"USE SCROLL BAR to view Hones and Lappers Machines"►


            If you require a Quote Sheet PLEASE  send  us yourrequirements:
CENTURY logo
1937 South Santa Fe Avenue
Los Angeles, California 90021

Link back to Home Page►
www.centurymachinery.com

Email: sales@centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499

Serving Industry for 84 years


 

HONE, HORIZONTAL  H5975-

SUNNEN HORIZONTAL HONE
Model MBB-1290
CAPACITY:
Bore diameter range 1/8" - 2⅝"
Honing Length, Maximum 1/8"     Bore is 1⅞"
Honing Length, Maximum 2⅝"     Bore is 18"
EQUIPPED WITH:
Stroke Feed-up by Micrometer Dial.   Cutting Pressure Control Dial.
Foot Pedal start and stops the mandrel rotation, and automatically
      advances the stone as pre-set by the micrometer dial, and under
      the pre-selected cutting pressure. 
1-Mandrel Chuck.    1- Adapter.    1-Honing Mandrel.
MOTOR DRIVES: 1/2 Hp. 115 volts, 1-phase
Inventory Ref. H5975-9753 
sunnen horizontal hone_model MBB-1290_capacity diameter 0.125 inch thru 2.625 inch_ honing length 0.125 inch - bore 1.875 inch_honing length 2.625 - bore 18 inch_4- speeds_0.50 hp_115 volt


 

LAPPING MACHINES   L0754

Sorry we are out of stock, but Call Us we do have a data base of customers who just might have what you are looking for.




 

CENTER LAPPING GRINDERS   LO762-

EXCELL-O CENTER LAPPING MACHINE
Model 74
CAPACITY
   Work Diameter 10" x 31" Centers
Lapping Speeds  665, 1280,2300,4300 rpm.
Lapping Spindle Stroke 1"
EQUIPPED WITH:
   1-Cone Center.
   Stone Dresser with
(1) Diamond Nib

MOTOR DRIVE: 1/2 hp. 220 volts,
Inventory Reference L0762-10329  
excell-O center lapping machine, model 74, capacity 10.5 inch work diameter - swing x 31 inch centers, lapping spindle speeds 665,1280,2300,4300 rpm, stone dresser, with tail stock with Center, motor 0.50 hp 220 v, Serial Number 836



LARGE WORK CENTER
                                   

EXCELL-O CENTER LAPPING MACHINE
Model 175
CAPACITY
   Work Diameter 10" x 60" Centers
Variable Lapping Speeds thru 4300 rpm.
Lapping Spindle Stroke 1"
EQUIPPED WITH:
   Large selection of Center. From small to Large diameter Cone
   Large selection Grinding Stones (to match grinding Centers)

Leeson Vari Drive Motor & Controller 1/2 hp. 115 volts, Single Phase
Inventory Reference L0762-10384
EXCELL-O CENTER LAPPING MACHINE Model 175. CAPACITY work diameter 10" swing x 60" centers, Variable Lapping Speeds thru 4300 rpm, Lapping Spindle Stroke 1", Leeson Vari Drive Motor & Controller 1/2 hp. 115 volts, Single Phase, EQUIPPED WITH Large selection of Center. From small to Large diameter Cone, Large selection Grinding Stones (to match grinding Centers), Stone Dresser with Diamond Nib, Serial Number1750152   williams universal die filer, model F3, table 4-directions 25 degrees tilting table,table diameter 17"  with 10" rise and fall, variable filer stroke, Serial Number 15998



EXCELL-O CENTER LAPPING MACHINE
Model 175
CAPACITY
   Work Diameter 10" x 60" Centers
Lapping Speeds 665, 1280, 2300, 4500 rpm.
Lapping Spindle Stroke 1"
EQUIPPED WITH:
   Large selection of Center. From small to Large diameter Cone
   Large selection Grinding Stones
   Stone Dresser with
(1) Diamond Nib

Motor Drive 1/2 hp. 220 volts, Three Phase
Inventory Reference L0762-10459
EXCELL-O CENTER LAPPING MACHINE Model 175. CAPACITY work diameter 10" swing x 60" centers, 4-Lapping Speeds 665 thru 4500 rpm, Lapping Spindle Stroke 1", Drive 1/2 hp. EQUIPPED WITH Selection of Center & Grinding Stones,  Stone Angle Dresser with Diamond Nib, Serial Number 1750150


Please 
CALL 1-213-627-2847
             
FAX:  1-213-627-2499 or
              
Email: sales@centurymachinery.com

 

" THANK YOU for taking the time to visit our site. "