what you can expect.
 CLICK HERE FOR PHOTO wallace horizontal pipe_tube bender_model 500-3_capacity 3 inch diameter x 0.095 inch wall_counter clockwise rotation_pain of bend_degree of bend_pressure die booster_hydraulic mandrel extractor with oscillation_2.5 inch die set and mandrel_Serial 100200_Over view  Over-all View.          View looking down Die Area CLICK HERE FOR PHOTO wallace horizontal pipe_tube bender_model 500-3_capacity 3 inch diameter x 0.095 inch wall_counter clockwise rotation_pain of bend_degree of bend_pressure die booster_hydraulic mandrel extractor with oscillation_2.5 inch die set and mandrel_Serial 100200_View looking down die area
CLICK HERE FOR PHOTO wallace horizontal pipe_tube bender_model 500-3_capacity 3 inch diameter x 0.095 inch wall_counter clockwise rotation_pain of bend_degree of bend_pressure die booster_hydraulic mandrel extractor with oscillation_2.5 inch die set and mandrel_Serial 100200_View Die area to Mandrel Extractor View Die area to Mandrel Extractor.        View Side showing Carriage Flip Stops  CLICK HERE FOR PHOTO wallace horizontal pipe_tube bender_model 500-3_capacity 3 inch diameter x 0.095 inch wall_counter clockwise rotation_pain of bend_degree of bend_pressure die booster_hydraulic mandrel extractor with oscillation_2.5 inch die set and mandrel_Serial 100200_View Side showing Carriage Flip Stops
 CLICK HERE FOR PHOTO wallace horizontal pipe_tube bender_model 500-3_capacity 3 inch diameter x 0.095 inch wall_counter clockwise rotation_pain of bend_degree of bend_pressure die booster_hydraulic mandrel extractor with oscillation_2.5 inch die set and mandrel_Serial 100200_View Plain of Bend & Oscillation Unit View Plain of Bend & Oscillation Unit.       View Oscillation Motor Drive CLICK HERE FOR PHOTO wallace horizontal pipe_tube bender_model 500-3_capacity 3 inch diameter x 0.095 inch wall_counter clockwise rotation_pain of bend_degree of bend_pressure die booster_hydraulic mandrel extractor with oscillation_2.5 inch die set and mandrel_Serial 100200_View Oscillation Motor Drive



3½" LEONARD CONRAC HORIZONTAL TUBE, PIPE and BAR BENDER
Model 72B    BENDMASTER
 Counter Clockwise Bend thru 195º arc
Capacity   Non-Ferrous 3½" x 0.120" wall
    Steel 3½" x 0.083" wall
    Stainless Steel 3" x 0.065" wall
    Steel Pipe 2" IPS
    Centerline Radius (Maximum Standard) 12"
    EXTRA LONG TUBE LENGTH 17 feet
Equipped with: Hydraulic Mandrel Extractor
                           Pressure Die Assist
                           Digital Degree of Bend Indexing
 Inventory Reference B1804-9493  CLICK HERE FOR QUOTATION leonard conrac pipe - tube bender_model 72B_bendmaster_capacity steel tubing 3.5 inch diameter x 0.083 inchl_counter clockwise rotation_mandrel extractor_bend radius 12 inch_extended bed 17 feet_digital degree of bend indexing
4¾" WALLACE HORIZONTAL TUBE, PIPE and BAR BENDER
Model 503
Capacity 3" Pipe
Hydraulic Mandrel Extractor   Inventory Reference  B1804-4388 CLICK HERE FOR PHOTO wallace pipe and tube bender_model 503-3_capacity bend mild steel 4.75 inch_counter clockwise horizontally thru 180 degrees_hydraulic mandrel extractor_Serial 7477
(This bender just sold view photo of example of finished product you can expect.)


8" COAST WALLACE  HORIZONTAL TUBE, PIPE and BAR BENDER
 Model 8HRD
 Inventory Reference  B1804-6633   Two photo's with-in  CLICK HERE FOR PHOTO coast wallace pipe_tube bender_ capacity 8 inch diameter_ model 8HRDT_full view
 Please note that this bender has been sold.

" VIEW PHOTO AS AN EXAMPLE OF HOW WE FINISH OUR MACHINES."






BENDERS: Tube, Pipe & Bar CNC    B1835-

2" MING JEN HORIZONTAL TUBE, PIPE BENDER
Model  MJ-NC-50,    Year Mfg. 8-1987
Clockwise   Horizontally thru 180°
Mild Steel Tube  35,000 PSIG  2" x 0.125"
Mild Steel  Pipe 1½" IPS Sched. 80
12" Bend Radius to Centerline (CLR)
80" Tube length (Over Mandrel)
Equipped with:  Hydraulic MANDREL EXTRACTOR
CLAMP DIE: Hydraulic toggle
PRESSURE DIE: Hydraulic toggle (Direct acting)
FOLLOWER SLIDE: Precision
BEND SPEED: Adjustable
1-5/8" DIE POST DIAMETER
(1) 2" x 7½" Radius Die   (1) Pressure Die     (1) Clamp Dies
(1) Mandrel Draw Rod 3/4" diameter   Inventory Reference  B1804-9255  CLICK HERE FOR QUOTATION ming jen tube_ pipe and bar bender_ model MJ-NC-50_ capacity bend 2 inch diameter_ with mandrel extractor_ clockwisre rotation_ mfg 8-1987_ Ser 3224  CLICK HERE FOR PHOTO ming jen tube_ pipe and bar bender_ model MJ-NC-50_ capacity bend 2 inch diameter_ with mandrel extractor_ clockwisre rotation_ mfg 8-1987_ Ser 3224



2½" capacity CLARK & LEWIS CNC HORIZONTAL TUBE  PIPE and BAR BENDER
 Model CL200HD-CNC     Heavy Duty      Mfg. 5-1994
 Counter Clockwise Bend thru 195º arc
Degree-O-Bend  &  Plain-O-Bend
 Hydraulic Mandrel Extractor
Drop Away Clamp Die
Hydraulic Pump Drive 10 hp
 Equipped with: Operators Control Station.   Operator Safety Pressure Mat
 Usage Meter Reads 529 hours      Inventory Reference B1835-8769 CLICK HERE FOR QUOTATION clark and lewis cnc tube bender_ model CL200HD-CNC_ capacity 2.5 inch_ counter clockwise rotation_ with mandrel extractor plain and degree of bend_ date mfg 1992_ Ser1234  CLICK HERE FOR PHOTO clark and lewis cnc tube bender_ model CL200HD-CNC_ capacity 2.5 inch_ counter clockwise rotation_ with mandrel extractor plain and degree of bend_ date mfg 1992_ Ser1234





BENDERS: Tube, Pipe & Bar
WITHOUT MANDREL EXTRACTORS    B1804-

" If you don't see what you want "
"PLEASE"
Call  1-213-627-2847
Fax  1-213-627-2499
 E-Mail us your Current  or Future requirements at:
sales@centurymachinery.com
THANK YOU