IRONWORKERS

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, CATEGORIES ARE IN ALPHABETICAL ORDER.

*IRONWORKERS UNIVERSAL, Flywheel Driven*
*IRONWORKERS UNIVERSAL,  Hydraulic Driven*


If you require a Quote Sheet PLEASE  send  us your requirements:
CENTURY MACHINERY COMPANY INC.
 1937 South Santa Fe Avenue
Los Angeles, California 90021

 Link back to Home Page►  www.centurymachinery.com
Email  sales@centurymachinery.com
 Telephone 1-213-627-2847
Fax 1-213-627-2499



 

IRONWORKER UNIVERSAL, Flywheel Driven

50 Ton MUBEA  IRONWORKER,  Model KBL
Size 48-4
Shear: Flat 7½" 5/16"  Round Bar 1⅜"    Square 1¼"
Angle 4" x 4" x 7/16"
12⅝" Throat on Punch End
Equipped with  Coper - Notcher  - Punch and Shear
 Inventory Reference P8915-9740




110 Ton BUFFALO  IRONWORKER,  Model 2½    Manufactured 1984
Angle 6" x 6" x 1/2"
20" Throat on Punch End
Equipped with  Coper     Notcher   Punch and Shear
    Air Logic Control            Inventory Reference P8915-16363  CLICK HERE FOR QUOTATION buffalo universal ironworker_ size 2.5_ punch 120 tons_ punch diameter 1.875 inch thru 0.875 inch_ shear 0.875 inch x 6 inch_ coper 4 inch x 4 inch x 0.50 inch_ notch 3 inch x 3 inch x 0.875 inch_ mfg. 1983.pdf  CLICK HERE FOR PHOTO buffalo universal ironworker_ size 2.5_ punch 120 tons_ punch diameter 1.875 inch thru 0.875 inch_ shear 0.875 inch x 6 inch_ coper 4 inch x 4 inch x 0.50 inch_ notch 3 inch x 3 inch x 0.875 inch_ mfg. 1983
THIS UNIT JUST SOLD.  WE HAVE ANOTHER UNIT COMING IN


◄ USE SCROLL BAR FOR HYDRAULIC DRIVEN IRONWORKER
▼  ▼

 

IRONWORKER UNIVERSAL, Hydraulic Driven

HILL ACME UNIVERSAL HYDRAULIC IRONWORKER    Model 4
Capacity Tons 58
 Angle 4" x 4" x 1/2"
 Punching Capacity: Max. Diameter thru Thickness1-1/16" thru ⅝"
      Diameter thru Max. Thickness 7/8" thru 3/4"
      Throat Depth 20"
Shearing Capacity:
Angles 4" x 4" x ½",   Angles at 45º 3" x 3" x 5/16"
Blade Length 12"
      Flat 5/8" x 7",   1/2" x 8" ,  3/8" x 12"
      Round 1¾",    Square 1⅛",   
      Tees 3" x 3" x ⅜"
Square Notching: 2¾" x 2¾"  x 3/8" deep
     Beam & Channels 4" to 7"
Equipped with: Electric Foot Trips
  12- Extra Punch Sets
  Motor Drive to Hydraulic Pump 7½  hp.
Inventory Reference P8915-9757 CLICK HERE FOR QUOTATION hill acme universal hydraulic ironworker_model 4_capacity 4 inch x 4 inch x 0.50 inch angle_58 tons_punch_shear_bar cutter_square notcher_throat on punch end 20 inch_Serial 539254


 

FOR OTHER CUTTING NEEDS: Please
Call  1-213-627-2847
Fax  1-213-627-2499
E-Mail us at  sales@centurymachinery.com

" THANK YOU for taking the time to visit our web site "