MILLERS, HORIZONTAL   "All Type"

 Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, CATEGORIES ARE IN ALPHABETICAL ORDER. ▬▬▬▬▬▬►

*JIG MILLS*
*MILL: Rubber / Plastic*
*MILLERS, HORIZONTAL: Plain Type*
*MILLERS, HORIZONTAL: Universal Type*
*MILLERS, PRODUCTION: Duplex*
*MILLERS, PRODUCTION: Simplex*
*TOOLING & ACCESSORIES*

SPECIAL 78 year in business discounted price on all items listed below "CALL".

If you require a Quote Sheet PLEASE  send  us your requirements:
CENTURY MACHINERY COMPANY INC.
1937 South Santa Fe Avenue
Los Angeles, California 90021

Email sales@centurymachinery.com
Website www.centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499
 

JIG MILLS   J5503-

SPECIAL 77 year in business discounted price.

3H-72  DEVLIEG JIG MILLER   Spiramatic
Spindle Diameter 3"
Vertical Height Spindle Up 48"
Spindle Speeds 25 thru1,200 rpm
Table Size  30" x 72"
Dual Feed Box
Equipped with: Diatrol 1 Control
Inventory Reference J5503-7179 CLICK HERE FOR QUOTATION deVlieg 3H-72 horizontal jig mill_4 inch spindle_spindle taper 40 mt_vertical movement 48 inch_auto positioning_side controls_diatrol_table size 35 inch x 72 inch_ power draw bar_Serial Number 8544
CLICK HERE FOR PHOTO devlieg spiramatic jig mill_size 3H-72_spindle diameter 3 inch_table 35 inch x 72 inch_spindle 25 - 1200 rpm_spindle vertical movement 48 inch_diatrol control_auto positioning_power draw bar_Serial Number 8544_Front view from the right Photo Front view from the right.    CLICK HERE FOR PHOTO devlieg spiramatic jig mill_size 3H-72_spindle diameter 3 inch_table 35 inch x 72 inch_spindle 25 - 1200 rpm_spindle vertical movement 48 inch_diatrol control_auto positioning_power draw bar_Serial Number 8544_Front view from the left Photo Front view from the left.    CLICK HERE FOR PHOTO devlieg spiramatic jig mill_size 3H-72_spindle diameter 3 inch_table 35 inch x 72 inch_spindle 25 - 1200 rpm_spindle vertical movement 48 inch_diatrol control_auto positioning_power draw bar_Serial Number 8544_Controls on Spindle Housing & Table Controls. Photo Controls on Spindle Housing & Table Controls.
CLICK HERE FOR PHOTO devlieg spiramatic jig mill_size 3H-72_spindle diameter 3 inch_table 35 inch x 72 inch_spindle 25 - 1200 rpm_spindle vertical movement 48 inch_diatrol control_auto positioning_power draw bar_Serial Number 8544_Bed Way front section on the left end. Photo Bed Way front section on the left end.      CLICK HERE FOR PHOTO devlieg spiramatic jig mill_size 3H-72_spindle diameter 3 inch_table 35 inch x 72 inch_spindle 25 - 1200 rpm_spindle vertical movement 48 inch_diatrol control_auto positioning_power draw bar_Serial Number 8544_Bed Ways rear section on the left end. Photo Bed Ways rear section on the left end.
CLICK HERE FOR PHOTO devlieg spiramatic jig mill_size 3H-72_spindle diameter 3 inch_table 35 inch x 72 inch_spindle 25 - 1200 rpm_spindle vertical movement 48 inch_diatrol control_auto positioning_power draw bar_Serial Number 8544_Bed Ways on the right end. Photo Bed Ways on the right end.     CLICK HERE FOR PHOTO devlieg spiramatic jig mill_size 3H-72_spindle diameter 3 inch_table 35 inch x 72 inch_spindle 25 - 1200 rpm_spindle vertical movement 48 inch_diatrol control_auto positioning_power draw bar_Serial Number 8544_Close-up Bed Way on the right end. Photo Close-up Bed Way on the right end.
CLICK HERE FOR PHOTO devlieg spiramatic jig mill_size 3H-72_spindle diameter 3 inch_table 35 inch x 72 inch_spindle 25 - 1200 rpm_spindle vertical movement 48 inch_diatrol control_auto positioning_power draw bar_Serial Number 8544_Spindle Housing Vertical Bed Ways. Photo Spindle Housing Vertical Bed Ways.   CLICK HERE FOR PHOTO devlieg spiramatic jig mill_size 3H-72_spindle diameter 3 inch_table 35 inch x 72 inch_spindle 25 - 1200 rpm_spindle vertical movement 48 inch_diatrol control_auto positioning_power draw bar_Serial Number 8544_Close-up Spindle Housing Vertical Bed Way. Photo Close-up Spindle Housing Vertical Bed Way.




 

MILLS, RUBBER / PLASTIC    M3098-









 

MILLERS, HORIZONTAL: Plain Type     M1974-

 
HIGH SPEED MILL
▼▼                   ▼▼
13" x 64" KEARNEY and TRECKER Plain HORIZONTAL MILLER  Size 3HS
High Speed Spindle
Spindle Taper 50 MT
Spindle Speed 3,500 and 7,000 rpm
3-Axis Feed with Rapid Feed
    Table with Power Feed for: Longitudinally and Cross.
    Table knee power up and down vertically.
Dual Drive 30/15 hp
Inventory Reference M1974-5275  CLICK HERE FOR QUOTATION kearney and trecker plain horizontal high spindle speed milling machine_model 3-HS_two spindle speeds 3500 and 7000 rpm_table size 12.6250 inch x 65 inch_table longitudinal travel 38 inch_cross travel 12.5 inch_knee vertical travel 12 inch_spindle drive motor 15 and 30 hp_cycles 120 and 60_Serial Number 6-6617



13½" x 56" KEARNEY and TRECKER Universal HORIZONTAL MILLER  Size 2CK
Spindle Taper 50 MT
Spindle Speed 15 thru1,500 rpm
3-Axis Feed with Rapid Feed
    Table with Power Feed for: Longitudinally and Cross
    Table knee power up and down vertically
Motor Drive 10 hp
Equipped with Programmable DRO.   Coolant Pump
    (1) Mill Arbor and Miscellaneous Tooling
Inventory Reference M2860-7224 CLICK HERE FOR QUOTATION kearney and trecker 2CK universal horizontal milling machine_table size 13.5 inch x 56 inch_table longitudinal travel 28 inch_cross travel 10 inch_table knee vertical travel 17 inch_spindle speed 15 - 1500 rpm_spindle taper 50 mt_3-axis power feed_drive motor 15 hp_equipped with milling arbor - arbor support - coolant pump_Rebuilt 1990



16" x 68" CINCINNATI  MILACRON Plain HORIZONTAL MILLER  Size 315-16
         Equipped with Power-Overarm with Universal Milling Head.
  This milling machine has been  SOLD,   PLEASE View photo's, for our finish product.
CLICK HERE FOR PHOTO cincinnati milacron plain horizontal milling machine_model 315-16_series E_table size 16.25 inch x 68.5 inch_ 3 axis power feed_with power over arm all angle head_two photos 2-photo's within




17" x 80" KEARNEY and TRECKER Plain HORIZONTAL MILLER  Size 420TF-17
Wide Knee.    Twin Elevation Screws
Spindle Taper  50 MT
HORIZONTAL SPINDLE Speeds 15 thru 1500 rpm
POWER OVER-ARM with Vertical Spindle 100 thru 1600 rpm
       Drive motor 5 hp.
3-Axis Feed with Rapid Feed
    Table with Power Feed for: Longitudinally and Cross.
    Table Knee power up and down vertically.
Horizontal Spindle Motor Drive 20 hp
Equipped with:
    Operator Side Controls.
    Mono Lever and Automatic Table Control.
    Table with positive backlash control.
    Power-Over Arm All Angle Vertical Head.
    Coolant Pump   (1) Mill Arbor    (1) Arbor Support
Inventory Reference M1974-10058  CLICK HERE FOR QUOTATION kearney and trecker plain horizontal miller with power over-arm_size 420TF-17_wide knee_twin elevation screws_table 17 inch x 80 inch table longitudinal travel 42 inch_table cross travel 14 inch_knee vertical travel 18 inch_HORIZONTAL SPINDLE 50 taper_Speeds 15 thru 1500 rpm driven by 20 hp motor_POWER OVER-ARM with all angle vertical head_50 mt_spindle speeds 100 thru 1600 rpm_driven by 5 hp motor_3-axis feed with rapid feed _table with power feed for longitudinally and cross_table knee power up and down vertically_equipped with operator side controls_mono lever and automatic table control_table with positive backlash control_power-over arm with all angle vertical head_coolant pump_1- mill arbor_1 arbor support_serial number 56-77074



17" x 80" KEARNEY and TRECKER Plain HORIZONTAL MILLER  Size 415TF-17
Wide Knee.    Twin Elevation Screws
Spindle Taper  50 MT
Horizontal Spindle Speeds 15 thru 1500 rpm
3-Axis Feed with Rapid Feed
    Table with Power Feed for: Longitudinally and Cross
    Table knee power up and down vertically
Mono Lever and Automatic Table Control
Operator Side Controls
Motor Drive 30 hp
Equipped with
    Coolant Pump   (1) Mill Arbor    (1) Arbor Support
Inventory Reference M1974-10056



19½" x 88" KEARNEY and TRECKER Plain HORIZONTAL MILLER  Size 430TF-17
Wide Knee.    Twin Elevation Screws
Spindle Taper  50 MT
Horizontal Spindle Speeds 15 thru 1,500 rpm
All Angle High Speed Vertical Head Spindle
3-Axis Feed with Rapid Feed
    Table with Power Feed for: Longitudinally and Cross
    Table knee power up and down vertically
Mono Lever and Automatic Table Control
Operator Side Controls
Motor Drive 30 hp
Equipped with: Automatic Parking Fixture for All Angle Vertical Head
    Coolant Pump   (1) Mill Arbor    (1) Arbor Support
Inventory Reference M1974-9440 CLICK HERE FOR QUOTATION kearney and trecker plain horizontal milling machine_size 430-TF-17_table 19.5 inch x 88 inch_table longitudinal travel 42 inch_cross feed 14 inch_knee vertical travel 18 inch_spindle speed 15 - 1500 rpm_spindle 50MT_wide knee twin elevation screws_3-axis power feed with rapid feed_all angle vertical milling head with power parking attachment_spindle drive 30 hp_equipped with mono lever automatic table feed control_sony 3 axis dro_coolant pump - milling arbor - arbor support_Serial Number 57-1002-01
CLICK HERE FOR PHOTO kearney and trecker plain horizontal milling machine_size 430-TF-17_table 19.5 inch x 88 inch_table longitudinal travel 42 inch_cross feed 14 inch_knee vertical travel 18 inch_spindle speed 15 - 1500 rpm_spindle 50MT_wide knee twin elevation screws_3-axis power feed with rapid feed_all angle vertical milling head with power parking attachment_spindle drive 30 hp_equipped with mono lever automatic table feed control_sony 3 axis dro_coolant pump - milling arbor - arbor support_Serial Number 57-1002-01_Photo left side to front view Photo Left Side to Front View       CLICK HERE FOR PHOTO kearney and trecker plain horizontal milling machine_size 430-TF-17_table 19.5 inch x 88 inch_table longitudinal travel 42 inch_cross feed 14 inch_knee vertical travel 18 inch_spindle speed 15 - 1500 rpm_spindle 50MT_wide knee twin elevation screws_3-axis power feed with rapid feed_all angle vertical milling head with power parking attachment_spindle drive 30 hp_equipped with mono lever automatic table feed control_sony 3 axis dro_coolant pump - milling arbor - arbor support_Serial Number 57-1002-01_Photo left side view Photo Left Side
CLICK HERE FOR PHOTO kearney and trecker plain horizontal milling machine_size 430-TF-17_table 19.5 inch x 88 inch_table longitudinal travel 42 inch_cross feed 14 inch_knee vertical travel 18 inch_spindle speed 15 - 1500 rpm_spindle 50MT_wide knee twin elevation screws_3-axis power feed with rapid feed_all angle vertical milling head with power parking attachment_spindle drive 30 hp_equipped with mono lever automatic table feed control_sony 3 axis dro_coolant pump - milling arbor - arbor support_Serial Number 57-1002-01_Photo Sony Digital Readout Photo Sony DRO          CLICK HERE FOR PHOTO kearney and trecker plain horizontal milling machine_size 430-TF-17_table 19.5 inch x 88 inch_table longitudinal travel 42 inch_cross feed 14 inch_knee vertical travel 18 inch_spindle speed 15 - 1500 rpm_spindle 50MT_wide knee twin elevation screws_3-axis power feed with rapid feed_all angle vertical milling head with power parking attachment_spindle drive 30 hp_equipped with mono lever automatic table feed control_sony 3 axis dro_coolant pump - milling arbor - arbor support_Serial Number 57-1002-01_Photo Close Up Bed Photo Bed




19½" x 96" KEARNEY and TRECKER Plain HORIZONTAL MILLER  Size 550TF-20
Wide Knee.    Twin Elevation Screws
Spindle Taper  50 MT
Horizontal Spindle Speeds 15 thru 1500 rpm
3-Axis Feed with Rapid Feed
    Table with Power Feed for: Longitudinally and Cross
    Table knee power up and down vertically
Mono Lever and Automatic Table Control
Operator Side Controls
Motor Drive 50 hp
Equipped with
    Coolant Pump   (1) Mill Arbor    (1) Arbor Support
Inventory Reference M1974-10062  CLICK HERE FOR QUOTATION kearney & trecker plain horizontal milling machine_model 550TF-20_wide knee-twin elevating screws_spindle taper 50 MT_24 spindle speeds 15 thru1500 rpm_table overall working area 19½" x 96" with 4-T slots_longitudinal table travel X-Axis 50"_cross slide travel Y-Axis) 16"_vertical knee travel Z-Axis 21"_32 table feeds longitudinal and cross 3/8" to 90 ipm_knee vertical feeds1/8" to 30 ipm_rapid traverse longitudinal and cross 150" ipm_rapid traverse knee-vertical 50" ipm_motor drives - horizontal spindle 50 hp_table and knee feed 5 hp_power draw bar 5 hp_coolant pump ¼ hp_CONTROLS-located on magnetic starter enclosure is-master start-stop buttons_right-left spindle switch_coolant on-off switch_draw bar In-out buttons_spindle-draw bar 2-position switch start button_EQUIPPED WITH-mono-lever and automatic cycle table control_positive backlash control with automatic release in rapid traverse and with lockout for manual operation_operators side controls for hand & power feed for table, saddle, knee and rapid traverse_1- power draw bar_1- arbor support_1- mill arbor_Serial Number 57-1001-13




19½" x 106" KEARNEY and TRECKER Plain HORIZONTAL MILLER  Size 630TF-20
Wide Knee.    Twin Elevation Screws
Spindle Taper  50 MT
Horizontal Spindle Speeds 15 thru 1500 rpm
3-Axis Feed with Rapid Feed
    Table with Power Feed for: Longitudinally and Cross
    Table knee power up and down vertically
Mono Lever and Automatic Table Control
Operator Side Controls
Motor Drive 30 hp
Equipped with
    Coolant Pump   (1) Mill Arbor    (1) Arbor Support
Inventory Reference M1974-10065


MILLERS, HORIZONTAL: Universal Type  M2680-

8" x 37½" VAN NORMAN  UNIVERSAL SWIVEL RAM HEAD  Size 12
  Spindle Head swivel from Horizontal Plain thru Vertical Plain
Spindle Taper 50 MT
Spindle Speeds 70 thru1,460 rpm
TABLE:
    Table with Power & Manual Feed for Longitudinally
    Table knee Manual up and down vertically
Motor Drive 1 hp
Equipped with:
    Over-Arm Support for Horizontal Arbor.
    1-Mill Arbor.   Miscellaneous Collets
Inventory Reference M2680-10070



9" x 46" KEARNEY & TRECKER  UNIVERSAL HORIZONTAL MILLER  Size  2HL
3-Axis Power Feed
Spindle Taper 50 MT
Spindle Speeds 35 thru1,400 rpm
3-Axis Feed with Rapid Feed
    Table with Power Feed for Longitudinally and Cross
    Table knee power up and down vertically
Motor Drive 3 hp
Equipped with: Mill Arbor and Miscellaneous Tooling
Inventory Reference M2680-7120  CLICK HERE FOR QUOTATION kearney and trecker universal horizontal milling machine_model 2HL_table size 9 inch x 46 inch_table angles 45 degrees foward and back_table longitudinal travel 28 inch_cross travel 10 inch_knee vertical travel 16 inch_spindle speed 35 thru1400 rpm_spindle taper 50 mt_3 axis power feed_equipped with milling arbor - arbor support - coolant pump_Serial Number 16-4850  CLICK HERE FOR PHOTO kearney and trecker universal horizontal milling machine_model 2HL_table size 9 inch x 46 inch_table angles 45 degrees foward and back_table longitudinal travel 28 inch_cross travel 10 inch_knee vertical travel 16 inch_spindle speed 35 thru1400 rpm_spindle taper 50 mt_3 axis power feed_equipped with milling arbor - arbor support - coolant pump_Serial Number 16-4850_Photo before being painted Photo
 This photo was taken prior to removing bare metal protective coating and cleaning & painting



13½" x 56" KEARNEY and TRECKER UNIVERSAL HORIZONTAL MILLER  Size 2CK
Spindle Taper 50 MT
Spindle Speed 15 thru1,500 rpm
3-Axis Feed with Rapid Feed
    Table with Power Feed for: Longitudinally and Cross
    Table knee power up and down vertically
Motor Drive 10 hp
Equipped with: Programmable DRO.   Coolant Pump
    (1) Mill Arbor and Miscellaneous Tooling
Inventory Reference M2860-7224 CLICK HERE FOR QUOTATION kearney and trecker 2CK universal horizontal milling machine_table size 13.5 inch x 56 inch_table longitudinal travel 28 inch_cross travel 10 inch_table knee vertical travel 17 inch_spindle speed 15 - 1500 rpm_spindle taper 50 mt_3-axis power feed_drive motor 15 hp_equipped with milling arbor - arbor support - coolant pump_Rebuilt 1990



13¼" x 63" LAGUN UNIVERSAL HORIZONTAL MILLER  SIZE FU3-LA
Spindle Taper 50 MT
Spindle Speed 28 thru1,400 rpm
3-Axis Feed with Rapid Feed
    Table with Power Feed for: Longitudinally and Cross
    Table knee power up and down vertically
    Table Angles Forward / Back 45 degrees
Motor Drive 10 hp
Equipped with    Coolant Pump
    (1) Mill Arbor and Miscellaneous Tooling
Inventory Reference M2680-9766  CLICK HERE FOR QUOTATION lagun universal horizontal milling machine_model FU3-LA_table 13.375 inch x 63 inch_table angle 45 degrees F-B_all angle head with parking attackment_10 hp_Serial Number 38233794
CLICK HERE FOR PHOTO lagun universal horizontal milling machine_model FU3-LA_table 13.375 inch x 63 inch_table angle 45 degrees F-B_all angle head with parking attackment_10 hp_Serial Number 38233794_Right side table not angled Photo Right Side Table NOT Angled.      CLICK HERE FOR PHOTO lagun universal horizontal milling machine_model FU3-LA_table 13.375 inch x 63 inch_table angle 45 degrees F-B_all angle head with parking attackment_10 hp_Serial Number 38233794_Table angled back Photo Right Side Table at ANGLE.
CLICK HERE FOR PHOTOS lagun universal horizontal milling machine_model FU3-LA_table 13.375 inch x 63 inch_table angle 45 degrees F-B_all angle head with parking attackment_10 hp_Serial Number 38233794_Left side with table angled Photo Left Side Table at ANGLE.      CLICK HERE FOR PHOTO lagun universal horizontal milling machine_model FU3-LA_table 13.375 inch x 63 inch_table angle 45 degrees F-B_all angle head with parking attackment_10 hp_Serial Number 38233794_All Angle Head  Photo All Angle Vertical Milling Head.
       CLICK HERE FOR PHOTO lagun universal horizontal milling machine_model FU3-LA_table 13.375 inch x 63 inch_table angle 45 degrees F-B_all angle head with parking attackment_10 hp_Serial Number 38233794_Close up Bed Photo Bed

 

IF YOU NEED ARBORS OR OTHER TOOLING?
"PLEASE SEND US YOUR REQUIREMENTS"

Call  1-213-627-2847
Fax: 1-213-627-2499
Email   www.centurymachinery.com







 

 MILLERS, PRODUCTION, Duplex  M2185-

 







 

MILLERS, PRODUCTION, Simplex     M2198-


8½" x 35" NICHOLS Simplex PRODUCTION MILLER,   Toolroom Model
Spindle Taper 40 MT
Five Spindle Speeds
Manual Rise & Fall on Spindle Head.
Manual Feed Table
    Overall Size 8½" W x 35" L    Working Surface 8½" W x 30" L
    Longitudinal Feed 19"
    Cross Feed 6¼"
Spindle Motor Drive 1½ hp.
Equipped with: (1) Mill Arbor   (1) Arbor Support
Inventory Reference M2198-9059 CLICK HERE FOR QUOTATION wh nichols simplex horizontal production milling machine_toolroom model_table size 8.5 inch x 35 inch_x-axis travel 19 inch_y-axis travel 6.025 inch_spindle manual rise fall_drive motor 1.5 hp_Serial Number 7-R-5061   CLICK HERE FOR PHOTO wh nichols simplex horizontal production milling machine_toolroom model_table 8.5 inch x 35 inch_table x-19 inch_y-6.025 inch_vert knee 13 inch_spindle 4.5 inch manual rise-fall_40mt_1.5 hp_Serial Number 7-R-5061_Front View  Photo Front view.   CLICK HERE FOR PHOTO wh nichols simplex horizontal production milling machine_toolroom model_table 8.5 inch x 35 inch_table x-19 inch_y-6.025 inch_vert knee 13 inch_spindle 4.5 inch manual rise-fall_40mt_1.5 hp_Serial Number 7-R-5061_Side view  Photo Side view.


NICHOLS VERTICAL MILLING HEAD
Spindle Taper 40 MT
Equipped with: 1- End Mill Tool Holder
Inventory Reference T3953-9877  CLICK HERE FOR QUOTATION nichols vertical milling head_taper spindle 40 MT_with one end mill holder_Serial 0350  CLICK HERE FOR PHOTO nichols vertical milling head_taper spindle 40 MT_with one end mill holder_Serial Number 0350 Photo
This head will fit onto the above Nichols Miller



24" x 84"  FITCHBURG  Simplex PRODUCTION MILLER   "Priced to Sell"
Spindle Taper 50MT
Table Working Surface 21¾” x 72”
Spindle  Motor Drive 15 hp     Table Feed 5 hp
Equipped with: (1) Mill Arbor   (1) Arbor Support
Inventory Reference  M2198-5494 CLICK HERE FOR QUOTATION fitchburg simplex production milling machine_table 24 inch x 84 inch_working surface 21.75 inch x 72 inch_spindle taper 50 mt_spindle drive 15 hp_5 hp table drive_ I.D. DPC10213BWSP  CLICK HERE FOR PHOTO fitchburg simplex production milling machine_table 24 inch x 84 inch_working surface 21.75 inch x 72 inch_spindle taper 50 mt_spindle drive 15 hp_5 hp table drive_ I.D. DPC10213BWSP Photo






TOOLING & ACCESSORIES 

*NEW* UNIVERSAL TILTING CHUCK
Chuck Diameter 4.3307"
Number of Jaws Three
Chuck Rotates 360° & Tilts thru 90°
WEBSITE PRICE $475.00
Inventory ReferenceT3953-4365  CLICK HERE FOR QUOTATION: NEW universal tilting rotary chuck_diameter chuck 4.3307 inch_3 adjustable jaws_chuck rotation 360 degrees_chuck tilts thru 90 degrees_overall height 3.5 inch_Serial Number 000497 _ Serial Number 000498  CLICK HERE FOR PHOTO: NEW universal tilting rotary chuck_diameter chuck 4.3307 inch_3 adjustable jaws_chuck rotation 360 degrees_chuck tilts thru 90 degrees_overall height 3.5 inch_Serial Number 000497 _ Serial Number 000498 Photo


DIVIDING HEADS:
▼
VAN NORMAN DIVIDING HEAD
Direction set in horizontal plain
Swing 10½"
Spindle thru hole1-1/6"
Base swivel 360°
with Collet Chuck
LIST PRICE $400.00 WEBSITE PRICE $289.95
OPTION TAILSTOCK $148.95
Inventory Reference T3953-9874 CLICK HERE FOR QUOTATION: van norman dividing head_horizontal direction_set height_10.5 inch swing_spindle thru hole 1.0625 inch_taper collet nose_Serial Number 2399  CLICK HERE FOR PHOTO: van norman dividing head_horizontal direction_set height_10.5 inch swing_spindle thru hole 1.0625 inch_taper collet nose_Serial Number 2399 Photo Spindle Collet.
CLICK HERE FOR PHOTO: van norman dividing head_horizontal direction_set height_10.5 inch swing_spindle thru hole 1.0625 inch_taper collet nose_Serial Number 2399 Photo Spindle right side view.   CLICK HERE FOR PHOTO: van norman dividing head_horizontal direction_set height_10.5 inch swing_spindle thru hole 1.0625 inch_taper collet nose_Serial Number 2399 Photo Spindle rear view.     CLICK HERE FOR PHOTO: van norman dividing head_horizontal direction_set height_10.5 inch swing_spindle thru hole 1.0625 inch_taper collet nose_Serial Number 2399_Down view Photo Down view.


BROWN and SHARPE DIVIDING HEAD
Swing 10"
Tilts 10° Below Horizontal & 5° Beyond Vertical
with 7" diameter Three Jaw Chuck
        Tail Stock with Height adjustment and pivot
        1- Dividing Plate
LIST PRICE $1,850.00 WEBSITE PRICE $789.00
Inventory Reference T3953-9111 CLICK HERE FOR QUOTATION: brown and sharpe dividing head_size 10 inch swing_with 7 inch three jaws chuck_thru hole in chuck 1.0625 inch_tilt 10 degrees below and 5 degrees beyond vertical_Serial Number 3939  CLICK HERE FOR PHOTO: brown and sharpe dividing head_size 10 inch swing_with 7 inch three jaws chuck_thru hole in chuck 1 inch_tilt 10 degrees below and 5 degrees beyond vertical_Serial Number 3939 Photo


 DIVIDING HEAD
Swing 12"
Tilts 10° Below Horizontal & 5° Beyond Vertical
with Chuck 6" diameter Three reversible top jaws.
1- Dividing Plate  and 1-Foot Stock
LIST PRICE $1,250.00  DISCOUNTED PRICE $689.00
Inventory Reference T3953-4367 CLICK HERE FOR QUOTATION: dividing head_chuck 6.25 inch 3-jaw_12 inch swing_tiltl 10 degrees below horizontal - 90 degree vertical_with tail stock_1.3125 inch hole_Chuck Serial Number 1010406000C   CLICK HERE FOR PHOTO: dividing head_chuck 6.25 inch 3-jaw_12 inch swing_tiltl 10 degrees below horizontal - 90 degree vertical_with tail stock_1.3125 inch hole_Chuck Serial Number 1010406000C Photo


 

MILLING HEADS All Angle & Vertical:
▼
NICHOLS VERTICAL MILLING HEAD
Spindle Taper 40 MT
Equipped with: 1- End Mill Tool Holder
Inventory Reference T3953-9877  CLICK HERE FOR QUOTATION nichols vertical milling head_taper spindle 40 MT_with one end mill holder_Serial Number 0350  CLICK HERE FOR PHOTO nichols vertical milling head_taper spindle 40 MT_with one end mill holder_Serial Number 0350 Photo


CINCINNATI VERTICAL MILLING HEAD
         For 2 Size Mill
FIXED QUILL
TAPER 50 MT
SWIVEL BASE: One (Graduated)
     Can be set to any angle through 360 degrees in a single vertical
             plane parallel to table travel. Or parallel to face of machine column.
EQUIPPED WITH:
        1-Draw Bar.  1- Drive Gear
Inventory Reference T3953-3865  CLICK HERE FOR QUOTATION cincinnati vertical milling head_size 2_fixed spindle_taper 2_single swivel joint_Serial Number AHR1P5


2- In-stock
KEARNEY & TRECKER UNIVERSAL VERTICAL MILLING HEAD
         For 2CH Mill
TAPER  50 MT
SWIVEL BASE: Two (Both graduated)
     At 90 degrees to each other.  Both can be set to any angle thru
           360 degrees to mill at a simple and compound angles.
EQUIPPED WITH:
     1-Drive Gear     1-Draw Bar
Inventory Reference T3953-3866  CLICK HERE FOR QUOTATION kearney and trecker universal milling head_for model 2CH_spindle taper 50 mt_2-swivel base graduated 90 degrees to each other both can be set to any angle thru 360 degrees_simple and compound angles_fits 2CH horizontal mill_Serial Number 9-4766-20-4769      T3953-3902  CLICK HERE FOR QUOTATION kearney and trecker universal milling head_for model 2CH_spindle taper 50 mt_2-swivel base graduated 90 degrees to each other both can be set to any angle thru 360 degrees_simple and compound angles_ fits 2CH mill_Serial Number 9-4766-20-4899


KEARNEY & TRECKER VERTICAL MILLING HEAD
            For 3 Size Mill
SPECIFICATIONS
FIXED QUILL
TAPER 50 MT
SWIVEL BASE: One (Graduated)
        Can be set to any angle through 360 degrees in a single vertical
             plane parallel to table travel. Or parallel to face of machine column.
EQUIPPED WITH:  1-Drive Gear.  1-Draw Bar
Inventory Reference T3953-6503 CLICK HERE FOR QUOTATION kearney and trecker vertical milling machine head_fits mill size 3_fixed quill_swivels 360 degrees_spindle taper 50mt_Serial Number 2-6091


KEARNEY & TRECKER VERTICAL MILLING HEAD
        For 4 Size Mill
SPECIFICATIONS:
FIXED QUILL
TAPER 50 MT
SWIVEL BASE: One (Graduated)
        Can be set to any angle through 360 degrees in a single vertical
             plane parallel to table travel. Or parallel to face of machine column.
WIDTH OF MOUNTING BASE SURFACE:
        Between V-clamp 14"
EQUIPPED WITH:
        1-Draw Bar.   1- Drive Gear
Inventory Reference T3953-6502 CLICK HERE FOR QUOTATION kearney and trecker vertical milling head_single swivel joint_spindle taper 50 MT_fits 4 size mill_base width 14 inch_Serial Number 8-6881


KEARNEY & TRECKER UNIVERSAL VERTICAL MILLING HEAD
       For 6 Mill
SPECIFICATIONS:
HEAVY DUTY
TAPER 50 MT
SWIVEL BASES: Two (Both graduated)
        At 90 degrees to each other.  Both can be set to any angle through
           360 degrees to mill at a simple and compound angles.
WIDTH OF MOUNTING SURFACE:
        Between V-Clamp 16½"
EQUIPPED WITH:  1-Drive Gear.   Draw Bar
Inventory Reference T3953-5493 CLICK HERE FOR QUOTATION kearney and trecker universal vertical milling head_taper spindle 50 MT_for number 5 mill_ Serial Number 6-5128




LARGE SELECTIONS: Arbors,  BORING HEADS,  ETC.



   IF YOU NEED ARBORS OR OTHER TOOLING?
We have large assortment of  !!!
"PLEASE SEND US YOUR REQUIREMENTS"

"PLEASE CONTACT US FOR QUOTATIONS"

Phone  1-213-627-2847,      Fax  1-213-627-2499 or
E-Mail sales@centurymachinery.com

" THANK YOU for taking the time to visit our web site "