VERTICAL MILLERS "ALL TYPE"
Link back to Home Page► www.centurymachinery.com
POINT and CLICK CATEGORIES or JUST SCROLL DOWN CATEGORIES ARE IN ALPHABETICAL ORDER. ▬▬▬▬▬▬►
*MACHINING CENTERS, All Types*
*MILLERS: COPY TRACER*
*MILLERS: VERTICAL, All Types*
(Ram Type, Combination Vert. & Horiz. Spindle, & Universal)
*PROFILERS: CNC 3 & 5 Axis: (Single & Multi Spindles)*
SPECIAL 78 year in business discounted price on all items listed below "CALL".
If you require a Quote Sheet PLEASE send us your requirements:
CENTURY MACHINERY COMPANY INC.
1937 South Santa Fe Avenue
Los Angeles, California 90021
Email sales@centurymachinery.com
Website www.centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499
GIDDINGS & LEWIS VERTICAL MACHINING CENTER
Model 10VS
SPINDLE TAPER 50
SPINDLE SPEEDS 40 Thru 4,000 rpm
THROAT DEPTH, CC Spindle to Column 32" Maximum. 18.11” Minimum
TABLE: Overall Size 32.88" W x 61.50" L. Working Surface 26" W x 54" L
TABLE TOP to SPINDLE NOSE: CLEAR HEIGHT 2.55" Min. Max. 34.50"
TRAVEL:
Longitudinal Table Travel (X-Axis) 48"
Cross Travel Table Carriage (Y-Axis) 24"
Vertical Spindle Head Stock Travel (Z-Axis) 31.50"
TOOL CHANGER Automatic: Capacity Tool Storage Module 40
SPINDLE MOTOR DRIVE: 15 H.P.
Inventory Reference M0185-9894 ![]()
Photo Front View.
Photo Controls and Right Side View.
Photo Left Side View with 40 Position Automatic Tool Changer.
Photo Close-up Carousel Tool Holder.
Photo Close-up Table.
Photo Close-up Operator Control Station.
Photo Close-up Hydraulic Pump.
Photo Close-up Coolant Pump and Tank.
This unit just taken out of service.
▲ MAKE REASONABLE OFFER
We are always looking for Late CNC Mill
Please send list of your Surplus Equipment
Call: 1-213-627-2847
Fax: 1-213-627-2499 or
E-Mail: sales@centurymachinery.com
MILLERS: VERTICAL, All Types
Ram Type, Combination Vertical & Horizontal Spindle & Universal M2824-
MILLING MACHINERS
ACCESSORY FOR MILLS
(1) DRILL CHUCK 1/8 - 5/8" Keyless with R-8 adapter, Inventory Reference T3953-9845 $125.00
*NEW* UNIVERSAL TILTING CHUCK
Chuck Diameter 4.3307"
Number of Jaws Three
Chuck Rotates 360° & Tilts thru 90°
WEBSITE PRICE $289.00
Inventory ReferenceT3953-4365
Photo
VAN NORMAN DIVIDING HEAD
Direction set in horizontal plain
Swing 10½"
Spindle thru hole1-1/6"
Base swivel 360°
with Collet Chuck
LIST PRICE $700.00 WEBSITE PRICE $289.95
OPTION TAILSTOCK $148.95
Inventory Reference T3953-9874
Photo Spindle Collet.
Photo Spindle right side view.
Photo Spindle rear view.
Photo Down view.
BROWN and SHARPE DIVIDING HEAD
Swing 10"
Tilts 10° Below Horizontal & 5° Beyond Vertical
with 7" diameter Three Jaw Chuck
Tail Stock with Height adjustment and pivot
1- Dividing Plate
LIST PRICE $1,850.00 WEBSITE PRICE $789.00
Inventory Reference T3953-9111
Photo
DIVIDING HEAD
Swing 12"
Tilts 10° Below Horizontal & 5° Beyond Vertical
with Chuck 6" diameter Three reversible top jaws.
1- Dividing Plate and 1-Foot Stock
LIST PRICE $1,250.00 DISCOUNTED PRICE $689.00
Inventory Reference T3953-4367
Photo
VERTICAL MILLING HEAD: Please go to Tooling Section or Horizontal Mill Section
"PLEASE CALL FOR OTHER MILLING MACHINE TOOLING"
8" x 37½" VAN NORMAN UNIVERSAL SWIVEL RAM HEAD Size 12
Spindle Head swivel from Vertical Plain thru Horizontal Plain
Spindle Taper 50 MT
Spindle Speeds 70 thru1,460 rpm
TABLE:
Table with Power & Manual Feed for Longitudinally
Table knee Manual up and down vertically
Motor Drive 1 hp
Equipped with:
Over-Arm Support for Horizontal Arbor.
1-Mill Arbor. Miscellaneous Collets
Inventory Reference M2680-10070
9" x 42" BRIDGEPORT VERTICAL MILLER
Spindle Speeds: 80 thru 2750 rpm
Spindle Quill Travel 6"
Spindle Quill Hand and Power Feed
Spindle Drive 1Hp.
Equipped with:
Power Feed Table.
Miscellaneous R-8 Collets.
Inventory Reference M2824-9505 ![]()
9" x 48" BRIDGEPORT VERTICAL MILLER, Series 1
Spindle Speeds: Infinitely Variable 60 thru 4200 rpm.
Spindle Quill Travel 6"
Spindle Quill Hand and Power Feed
Spindle Drive 2 Hp.
Equipped with: SLOTTING ATTACHMENT
Power Feed Table.
Miscellaneous R-8 Collets.
Inventory Reference M2824-9539 ![]()
Photo Front view.
Photo side view.
Photo close-up table.
9" x 48" BRIDGEPORT VERTICAL MILLER, Series 1
Spindle Speeds: Infinitely Variable 60 thru 4200 rpm.
Spindle Quill Travel 6"
Spindle Quill Hand and Power Feed
Spindle Drive 2 Hp.
Equipped with: SLOTTING ATTACHMENT
Power Feed Table.
Acu-Rite III 2-Axis DRO.
Power Collet Draw Bar. 14-Miscellaneous R-8 Collets.
Bijur Spray Mist Coolant System.
Power Way Lubricator.
Inventory Reference M2824-9997 ![]()
10" x 50" FAMCO VERTICAL MILLER, Model 120-3DM
with Bridgeport Milling Head
Spindle Speeds: Infinitely Variable 60 thru 4200 rpm
Spindle Quill Travel 6"
Spindle Quill Hand and Power Feed
Spindle Drive 2 Hp.
3-Axis Power Feed
Equipped with: Chrome Ways. Power Feed on Table, Spindle & Knee
Miscellaneous R-8 Collets,
Bijur Spray Mist Lubricator. Work Light.
Inventory Reference M2824-9512 ![]()
10½" x 42" TREE VERTICAL MILLER, Model 2UVR
Spindle Speeds: Infinitely Variable 60 thru 3000 rpm
Spindle Quill Travel 4"
Spindle Quill Hand and Power Feed
Spindle Drive 1½ Hp.
2-Axis Power Feed
Equipped with: Power Feed on Table and Spindle
Miscellaneous Collets, Trav-A Dials on Cross and Longitudinal Table.
Work Light
Inventory Reference M2824-9456
Photo
18" x 36" EKSTROM CARLSON High Speed VERTICAL MILLER, Model 540
"Not used since mill Rebuilt 2010"
Speeds100 thru 5000 rpm. Spindle Collet Capacity 1" diameter.
Spindle Quill Travel Down 7"
Spindle Ram Travel In and out thru 26"
Spindle Head Tilt Left /Right of 90 degrees.
Ram move in/out and rotates 360 degrees.
Table: Tilts Forward & Back 30º, Moves Longitudinally and Cross Travel.
Table Knee adjusts Up and Down thru 23"
Motor drive 5 hp.
Inventory Reference M2824-4032
Photo
SPECIAL WEBSITE DISCOUNTED PRICE $3,850.00
17" x 88" KEARNEY & TRECKER Vertical Miller, Size 315TF-17
Twin Knee Elevation Screws
Spindle Taper 50 MT
Spindle Speeds 15 thru 1500 rpm.
Power Feed Down on Spindle Housing thru 7"
3-Axis Feed with Rapid Feed:
Table with Power Feed for: 42" Longitudinally and 16" Cross.
Table knee power up and down vertically 16
Motor Drive 30 hp.
Equipped with: Power Draw Bar.
Mono Lever Table Control with Auto Cycle.
Inventory Reference M2824-10057
18" x 94" KEARNEY and TRECKER VERTICAL MILLER, Size 5H
Spindle Speeds 16 thru 1,300 rpm.
Spindle Taper 50 MT.
Power Feed Down on Spindle Quill.
3-Axis Feed with Rapid Feed:
Table with Power Feed for: 52" Longitudinally and 16" Cross.
Table knee power up and down vertically.
Drive Motor 25 hp. Excellent Condition.
Inventory Reference M2824-9513 ![]()
17" x 80" KEARNEY & TRECKER Vertical Miller, Size 430TF-17
Twin Knee Elevation Screws
Spindle Taper 50 MT
Spindle Speeds 15 thru 1500 rpm.
Power Feed Down on Spindle Housing thru 8"
3-Axis Feed with Rapid Feed:
Table with Power Feed for: 42" Longitudinally and 16" Cross.
Table knee power up and down vertically 16"
Motor Drive 30 hp.
Equipped with:
DRO 3-Axis
Power Draw Bar.
Mono Lever Table Control with Auto Cycle.
20" dia. Rotary Table with Power Take-Off.
Inventory Reference M2824-10060 ![]()
18" x 96" KEARNEY & TRECKER Vertical Miller, Size 525TF-18
Twin Knee Elevation Screws
Spindle Taper 50 MT
Spindle Speeds 13 thru 1300 rpm.
Power Feed Down on Spindle Housing.
3-Axis Feed with Rapid Feed:
Table with Power Feed for: 50" Longitudinally and 18" Cross.
Table knee power up and down vertically.
Motor Drive 25 hp.
Inventory Reference M2824-9825 ![]()
19½" x 96" KEARNEY & TRECKER Vertical Miller, Size 550TF-20
Twin Knee Elevation Screws
Spindle Taper 50 MT
Spindle Speeds 15 thru 1500 rpm.
Power Feed Down on Spindle Housing thru 8"
3-Axis Feed with Rapid Feed:
Table with Power Feed for: 50" Longitudinally and 18" Cross.
Table knee power up and down vertically 18"
Motor Drive 50 hp.
Equipped with: Power Draw Bar. DRO 3-Axis
Mono Lever Table Control with Auto Cycle.
Inventory Reference M2824-10059 ![]()
23" x 106" KEARNEY & TRECKER Vertical Miller, Size 650TF-20
Twin Knee Elevation Screws
Spindle Taper 50 MT
Spindle Speeds 15 thru 1500 rpm.
Power Feed Down on Spindle Housing thru 8"
3-Axis Feed with Rapid Feed:
Table with Power Feed for: 60" Longitudinally and 18" Cross.
Table knee power up and down vertically 18"
Motor Drive 50 hp.
Equipped with:
Sony 3 Axis DRO.
Power Draw Bar.
Mono Lever Table Control with Auto Cycle.
Inventory Reference M2824-10061 ![]()
PROFILERS, CNC 3 & 5 Axis:
(Single & Multi Spindles)
THREE AXIS
▼▼▼
3-Axis KOMO Vertical CNC ROUTER and DRILL, Model VR-805-Q, Year Mfg 1995
Moving Bed & Heads
Four (4) ROUTING SPINDLES each: 12½ Hp. 18,000 rpm.
Four (4) BORING & DRILL SPINDLES Piggyback
Spindle Head Spacing Adjustable 10" thru 24" centers.
WORK ENVELOPE 96" x 60" x 6"
Equipped with GE Fanuc OM Control.
VACUUM TABLE.
1-Sullair Vacuum Pump
Inventory Reference R8906-9221 ![]()
Photo Router.
Photo View of Routing & Drill Heads.
Photo Side View Center Adjustment for Spindle Centers.
Photo Close Up Routing Spindle & Piggyback Drill Head.
Photo Close up Piggyback Drill Head.
Photo Close up Right End Router Head & Piggyback Drill located on right side.
Photo GE Fanuc O-M Operator Control.
Photo Hand Control.
Photo Sullair Vacuum Pump.
Photo Vacuum Filter.
3-Axis KOMO Vertical CNC ROUTER and DRILL
Model VR-805-Q Year Mfg November 1990
Moving Bed and Heads
Four (4) ROUTING SPINDLES each 12½ Hp 18,000 rpm
Four (4) BORING & DRILL SPINDLES Piggyback
Spindle Head Spacing Adjustable 10" thru 24" centers
WORK ENVELOPE 96" x 60" x 6"
Equipped with GE Fanuc OM Control.
VACUUM TABLE. .
1-Ingersoll Rand Vacuum Pump
Inventory Reference R8906-9222
Photo
5- AXIS PROFILERS
5-Axis CINCINNATI MILACRON Vertical Honeycomb Profiler
Model 20V, Bed Type
Spindle Speed, Infinitely Variable 7,200 thru 24,000 rpm
Spindle Slide, Vertical Travel (Z-Axis) 24"
Spindle Head Rotates (B-Axis) Tilt -110 degrees to 10 degrees.
(C-Axis) Twist +/- 190 degrees
Spindle Carrier: Auto Tilt Type
WORK HEIGHT: Spindle Pivot point to Working Surface 5.75" Minimum.
Maximum 29.75"
TABLE SIZE 40" x 130"
Longitudinal Travel (X-Axis) 120". Transverse (Y-Axis) 42".
Equipped with:7Spindle Cooling: Glycol with Chiller.
Dust Collection System.
RS232 Port with 2nd Computer
Inventory Reference P8227-6917 ![]()
"Very little Use" *A MUST SEE*
Photo Machine w/ Dust Collector at extreme right.
Four Photos Router Head.
Photo's Exhaust Collection System.
Book photo ![]()
PLEASE CONTACT US FOR: QUOTES & PHOTO'S
Phone: 1-213-627-2847, Fax: 1-213-627-2499 or
E-Mail: sales@centurymachinery.com
"THANK YOU for taking the time to visit our web site"