PANTOGRAPHS, ENGRAVING MACHINES
& CARVING MACHINES MULTIPLE SPINDLES

Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, CATEGORIES ARE IN  DIMENSION ENGRAVING

*2 - DIMENSION PANTOGRAPH ENGRAVERS, Single Spindle*
*3 - DIMENSION PANTOGRAPH ENGRAVERS, Single Spindle*
*COPY CARVING MACHINES, Multiple Spindles*

SPECIAL 78 year in business discounted price on all items listed below "CALL".

If you require a Quote Sheet PLEASE  send  us your requirements:

CENTURY MACHINERY COMPANY INC.
 1937 South Santa Fe Avenue
Los Angeles, California 90021

Email: sales@centurymachinery.com
Website: www.centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499

  2 - DIMENSION PANTOGRAPH ENGRAVERS
Single Spindle

LARS PANTOGRAPH ENGRAVING MACHINE
Model P1-2
TWO DIMENSIONAL
CAPACITY:
Swing & engrave to center of a:
        Disc: Thick x Diameter 5" x 38"
        Drum: Height x Diameter 11" x 22"
RATIO:
     1:1 Full Size down to 40-1 are obtainable.
SPINDLE SPEEDS APPROXIMATE:  4700, thru18000, rpm
2- WORK TABLES: All Feeds by Hand
    Main Table, 4-T Slots, Size: 8" X 18"
    Ad on Top Table, 3-T Slots, Size 1 8” x 24”
COPY TABLE: Size 8⅞" x 23Ύ"
Equipped with 1-NEW Lars 9" diameter Index Table.
MOTOR DRIVE: 1/4 HP. 115 volts, 1 Phase*
Inventory Reference P0298-9731 CLICK HERE FOR QUOTATION lars 2- dimensional pantograph engraving machine_model P1-2l_8 spindle speeds 4700 thru 18000 rpm_table size 8 inch x 18 inch_drive 0.250 hp single phase_Serial Number 80F-75656   CLICK HERE FOR PHOTO lars 2-dimensional pantograph engraving machine_model P1-2_8 spindle speeds 4700 thru 18000 rpm_table size 8 inch x 18 inch_drive 0.250 hp single phase_Serial Number 80F-75656 Photo    CLICK HERE FOR PHOTO lars 2-dimensional pantograph engraving machine_model P1-2_8 spindle speeds 4700 thru 18000 rpm_table size 8 inch x 18 inch_drive 0.250 hp single phase_Serial Number 80F-75656 Photo      CLICK HERE FOR PHOTO lars pantograph engraving machine_model P1-2_two dimensional_8 spindle speeds 4700 thru 18000 rpm_table size 8 inch x 18 inch_drive 0.250 hp single phase_Serial Number 80F-75656_View bottom of both tables View of both work tables.

*NEW*  9" diameter LARS PRECISION INDEXING TABLE,  Four adjustable jaws
WEBSITE PRICE $389.00     Ref. T0120-4042  CLICK HERE FOR QUOTATION: index tables_Condition NEW_diameter 9 inch_number of adjustable jaws four_model X333  CLICK HERE FOR PHOTO: index tables_Condition NEW_diameter 9 inch_number of adjustable jaws four_model X333









  3 - DIMENSION PANTOGRAPH ENGRAVERS,
Single Spindle

FRIEDRICH DECKEL universal PANTOGRAPH ENGRAVING &
             DIE SINKING MACHINE     Model KF12      THREE DIMENSIONAL
CAPACITY:
CUTTER SPINDLES:  Collet 3/4" (Morse 2) (20mm)         Variable Spindle Speeds 60  thru 10000 rpm
    Stationary Work Table: clamping area 9.85" x 27.6"
    Stationary Copyholder Table: clamping area 16.9" x 23.6" with Manual & Power Elevation.
    Supplemental Worktable Top: 17.7" x 17.7"
    Drag Table: clamping area 15.75" x 15.75".
Equipped with:  1-Rough Milling Spindle Unit.  1-Finish Milling Spindle Unit.
        1-Fine Finishing Spindle Unit.   1-Angular Spindle Units with associated Angular Tracer Pin Holder.
        1-Pantograph System & Cutter Guide Mechanism.     1-Spindle Parallel Guiding Mechanism.
        1-Symmetrical Duplicating Attachment with Clamping Table Assembly.   1-Angular Stylus Holding Bracket.
        1-Auxiliary Table.   1-Drag Table Assembly.    1-Stationary Copyholder Table.
        1-Pattern Forming attachment with Bearing Arm for crankpin.     1-Optical Tracing Attachment.
        1-Immobilizing Bracket for Clamping the Cutter Spindle.     1-Enlarging  & Reducing Attachment.
        2-Handwheel Reduction Gearing.     1- Copy Holder Table for type face 4Ύ" x 17⅜"_25 Collets.
        Miscellaneous Cutter Extensions.     Miscellaneous Cutters.     Miscellaneous Tracing Stylus.
        Miscellaneous Wrenches.   Miscellaneous Drive Belts.   Work Light. 1-Tool Cabinet
MOTOR DRIVE: 0.9 - 1.1 kw
Inventory Reference P0298-10049  CLICK HERE FOR QUOTATION friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915
EQUIPPED WITH: almost every option available
CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Right Side view Photo Right Side.    CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Right Side view Photo Right Side.     CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Front to Right Side view Photo Front Table to Right Side view.    CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Copy Table to Right Side view Photo Copy Table to Right Side view.
CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Front view with Electric Control Photo Front view with Electric Control.    CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Tables Reduction Gearing & Elevation Drive Photo Close-up Tables Reduction Gearing & Elevation Drive.
CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Work Table Photo Close-up Work Table.      CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Copy Table Photo Close-up Copy Table.     CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Supplemental Table & Drag Table Photo Close-up Supplemental Table & Drag Table.
 CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Variable Speed Chart & Downfeed Mechanism Photo Close-up Variable Speed Chart & Downfeed Mechanism.       CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Hi - Low Speed Motor Switch Photo Close-up Hi - Low Speed Motor Switch.
CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Tooling Photo Tooling.    CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Tooling Photo Tooling.     CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Tooling Photo Tooling.    CLICK HERE FOR PHOTO friedrich deckel universal pantograph engraving and die sinking machine_modle KF12_three dimensional_ capacity-cutting spindles -collet 3/4" -Morse 2_20mm_infinitely variable spindle speeds 60 thru 10000 rpm_rough milling spindle speeds 60 – 1000 rpm_finish milling spindle 350 -10,000 rpm_high finish – milling spindle 6,500 – 2,000 rpm_STATIONARY WORK TABLE clamping area 9.85" x 27.6"_250mm – 700mm_maximum distance spindle nose to clamping surface 18.7"_475mm_longitudinal travel 11.8"_300mm_transverse travel 7.9"_200mm_line byline feed Increment-longitudinal and transverse 0.003” to 0.015”_0.1 to 0.5mm_STATIONARY COPYHOLDER TABLE: clamping area 16.9" x 23.6"_430mm – 600mm_with manual and power elevation_maximum distance tracing stylus to clamping surface 16.9"_430mm)_SUPPLEMENTAL WORKTABLE TOP17.7" x 17.7"_450 x 450mm_maximum distance spindle nose to clamping surface 16.7"_425mm_maximum displacement in relation to stationary table 3.94"_100mm_DRAG TABLE clamping area 15.75" x 15.75"_400 x 400mm_maximum distance tracing stylus to clamping surface 13.8"_350mm_micrometer adjustment, two directions 1.97"_50mm_ PARALLEL GUIDING MECHANISM & TOOL SLIDE distance, cutter to stylus 17.7” or 13.8”_450mm 350mm_vertical travel of mechanism1.97”_50mm_horizontal travel of tool slide 11.8” or 7.1”_300mm 180mm_range of automatic downfeed 0.003” to o.015”_0.1 to 0.5mm_PANTOGRAPH RATIO 1:1 & 1:1½ 1:1 to 4:1 ratio_EQUIPPED WITH 1-rough milling spindle unit_1-finish milling spindle unit_1-fine finishing spindle unit_1-angular spindle units with associated angular tracer pin holder_1-pantograph system and cutter guide mechanism_1-spindle parallel guiding mechanism_1-symmetrical duplicating attachment with clamping table assembly_1-angular stylus holding bracket_1-auxiliary table_1-drag table assembly_1-movable copyholder table_1-stationary copyholder table_1-pattern forming attachment with bearing arm for crankpin_1-optical tracing attachment_1-immobilizing bracket with 4-positions for clamping the cutter spindle_1-enlarging and reducing attachment_2-handwheel reduction gearing_1- copy holder table for type face 4Ύ" x 17⅜"_3-letter sets_25 collets_miscellaneous cutter extensions_ miscellaneous cutters_ miscellaneous tracing stylus_miscellaneous wrenches_ miscellaneous drive belts_ miscellaneous bolts_work light_1-tool storage cabinet_ MOTOR DRIVE spindle 0.9 - 1.1 kw -220 volts 3 phase_ rapid traverse elevation 0.37 kw_Serial Number 1915_Photo Close-up Tooling Photo Tooling Storage Cabinet.



  COPY CARVING MACHINES,
Multiple Spindles, Pantograph Type



 

IF YOU DON’T SEE IT ??
*PLEASE*
CALL  1-213-627-2847
FAX  1-213- 627-2499   or
E-mail us at  sales@centurymachinery.com

  

TOP $$$ PAID for
ONE MACHINE or ENTIRE PLANT
" THANK YOU for taking the time to visit our Web Site "