"USE THIS SCROLL BAR to view all items"►
Metal Disintegrator at bottom of list             


Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, DRILL CATEGORIES ARE IN ALPHABETICAL ORDER.

DRILLS: BORER & MORTISER  D6620-                                                 USE THIS SCROLL BAR TO VIEW CATEGORIES DOWN ▬▬▬▬►
DRILLS: SINGLE SPINDLE   D4810-
DRILLS: LAYOUT  D5202-
DRILLS: MULTIPLE SPINDLES    D4803-
DRILLS: TURRET   D6402-
COMBINATION Drill, Lathe, Sander & Table Saw 
ELECTRICAL DISCHARGE MACHINES Ref. E2425-  & Electro Arc
METAL DISINTEGRATOR Ref. D2827-

 

If you require a Quote Sheet PLEASE  send  us your requirements:
CENTURY MACHINERY COMPANY INC.
1937 South Santa Fe Avenue
Los Angeles, California 90021

Email   sales@centurymachinery.com
Website   www.centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499


SPECIAL 78 year in business discounted price on all items listed below "CALL".


DRILLS: BORER & MORTISER  D6620-


ROOT  VERTICAL BORING and MORTISER DRILLING MACHINE   Model G250
Single Spindle
Throat Depth 40"
Chuck Capacity 1/8" thru 5/8"
Spindle Travel 9"
Spindle Speeds: 3,420/1,700 rpm.
Table Size 24" x 32"     Table Tilt 45°
Table Angle Left to Right 36°
Table Knee Adjust Up & Down 12"
Motor Drive 2 hp  
Inventory Reference D6620-5488 CLICK HERE FOR QUOTATION root single spindle vertical borer and mortiser_ model G-250_ 20 inch throat_ tilting and swiveling table 24 inch x 32 inch_ spindle travel 9 inch_ chuck 0.6250 inch_Serial Number 765C5



 

DRILLS: SINGLE SPINDLE   D4810-

14" ROCKWELL DRILL PRESS,  Floor Type
Single Spindle
Drill Chuck Spindle
Spindle Speed Change by step pulley
Spindle Quill Manual Down Feed 3½"
Main Drive 1/2 hp 115 volts Single Phase
Equipped with:
   1/2" Drill Chuck.
   Start -Stop Button and Foot Start Trip
   Point of Operation Safety Guard.
   Mounted on Pedestal
Inventory Reference  D4810-9974



15" POWERMATIC DRILL PRESS  Floor Type
Single Spindle
Spindle Taper 2MT
Variable Spindle Speed 500 thru 4,000 rpm.
Main Drive ¾ hp
Equipped with  ½" Drill Chuck
Inventory Reference D4810-9256



17" DELTA ROCKWELL DRILL PRESS,  Floor Type
Single Spindle
Spindle Taper 2MT
Spindle Speed Change by step pulley
Quill Manual Down Feed 6"
Main Drive 3/4 hp   Inventory Reference  D4810-9438 CLICK HERE FOR PHOTO delta 17 inch pedestal drill press_ spindel taper 2 mt_ quill travel 5 inch_ table 24 inch x 36 inch_ single phase motor 0.75 hp Photo



24" ALLEN HIGH SPEED DRILL PRESS
Single Spindle
Box Column
Spindle 1/2" DRILL CHUCK
4 Spindle Speeds  1250 thru 4960 rpm
Quill Travel, 3⅛"   Hand Down Feed
Spindle Head Adjusts 5½"
Wet Table 21" x 26½"
Table Knee Adjustment Up and Down thru 11"
Main Drive 1/2 hp
Equipped with  1/2" Drill Chuck
NOTE this is heavy duty cast iron drill.
Inventory Reference  D4810-9961 CLICK HERE FOR QUOTATION allen high speed single spindle box column drill press_capacity throat 24 inch_manual feed spindle with 0.50 inch drill chuck_spindle speeds 1250-1985-3125-4960 rpm_rise & fall table 21 inch x 26.5 inch_Serial Number HMD-29432



24" AVEY DRILL PRESS
Single Spindle
Spindle Taper 4MT
(6) Spindle Speeds 95 thru 1,130 rpm.
8" Quill Travel, Manual & Power Down Feed
Spindle Head Adjusts 10"
Table 25" x 34" with Knee Adjustment Up and Down thru 17"
Main Drive 5 hp
Equipped with: Coolant Pump
Inventory Reference D4810-6476 CLICK HERE FOR QUOTATION avey single spindle drill press_size 3_throat 24 inch_6-spindle speeds 95 - 1130 rpm_spindle taper 4-MT_manual and power down feed_quill travel 8 inch_sliding head 10 inch_travel_table size 25 inch x 34 inch_spindle drive 5 hp_coolant pump_Serial Number 30564



24" FOSDICK DRILL PRESS
Single Spindle
Spindle Taper 3MT
Quill Manual Down Feed thru 6"
(4) Spindle Speeds 110-3600 rpm
Table Size 24" x 24" T-Slotted     Wet Type
Table Knee Adjustment  Up and Down Manually thru 14"
Main Drive 2 hp
Equipped with  Coolant Pump
Inventory Reference D4810-5832 CLICK HERE FOR QUOTATION fosdick drill press_single spindle_throat capacity 24 inch_spindle taper 3mt_spindle speeds 130 thru 3600 rpm_table size 24 inch x 24 inch_table adjust 14 inch_Serial Number 12402  CLICK HERE FOR PHOTO: fosdick drill press_single spindle_throat capacity 24 inch_spindle taper 3mt_spindle speeds 130 thru 3600 rpm_table size 24 inch x 24 inch_table adjust 14 inch Photo



24" CLEERMAN SINGLE SPINDLE DRILL PRESS
Box Column
Spindle Taper 4MT
12- Spindle Speeds 75 thru 1,500 rpm
Quill Travel, Power Down Feed
EXTRA HEIGHT Spindle to Table 36½"
Compound Table 18" X 29½"
     Travel X - Y Axis  by hand feed
Table Knee Adjustment Up and Down thru 14"
Main Drive 5 hp
Equipped with: Coolant Pump
Inventory Reference D4810-10066  CLICK HERE FOR QUOTATION cleerman drill machine – drill press_type box column_single vertical drilling spindle_capacity 24” throat diameter_spindle 4 taper_12- spindle speeds 75 thru1500 RPM_quill travel Z-axis 12” manually and power_nine power quill feeds per revolution of spindle 5 thru 45_distance spindle to table_table down – spindle up 36.5”_spindle sliding head travel manually up and down thru16⅜"_compound table wet type - has X & Y axis travel_table has three T- slots_table working surface 16" FB x 29½" LR_table longitudinal travel to right 14¼" and to left 15¾"_table cross travel 15¾"_table longitudinal and cross movement has both fine and coarse feed by hand crank_table knee adjustment up and down Z-axis by hand crank thru 10"_motor drive are wired 440 volts – three phase_spindle drive 5 H.P. 220 / 440 volts_coolant pump 1/10 H.P. 220 / 440 volts_control with on/off buttons -coolant on/off buttons_spindle forward reverse switch_equipped with work light_ Serial Number 25C-1669_dimensions 60” FB x 45” LR x 108” height spindle down_Approx weight 4300 lbs.   CLICK HERE FOR PHOTO cleerman drill machine – drill press_type box column_single vertical drilling spindle_capacity 24” throat diameter_spindle 4 taper_12- spindle speeds 75 thru1500 RPM_quill travel Z-axis 12” manually and power_nine power quill feeds per revolution of spindle 5 thru 45_distance spindle to table_table down – spindle up 36.5”_spindle sliding head travel manually up and down thru16⅜"_compound table wet type - has X & Y axis travel_table has three T- slots_table working surface 16" FB x 29½" LR_table longitudinal travel to right 14¼" and to left 15¾"_table cross travel 15¾"_table longitudinal and cross movement has both fine and coarse feed by hand crank_table knee adjustment up and down Z-axis by hand crank thru 10"_motor drive are wired 440 volts – three phase_spindle drive 5 H.P. 220 / 440 volts_coolant pump 1/10 H.P. 220 / 440 volts_control with on/off buttons -coolant on/off buttons_spindle forward reverse switch_equipped with work light_ Serial Number 25C-1669_dimensions 60” FB x 45” LR x 108” height spindle down_Approx weight 4300 lbs. Photo.

▲▼PHOTO OF BOTH CLEERMAN DRILLS CLICK HERE FOR PHOTO OF BOTH CLEERMAN DRILLS Ref: D4810-10066_CLEEREMAN DRILLING MACHINE_DRILL PRESS_Serial Number 25C-1669_CAPACITY THROAT 24"_SPINDLE: 12- Speeds 75 thru 1500 RPM_DISTANCE SPINDLE to TABLE 36½”_COMPOUND TABLE: X-Y Axis_Table Working Surface 16" FB x 29½" LR_Table Longitudinal Travel Right 14¼" & Left 15¾"_Table Cross Travel 15¾"_MOTOR DRIVE 5 Hp__ Ref. D4810-10068_CLEEREMAN DRILLING MACHINE_Serial Number 25C-1575_CAPACITY THROAT 24"_SPINDLE: 24-Speeds - Low Range 37 thru 750 RPM and High Range 75 thru 1500 RPM_DISTANCE SPINDLE to TABLE Table down – Spindle Up 23¼”_COMPOUND TABLE:X-Y Axis_Table Working Surface:16" FB x 29½" LR_Table Longitudinal Travel Right 14¼" & Left 15¾"_Table Cross Travel 15¾"_Table Longitudinal & Cross movement with Fine & Coarse movement_MOTOR DRIVE 7½ Hp. Photo.

24" CLEERMAN SINGLE SPINDLE DRILL PRESS
Box Column
Spindle Taper 4MT
24- Spindle Speeds:
   Low Range  37.5 thru 750 rpm.
   High Range 75 thru 1,500 rpm.
Quill Travel, Power Down Feed
Distance Spindle to Table 23¼
Compound Table 16" X 29½"
     Travel X - Y Axis  by hand feed.
     Table X-Y Feeds Fine & Coarse
Table Knee Adjustment Up and Down thru 10"
Main Drive 7½ hp
Equipped with: Coolant Pump
Inventory Reference D4810-10068  CLICK HERE FOR QUOTATION cleerman drill machine – drill press_type box column_single vertical drilling spindle_capacity 24” throat diameter_spindle 4 taper_24- spindle speeds 37.5 thru1500 RPM_quill travel Z-axis 12” manually and power_nine power quill feeds per revolution of spindle 5 thru 45_distance spindle to table_table down – spindle up 23.25”_spindle sliding head travel manually up and down thru16⅜"_compound table wet type - has X & Y axis travel_table has three T- slots_table working surface 16" FB x 29½" LR_table longitudinal travel to right 14¼" and to left 15¾"_table cross travel 15¾"_table longitudinal and cross movement has both fine and coarse feed by hand crank_table knee adjustment up and down Z-axis by hand crank thru 10"_motor drive are wired 440 volts – three phase_spindle drive 7.5 H.P. 220 / 440 volts_coolant pump 1/10 H.P. 220 / 440 volts_control with on/off buttons -coolant on/off buttons_spindle forward reverse switch_equipped with work light_ Serial Number 25C-1575_dimensions 60” FB x 45” LR x 96” height spindle down_Approx weight 4200 lbs.  CLICK HERE FOR PHOTO cleerman drill machine – drill press_type box column_single vertical drilling spindle_capacity 24” throat diameter_spindle 4 taper_24- spindle speeds 37.5 thru 1500 RPM_quill travel Z-axis 12” manually and power_nine power quill feeds per revolution of spindle 5 thru 45_distance spindle to table_table down – spindle up 23.25”_spindle sliding head travel manually up and down thru16⅜"_compound table wet type - has X & Y axis travel_table has three T- slots_table working surface 16" FB x 29½" LR_table longitudinal travel to right 14¼" and to left 15¾"_table cross travel 15¾"_table longitudinal and cross movement has both fine and coarse feed by hand crank_table knee adjustment up and down Z-axis by hand crank thru 10"_motor drive are wired 440 volts – three phase_spindle drive 7.5 H.P. 220 / 440 volts_coolant pump 1/10 H.P. 220 / 440 volts_control with on/off buttons -coolant on/off buttons_spindle forward reverse switch_equipped with work light_ Serial Number 25C-1575_dimensions 60” FB x 45” LR x 96” height spindle down_Approx weight 4200 lbs. Photo.



"New"  27½" ANG DRILL PRESS     Model Z-5032-A
Round Column
CAPACITY: DRILLING 1.2598” (32mm)    TAPPING 0.787” (M20mm)
Spindle Taper 4 MT
12- Spindle Speed two Speed ranges 85 - 3120 rpm
Quill Travel, Manually & Power Down Feed
Spindle Head Tilts ± 55 degrees & Moves Up & Down
Height Under Spindle Nose to:
      Table 25.59"          Base 47.24”
Table Tilts & Rotates
     Working Surface 19⅝"LR x 17¾" FB
      Adjustment Up/Down thru 15"
Equipped with:
     Tapping.  Tool Setting & Dismounting Button.
     1- Drill Chuck.   2-Morse Taper Reduction Sleeves.
     Coolant Pump & Tank.
     Work Light.  Point of Operation Drill Guard.
Motor Drive 1.3 Hp / 2 Hp
Inventory Reference D4810-10091   CLICK HERE FOR QUOTATION ANG DRILL PRESS_model Z-5032-A_capacity throat to column 27½" - 350mm diameter_drilling capacity 1.2598” - 32mm_tapping capacity 0.787” - M20mm_4 spindle taper_spindle quill travel manually and power thru 6.29" -160mm_feed per revolution of spindle 0.3 - 0.2 - 0.1 ipm_12- spindle speed 85 thru 3120 rpm thu two speed ranges_spindle head tilts ± 55 degrees_spindle head travel adjust manually up - down on rack 5¼" - 133.4mm_height under spindle nose to table 25.59" - 630mm_ height under spindle nose to base 47.24” - 1200mm_T-slotted table wet type_table working surface19⅝" LR x 17¾" FB - 500 x 400mm_table tilts ± 55 degrees_table rotates180 degrees_table adjustment up-down by hand crank thru 15" - 381mm_equipped with round column_tapping fuction_tool setting and dismounting button_coolant pump and tank_work light_point of operation drill guard_operator controls start stop buttons_emergency stop buttons_ spindle direction switch_coolant on - off_work light on-off_motor drive 1-1.5 kw 2 hp wired 220 volts 3 phase_dimensions: 20” LR x 36” FB x 83” Ht_Approx. Wt 1150 lbs_Serial Number K03066_condition NEW
CLICK HERE FOR PHOTO ANG DRILL PRESS_model Z-5032-A_capacity throat to column 27½" - 350mm diameter_drilling capacity 1.2598” - 32mm_tapping capacity 0.787” - M20mm_4 spindle taper_spindle quill travel manually and power thru 6.29" -160mm_feed per revolution of spindle 0.3 - 0.2 - 0.1 ipm_12- spindle speed 85 thru 3120 rpm thu two speed ranges_spindle head tilts ± 55 degrees_spindle head travel adjust manually up - down on rack 5¼" - 133.4mm_height under spindle nose to table 25.59" - 630mm_ height under spindle nose to base 47.24” - 1200mm_T-slotted table wet type_table working surface19⅝" LR x 17¾" FB - 500 x 400mm_table tilts ± 55 degrees_table rotates180 degrees_table adjustment up-down by hand crank thru 15" - 381mm_equipped with round column_tapping fuction_tool setting and dismounting button_coolant pump and tank_work light_point of operation drill guard_operator controls start stop buttons_emergency stop buttons_ spindle direction switch_coolant on - off_work light on-off_motor drive 1-1.5 kw 2 hp wired 220 volts 3 phase_dimensions: 20” LR x 36” FB x 83” Ht_Approx. Wt 1150 lbs_Serial Number K03066_condition NEW_Photo Right Side Photo Right Side.     CLICK HERE FOR PHOTO ANG DRILL PRESS_model Z-5032-A_capacity throat to column 27½" - 350mm diameter_drilling capacity 1.2598” - 32mm_tapping capacity 0.787” - M20mm_4 spindle taper_spindle quill travel manually and power thru 6.29" -160mm_feed per revolution of spindle 0.3 - 0.2 - 0.1 ipm_12- spindle speed 85 thru 3120 rpm thu two speed ranges_spindle head tilts ± 55 degrees_spindle head travel adjust manually up - down on rack 5¼" - 133.4mm_height under spindle nose to table 25.59" - 630mm_ height under spindle nose to base 47.24” - 1200mm_T-slotted table wet type_table working surface19⅝" LR x 17¾" FB - 500 x 400mm_table tilts ± 55 degrees_table rotates180 degrees_table adjustment up-down by hand crank thru 15" - 381mm_equipped with round column_tapping fuction_tool setting and dismounting button_coolant pump and tank_work light_point of operation drill guard_operator controls start stop buttons_emergency stop buttons_ spindle direction switch_coolant on - off_work light on-off_motor drive 1-1.5 kw 2 hp wired 220 volts 3 phase_dimensions: 20” LR x 36” FB x 83” Ht_Approx. Wt 1150 lbs_Serial Number K03066_condition NEW_Photo Left Side Photo Left Side.    CLICK HERE FOR PHOTO ANG DRILL PRESS_model Z-5032-A_capacity throat to column 27½" - 350mm diameter_drilling capacity 1.2598” - 32mm_tapping capacity 0.787” - M20mm_4 spindle taper_spindle quill travel manually and power thru 6.29" -160mm_feed per revolution of spindle 0.3 - 0.2 - 0.1 ipm_12- spindle speed 85 thru 3120 rpm thu two speed ranges_spindle head tilts ± 55 degrees_spindle head travel adjust manually up - down on rack 5¼" - 133.4mm_height under spindle nose to table 25.59" - 630mm_ height under spindle nose to base 47.24” - 1200mm_T-slotted table wet type_table working surface19⅝" LR x 17¾" FB - 500 x 400mm_table tilts ± 55 degrees_table rotates180 degrees_table adjustment up-down by hand crank thru 15" - 381mm_equipped with round column_tapping fuction_tool setting and dismounting button_coolant pump and tank_work light_point of operation drill guard_operator controls start stop buttons_emergency stop buttons_ spindle direction switch_coolant on - off_work light on-off_motor drive 1-1.5 kw 2 hp wired 220 volts 3 phase_dimensions: 20” LR x 36” FB x 83” Ht_Approx. Wt 1150 lbs_Serial Number K03066_condition NEW_Photo Front view Spindle Head Photo Front view Spindle Head.
CLICK HERE FOR PHOTO ANG DRILL PRESS_model Z-5032-A_capacity throat to column 27½" - 350mm diameter_drilling capacity 1.2598” - 32mm_tapping capacity 0.787” - M20mm_4 spindle taper_spindle quill travel manually and power thru 6.29" -160mm_feed per revolution of spindle 0.3 - 0.2 - 0.1 ipm_12- spindle speed 85 thru 3120 rpm thu two speed ranges_spindle head tilts ± 55 degrees_spindle head travel adjust manually up - down on rack 5¼" - 133.4mm_height under spindle nose to table 25.59" - 630mm_ height under spindle nose to base 47.24” - 1200mm_T-slotted table wet type_table working surface19⅝" LR x 17¾" FB - 500 x 400mm_table tilts ± 55 degrees_table rotates180 degrees_table adjustment up-down by hand crank thru 15" - 381mm_equipped with round column_tapping fuction_tool setting and dismounting button_coolant pump and tank_work light_point of operation drill guard_operator controls start stop buttons_emergency stop buttons_ spindle direction switch_coolant on - off_work light on-off_motor drive 1-1.5 kw 2 hp wired 220 volts 3 phase_dimensions: 20” LR x 36” FB x 83” Ht_Approx. Wt 1150 lbs_Serial Number K03066_condition NEW_Photo Left Side Spindle Head Rise & Fall_Electric Controls and Work Light Photo Left Side Spindle Head Rise & Fall, Electric Controls.
CLICK HERE FOR PHOTO ANG DRILL PRESS_model Z-5032-A_capacity throat to column 27½" - 350mm diameter_drilling capacity 1.2598” - 32mm_tapping capacity 0.787” - M20mm_4 spindle taper_spindle quill travel manually and power thru 6.29" -160mm_feed per revolution of spindle 0.3 - 0.2 - 0.1 ipm_12- spindle speed 85 thru 3120 rpm thu two speed ranges_spindle head tilts ± 55 degrees_spindle head travel adjust manually up - down on rack 5¼" - 133.4mm_height under spindle nose to table 25.59" - 630mm_ height under spindle nose to base 47.24” - 1200mm_T-slotted table wet type_table working surface19⅝" LR x 17¾" FB - 500 x 400mm_table tilts ± 55 degrees_table rotates180 degrees_table adjustment up-down by hand crank thru 15" - 381mm_equipped with round column_tapping fuction_tool setting and dismounting button_coolant pump and tank_work light_point of operation drill guard_operator controls start stop buttons_emergency stop buttons_ spindle direction switch_coolant on - off_work light on-off_motor drive 1-1.5 kw 2 hp wired 220 volts 3 phase_dimensions: 20” LR x 36” FB x 83” Ht_Approx. Wt 1150 lbs_Serial Number K03066_condition NEW_Photo Close Up Table Rise Fall & Tilt and Coolant Pump Left Side view Photo Close Up Table Rise Fall & Tilt and Coolant Pump Left Side view.
CLICK HERE FOR PHOTO ANG DRILL PRESS_model Z-5032-A_capacity throat to column 27½" - 350mm diameter_drilling capacity 1.2598” - 32mm_tapping capacity 0.787” - M20mm_4 spindle taper_spindle quill travel manually and power thru 6.29" -160mm_feed per revolution of spindle 0.3 - 0.2 - 0.1 ipm_12- spindle speed 85 thru 3120 rpm thu two speed ranges_spindle head tilts ± 55 degrees_spindle head travel adjust manually up - down on rack 5¼" - 133.4mm_height under spindle nose to table 25.59" - 630mm_ height under spindle nose to base 47.24” - 1200mm_T-slotted table wet type_table working surface19⅝" LR x 17¾" FB - 500 x 400mm_table tilts ± 55 degrees_table rotates180 degrees_table adjustment up-down by hand crank thru 15" - 381mm_equipped with round column_tapping fuction_tool setting and dismounting button_coolant pump and tank_work light_point of operation drill guard_operator controls start stop buttons_emergency stop buttons_ spindle direction switch_coolant on - off_work light on-off_motor drive 1-1.5 kw 2 hp wired 220 volts 3 phase_dimensions: 20” LR x 36” FB x 83” Ht_Approx. Wt 1150 lbs_Serial Number K03066_condition NEW_Photo Close Up Table Right Side view. Photo Close Up Table Right Side view.



26" LELAND GIFFORD DRILL PRESS
Single Spindle
Spindle Taper 2MT
Quill Travel Travel Manually thru 8½"
(8) Spindle Speeds 150 thru 1,800 rpm   4-Speed Motor
Table Size 25" x 37"
Table Knee Adjustment  Up and Down thru 18" 
 Inventory Reference D4810-5790 CLICK HERE FOR QUOTATION leLand gifford drill press_single spindle_throat capacity 26 inch_model 2LMS_spindle speeds 150 to 1800 rpm_spindle taper 2 mt_spindle travel 8.5 inch_table 25 inch x 37.5 inch



26" BUFFALO DRILL PRESS
Model 3B RPMSTER    Mfg Date1981
Single Spindle
Maximum swing at table 30"
Spindle Taper 5MT
Quill Travel Travel Manually thru 8½"
Infinitely Variable Spindle Speeds 0 thru 2,500 rpm
  Spindle Speeds in back gear 0 thru 430
Wet Table Size 23" diameter
Table Knee Adjustment  Up and Down
Equipped with  Coolant Pump
Inventory Reference D4810-9489 CLICK HERE FOR QUOTATION buffalo single spindle drill press_model 3B-RPMaster_capacity throat 30 inch_manual and power down feed spindle quill_2- spindle speed range infinitely variable thru 2500 rpm_spindle quill travel 9.75 inch with number 5 MT_round table 23.375 inch with coolant trough_motor drive 5 hp_round column_Serial Number 81-3493
PHOTOS BELOW TAKEN PRIOR TO CLEAN-UP & PAINT
▼                                                              ▼
CLICK HERE FOR PHOTO: buffalo single spindle drill press_model 3B-RPMaster_capacity throat 30 inch_manual and power down feed spindle quill_2- spindle speed range infinitely variable thru 2500 rpm_spindle quill travel 9.75 inch with number 5 MT_round table 23.375 inch with coolant trough_motor drive 5 hp_round column_Serial Number 81-3493_Photo Right Side to Front view. Photo Right Side to Front view.       CLICK HERE FOR PHOTO: buffalo single spindle drill press_model 3B-RPMaster_capacity throat 30 inch_manual and power down feed spindle quill_2- spindle speed range infinitely variable thru 2500 rpm_spindle quill travel 9.75 inch with number 5 MT_round table 23.375 inch with coolant trough_motor drive 5 hp_round column_Serial Number 81-3493_Photo Spindle & Power Feed. Photo Spindle & Power Feed.




30" EDLUND DRILL PRESS
Model 2F15
Single Spindle
Box Column
Spindle Taper 2MT
Variable Spindle Speeds  075thru 1,800 rpm
   with Back Gear
Quill Travel, 12"
Wet Table 24" x 36"
Table Knee Adjustment Up and Down thru 12"
Main Drive 1⅞ hp
Equipped with  Drill Chuck
Inventory Reference  D4810-9765  CLICK HERE FOR QUOTATION edlund single spindle drill press_capacity throat 30 inch_model 2F15_box column_spindle taper 2 mt_manual feed_variable spindle speeds 75 - 1500 rpm_with back gear_Serial Number 64390   CLICK HERE FOR PHOTO edlund single spindle drill press_capacity throat 30 inch_model 2F15_box column_spindle taper 2 mt_manual feed_variable spindle speeds 75 - 1500 rpm_with back gear_Serial 64390 Photo



CONVERT SLIDING HEAD DRILL INTO A:
LEAD SCREW TAPPER with this unit.
Equipped with:   Spindle Taper 2MT.
  Tap Collet Holder fits into 2 MT Spindle.
  Collet excepts 5/8" shank tap.
  Adjustable Depth Feed Control.
  2- Remote  Push Buttons Stations for Lead Screw Run / Jog and Cycle Stop.
  Electric Controls.
You may remove Tap Collet Holder and place larger tap using Spindle with Number 2 MT
CLICK HERE FOR PHOTO lead screw tapping unit_Front View Down Front view.   CLICK HERE FOR PHOTO lead screw tapping unit_Close up Tap End Close-up view Tap Holder.    CLICK HERE FOR PHOTO lead screw tapping unit_Front and Right Side view over-al Close-up view Tap Holder.
CLICK HERE FOR PHOTO lead screw tapping unit_Left side Close-up view Left Side.
Inventory Reference T1753-9818

 

DO YOU NEED DRILLS??    We have:
             "NEW" Cobalt Drills   1/16" thru 3/4"                        Made in USA
" NEW & USED"  High Speed Drills 1/16" thru 1-1/2 "
We sell by the Piece  or  by the Pound
*Up to 60% Savings Off New List Price*

Email us your requirement at:  sales@centurymachinery.com




 

THIS IS JUST A SMALL SAMPLE OF THE MANY SINGLE SPINDLE DRILL
THAT WE HAVE IN STOCK.  **Please Call, Fax or Email
 If you don't see what you want
Please Call  1- 213-627-2847
              Fax  1- 213-627-2499
                                               E-mail    sales@centurymachinery.com


 

 

DRILLS: LAYOUT  D5202-

TABLE TRAVEL  2 & 3 AXIS

24" CINCINNATI BICKFORD SINGLE SPINDLE DRILL PRESS  Super Service
Box Column
Spindle Taper 4MT
(9) Spindle Speeds 90 thru 1,000 rpm
Quill Travel, Power Down Feed
Table 17⅞" X 27⅞"
2-Axis Table  Travel X - Y Axis  hand feed
Table Knee Adjustment Up and Down thru 14"
Main Drive 5 hp
Equipped with: Coolant Pump
Inventory Reference D4810-9410 CLICK HERE FOR QUOTATION cincinnati bickford single spindle drill press_ capacity 24 inch_ super service_ spower feed spindle 4 mt_ spindle speeds 60 - 1000 rpm_ X-Y axis table_Serial Number 2L1653   CLICK HERE FOR PHOTO cincinnati bickford single spindle drill press_capacity 24 inch_super service_box column_power feed_4 mt_power feed_speeds 60 - 1000 rpm_X-Y axis table Photo



24" CLEERMAN SINGLE SPINDLE DRILL PRESS
Box Column
Spindle Taper 4MT
(9) Spindle Speeds 50 thru 1,500 rpm
Quill Travel, Power Down Feed
Table 18" X 24"
2-Axis Table  Travel X - Y Axis  hand feed
Table Knee Adjustment Up and Down thru 14"
Main Drive 7½ hp
Equipped with: Coolant Pump
Inventory Reference D4810-10068

 

"New"  27½" ANG DRILL PRESS     Model Z-5032-A
Round Column
CAPACITY: DRILLING 1.2598” (32mm)    TAPPING 0.787” (M20mm)
Spindle Taper 4 MT
12- Spindle Speed two Speed ranges 85 - 3120 rpm
Quill Travel, Manually & Power Down Feed
Spindle Head Tilts ± 55 degrees & Moves Up & Down
Height Under Spindle Nose to:
      Table 25.59"          Base 47.24”
Table Tilts & Rotates
     Working Surface 19⅝"LR x 17¾" FB
      Adjustment Up/Down thru 15"
Equipped with:
     Tapping.  Tool Setting & Dismounting Button.
     1- Drill Chuck.   2-Morse Taper Reduction Sleeves.
     Coolant Pump & Tank.
     Work Light.  Point of Operation Drill Guard.
Motor Drive 1.3 Hp / 2 Hp
Inventory Reference D4810-10091   CLICK HERE FOR QUOTATION ANG DRILL PRESS_model Z-5032-A_capacity throat to column 27½" - 350mm diameter_drilling capacity 1.2598” - 32mm_tapping capacity 0.787” - M20mm_4 spindle taper_spindle quill travel manually and power thru 6.29" -160mm_feed per revolution of spindle 0.3 - 0.2 - 0.1 ipm_12- spindle speed 85 thru 3120 rpm thu two speed ranges_spindle head tilts ± 55 degrees_spindle head travel adjust manually up - down on rack 5¼" - 133.4mm_height under spindle nose to table 25.59" - 630mm_ height under spindle nose to base 47.24” - 1200mm_T-slotted table wet type_table working surface19⅝" LR x 17¾" FB - 500 x 400mm_table tilts ± 55 degrees_table rotates180 degrees_table adjustment up-down by hand crank thru 15" - 381mm_equipped with round column_tapping fuction_tool setting and dismounting button_coolant pump and tank_work light_point of operation drill guard_operator controls start stop buttons_emergency stop buttons_ spindle direction switch_coolant on - off_work light on-off_motor drive 1-1.5 kw 2 hp wired 220 volts 3 phase_dimensions: 20” LR x 36” FB x 83” Ht_Approx. Wt 1150 lbs_Serial Number K03066_condition NEW
CLICK HERE FOR PHOTO ANG DRILL PRESS_model Z-5032-A_capacity throat to column 27½" - 350mm diameter_drilling capacity 1.2598” - 32mm_tapping capacity 0.787” - M20mm_4 spindle taper_spindle quill travel manually and power thru 6.29" -160mm_feed per revolution of spindle 0.3 - 0.2 - 0.1 ipm_12- spindle speed 85 thru 3120 rpm thu two speed ranges_spindle head tilts ± 55 degrees_spindle head travel adjust manually up - down on rack 5¼" - 133.4mm_height under spindle nose to table 25.59" - 630mm_ height under spindle nose to base 47.24” - 1200mm_T-slotted table wet type_table working surface19⅝" LR x 17¾" FB - 500 x 400mm_table tilts ± 55 degrees_table rotates180 degrees_table adjustment up-down by hand crank thru 15" - 381mm_equipped with round column_tapping fuction_tool setting and dismounting button_coolant pump and tank_work light_point of operation drill guard_operator controls start stop buttons_emergency stop buttons_ spindle direction switch_coolant on - off_work light on-off_motor drive 1-1.5 kw 2 hp wired 220 volts 3 phase_dimensions: 20” LR x 36” FB x 83” Ht_Approx. Wt 1150 lbs_Serial Number K03066_condition NEW_Photo Right Side Photo Right Side.     CLICK HERE FOR PHOTO ANG DRILL PRESS_model Z-5032-A_capacity throat to column 27½" - 350mm diameter_drilling capacity 1.2598” - 32mm_tapping capacity 0.787” - M20mm_4 spindle taper_spindle quill travel manually and power thru 6.29" -160mm_feed per revolution of spindle 0.3 - 0.2 - 0.1 ipm_12- spindle speed 85 thru 3120 rpm thu two speed ranges_spindle head tilts ± 55 degrees_spindle head travel adjust manually up - down on rack 5¼" - 133.4mm_height under spindle nose to table 25.59" - 630mm_ height under spindle nose to base 47.24” - 1200mm_T-slotted table wet type_table working surface19⅝" LR x 17¾" FB - 500 x 400mm_table tilts ± 55 degrees_table rotates180 degrees_table adjustment up-down by hand crank thru 15" - 381mm_equipped with round column_tapping fuction_tool setting and dismounting button_coolant pump and tank_work light_point of operation drill guard_operator controls start stop buttons_emergency stop buttons_ spindle direction switch_coolant on - off_work light on-off_motor drive 1-1.5 kw 2 hp wired 220 volts 3 phase_dimensions: 20” LR x 36” FB x 83” Ht_Approx. Wt 1150 lbs_Serial Number K03066_condition NEW_Photo Left Side Photo Left Side.    CLICK HERE FOR PHOTO ANG DRILL PRESS_model Z-5032-A_capacity throat to column 27½" - 350mm diameter_drilling capacity 1.2598” - 32mm_tapping capacity 0.787” - M20mm_4 spindle taper_spindle quill travel manually and power thru 6.29" -160mm_feed per revolution of spindle 0.3 - 0.2 - 0.1 ipm_12- spindle speed 85 thru 3120 rpm thu two speed ranges_spindle head tilts ± 55 degrees_spindle head travel adjust manually up - down on rack 5¼" - 133.4mm_height under spindle nose to table 25.59" - 630mm_ height under spindle nose to base 47.24” - 1200mm_T-slotted table wet type_table working surface19⅝" LR x 17¾" FB - 500 x 400mm_table tilts ± 55 degrees_table rotates180 degrees_table adjustment up-down by hand crank thru 15" - 381mm_equipped with round column_tapping fuction_tool setting and dismounting button_coolant pump and tank_work light_point of operation drill guard_operator controls start stop buttons_emergency stop buttons_ spindle direction switch_coolant on - off_work light on-off_motor drive 1-1.5 kw 2 hp wired 220 volts 3 phase_dimensions: 20” LR x 36” FB x 83” Ht_Approx. Wt 1150 lbs_Serial Number K03066_condition NEW_Photo Front view Spindle Head Photo Front view Spindle Head.
CLICK HERE FOR PHOTO ANG DRILL PRESS_model Z-5032-A_capacity throat to column 27½" - 350mm diameter_drilling capacity 1.2598” - 32mm_tapping capacity 0.787” - M20mm_4 spindle taper_spindle quill travel manually and power thru 6.29" -160mm_feed per revolution of spindle 0.3 - 0.2 - 0.1 ipm_12- spindle speed 85 thru 3120 rpm thu two speed ranges_spindle head tilts ± 55 degrees_spindle head travel adjust manually up - down on rack 5¼" - 133.4mm_height under spindle nose to table 25.59" - 630mm_ height under spindle nose to base 47.24” - 1200mm_T-slotted table wet type_table working surface19⅝" LR x 17¾" FB - 500 x 400mm_table tilts ± 55 degrees_table rotates180 degrees_table adjustment up-down by hand crank thru 15" - 381mm_equipped with round column_tapping fuction_tool setting and dismounting button_coolant pump and tank_work light_point of operation drill guard_operator controls start stop buttons_emergency stop buttons_ spindle direction switch_coolant on - off_work light on-off_motor drive 1-1.5 kw 2 hp wired 220 volts 3 phase_dimensions: 20” LR x 36” FB x 83” Ht_Approx. Wt 1150 lbs_Serial Number K03066_condition NEW_Photo Left Side Spindle Head Rise & Fall_Electric Controls and Work Light Photo Left Side Spindle Head Rise & Fall, Electric Controls.
CLICK HERE FOR PHOTO ANG DRILL PRESS_model Z-5032-A_capacity throat to column 27½" - 350mm diameter_drilling capacity 1.2598” - 32mm_tapping capacity 0.787” - M20mm_4 spindle taper_spindle quill travel manually and power thru 6.29" -160mm_feed per revolution of spindle 0.3 - 0.2 - 0.1 ipm_12- spindle speed 85 thru 3120 rpm thu two speed ranges_spindle head tilts ± 55 degrees_spindle head travel adjust manually up - down on rack 5¼" - 133.4mm_height under spindle nose to table 25.59" - 630mm_ height under spindle nose to base 47.24” - 1200mm_T-slotted table wet type_table working surface19⅝" LR x 17¾" FB - 500 x 400mm_table tilts ± 55 degrees_table rotates180 degrees_table adjustment up-down by hand crank thru 15" - 381mm_equipped with round column_tapping fuction_tool setting and dismounting button_coolant pump and tank_work light_point of operation drill guard_operator controls start stop buttons_emergency stop buttons_ spindle direction switch_coolant on - off_work light on-off_motor drive 1-1.5 kw 2 hp wired 220 volts 3 phase_dimensions: 20” LR x 36” FB x 83” Ht_Approx. Wt 1150 lbs_Serial Number K03066_condition NEW_Photo Close Up Table Rise Fall & Tilt and Coolant Pump Left Side view Photo Close Up Table Rise Fall & Tilt and Coolant Pump Left Side view.
CLICK HERE FOR PHOTO ANG DRILL PRESS_model Z-5032-A_capacity throat to column 27½" - 350mm diameter_drilling capacity 1.2598” - 32mm_tapping capacity 0.787” - M20mm_4 spindle taper_spindle quill travel manually and power thru 6.29" -160mm_feed per revolution of spindle 0.3 - 0.2 - 0.1 ipm_12- spindle speed 85 thru 3120 rpm thu two speed ranges_spindle head tilts ± 55 degrees_spindle head travel adjust manually up - down on rack 5¼" - 133.4mm_height under spindle nose to table 25.59" - 630mm_ height under spindle nose to base 47.24” - 1200mm_T-slotted table wet type_table working surface19⅝" LR x 17¾" FB - 500 x 400mm_table tilts ± 55 degrees_table rotates180 degrees_table adjustment up-down by hand crank thru 15" - 381mm_equipped with round column_tapping fuction_tool setting and dismounting button_coolant pump and tank_work light_point of operation drill guard_operator controls start stop buttons_emergency stop buttons_ spindle direction switch_coolant on - off_work light on-off_motor drive 1-1.5 kw 2 hp wired 220 volts 3 phase_dimensions: 20” LR x 36” FB x 83” Ht_Approx. Wt 1150 lbs_Serial Number K03066_condition NEW_Photo Close Up Table Right Side view. Photo Close Up Table Right Side view.



30" CLEERMAN SINGLE SPINDLE DRILL PRESS
Box Column
Spindle Taper 4MT
(9) Spindle Speeds 50 thru 1,000 rpm
Quill Travel, Power Down Feed
Table 17⅞" X 27⅞"
2-Axis Table  Travel X - Y Axis  hand feed
Table Knee Adjustment Up and Down thru 14"
Main Drive 7½ hp
Equipped with: Coolant Pump
Inventory Reference D4810-10066


 

DRILLS: MULTIPLE SPINDLES    D4803-


MULTIPLE SPINDLE DRILLING HEAD

US two ADJUSTABLE SPINDLE
Spindle Taper 1MT
Spindle Center Adjust 1¼" thru 6¾"
Drilling Capacity ⅜"
Inventory Reference D3700-3868  CLICK HERE FOR QUOTATION U.S multiple spindle drilling head_two 1mt adjustable spindles_drill capacity 0.375 inch_spindle adjust 1.250 inch thru 6.75 inch centers_Serial Number 15690


DRILLS: TURRET   D6402-

BURGMASTER TURRET DRILL    Model  1-D
DRILL CAPACITY 1/2"
TAP CAPACITY 5/8"
THROAT DEPTH 8½"
6- TURRET STATIONS
SPINDLES:   (Six)
2-SPINDLE SPEEDS RANGES:  275 thru 4010 rpm
TABLE Working Surface, 2" F-B x 17" L-R
EQUIPPED WITH
   3- Drill Chucks: Capacity 5/64" thru 1/2"
   1-Procunier Tapping Head 1/2" Capacity with 6 collets
   2-Procunier Tapping Heads 1/4" Capacity with 5 collets
   Drill Mounted on Cabinet with two 10" wide extensions.
  Coolant Pump and Tank
Inventory Ref. D6402-9754   CLICK HERE FOR QUOTATION burgmaster turret drill press_model 1-D_capacity drill 0.50 inch_drill station 6_travel down 6 inch_table 12 inch x 17 inch_spindle speeds 275-4010 rpm_3-drill chucks_3- tapping head_Serial Number 5177
CLICK HERE FOR PHOTO burgmaster turret drill press_model 1-D_capacity drill 0.50 inch_drill station 6_travel down 6 inch_table 12 inch x 17 inch_spindle speeds 275 - 4010 rpm_3-drill chucks_3- tapping head_Serial Number 5177 Photo Over view.         CLICK HERE FOR PHOTO burgmaster turret drill press_model 1-D_capacity drill 0.50 inch_drill station 6_travel down 6 inch_table 12 inch x 17 inch_spindle speeds 275 - 4010 rpm_3-drill chucks_3- tapping head_Serial Number 5177_Close up turret Photo Close-up Turret with Chucks & Tapping Heads.



BURGMASTER HOUDAILE TURRET DRILL   Model 2-C
DRILL CAPACITY 3/4"
TAP CAPACITY 3/4" NF
THROAT DEPTH 11½"
TURRET: Number of Stations SIX
TURRET TRAVEL 8"
SPINDLE SPEEDS: 225 thru 3000 rpm.
WET TABLE: 18" x 26"
MAXIMUM HEIGHT UNDER SPINDLE 24"
MOTOR DRIVES: : 2-speed 2 H.P.
EQUIPPED WITH:
   5- Drill Chucks, keyed: Capacity  thru 1/2"
   1- Drill Chucks, non-keyed: 3/16" thru 1/2"
   1-Taping Head Capacity 1/2"
   Coolant Pump & Tank
UNIT MOUNTED ON CABINET
Inventory Ref. D6402-9858   CLICK HERE FOR QUOTATION burgmaster houdaile turret drill press_model 2-C_cap drill or tap 0.75 inch_6 stations_travel down 8 inch_table 18 inch x 26 inch_spindle speeds 225 - 3000 rpm_5-drill chucks_1- tapping head_Serial Number 238383  CLICK HERE FOR PHOTO burgmaster houdaile turret drill press_model 2-C_cap drill or tap 0.75 inch_6 stations_travel down 8 inch_table 18 inch x 26 inch_spindle speeds 225 - 3000 rpm_5-drill chucks_1- tapping head_Serial Number 238383 Photo Over view.



COMBINATION Drill, Lathe, Sander & Table Saw 

 

 

 

 

ELECTRICAL DISCHARGE MACHINES Ref. E2425-  
& Electro Arc
METAL DISINTEGRATOR Ref. D2827-

ELECTO ARC METAL DISINTEGRATOR
Model 1S
CAPACITY:
KVA 10
AMPS 13
TABLE SIZE  30" F-B x 39½" L-R
DISINTEGRATOR HEAD: Type Q
    Rotates Left and Right of vertical 90°.
    Head distance from column:  Minimum 10",    Maximum 36⅜"
    Head Vertical Travel by adjustment screw 9"
    Head travels on double barrel arms (Crossarms) 26⅜"
CROSSARM ADJUSTMENT: by adjustment screw 12"
COLUMN 50"
DISCHARGE HEAD Maximum height above table 34"
Inventory Reference D2875-9856 CLICK HERE FOR QUOTATION ELECTRO ARC METAL DISINTEGRATOR_model 1S_CAPACITY KVA 10_amps 13_voltage 440_table 5 T-slots_actual size inch fb x 39½ inch lr_ 5 T-slotted table 23½ inch x 34½ inch_disintegrator head type Q_model 2DV_rotates left and right of vertical 90°_head distance from column minimum 10 inch_maximum 36½ inch_head vertical travel by adjustment screw 8¾ inch_discharges head maximum height above table is 34" and movement adjustment by screw_arm rotates on column 360º_12 inch crossarm adjustment by adjustment screw_column height 50 inch_controls master on-off switch_power adjustment dial 1 thru 8_equipped with_1- coolant pump and tank_unit mounted on casters_Mfg 1998_ Serial Number 1253
CLICK HERE FOR PHOTO ELECTRO ARC METAL DISINTEGRATOR_model 1S_CAPACITY KVA 10_amps 13_voltage 440_table 5 T-slots_actual size inch fb x 39½ inch lr_ 5 T-slotted table 23½ inch x 34½ inch_disintegrator head type Q_model 2DV_rotates left and right of vertical 90°_head distance from column minimum 10 inch_maximum 36½ inch_head vertical travel by adjustment screw 8¾ inch_discharges head maximum height above table is 34" and movement adjustment by screw_arm rotates on column 360º_12 inch crossarm adjustment by adjustment screw_column height 50 inch_controls master on-off switch_power adjustment dial 1 thru 8_equipped with_1- coolant pump and tank_unit mounted on casters_Mfg 1998_ Serial Number 1253_Over-all view Photo Over-all view.       CLICK HERE FOR PHOTO ELECTRO ARC METAL DISINTEGRATOR_model 1S_CAPACITY KVA 10_amps 13_voltage 440_table 5 T-slots_actual size inch fb x 39½ inch lr_ 5 T-slotted table 23½ inch x 34½ inch_disintegrator head type Q_model 2DV_rotates left and right of vertical 90°_head distance from column minimum 10 inch_maximum 36½ inch_head vertical travel by adjustment screw 8¾ inch_discharges head maximum height above table is 34" and movement adjustment by screw_arm rotates on column 360º_12 inch crossarm adjustment by adjustment screw_column height 50 inch_controls master on-off switch_power adjustment dial 1 thru 8_equipped with_1- coolant pump and tank_unit mounted on casters_Mfg 1998_ Serial Number 1253_Close-up Disintegrator Head Photo Close-up Disintegrator Head.
 

" Many more drills in stock "
*PLEASE REQUEST  INFORMATION*

Call us at:  1-213-6272847,     FAX:  1-213-627-2499
or
E-Mail:   sales@centurymachinery.com

" THANK YOU for taking the time to visit our web site "