BRAKES: HAND & POWER
Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, BRAKES CATEGORIES ARE IN ALPHABETICAL ORDER.

*BOX & PAN BRAKES*
*NEW BOX & PAN BRAKES*
*LEAF HAND BRAKES*
*NEW HAND BRAKES*
*POWER PRESS BRAKES: Mechanical and Hydraulic*


If you require a Quote Sheet PLEASE  send  us your requirements:
CENTURY MACHINERY COMPANY INC.
 1937 South Santa Fe Avenue
Los Angeles, California 90021

 Email  sales@centurymachinery.com
Website  www.centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499


 BOX & PAN BRAKES  B6968-

16 gauge x 36 inch DI ACRO  BOX and PAN HAND BRAKE
Model 36
Finger Extension 6"
Equipped with
Box Finger Extensions  (three) 6"   (two) 3",  (two0 1¼", (one) 1",   (one) 3/4"
     (one) 9⅛" with ¼" radius,  (one) 12¼" with offset radius.
(one) FORMING BAR 36" wide transforms unit to full length leaf brake.
Inventory Reference B6968-9732



14 gauge x 10 feet CHICAGO BOX and PAN HAND BRAKE
Model W38
Length Finger Extensions 6"
EQUIPPED WITH:
    Bending Fingers (six) – 3” wide      (nine) – 4” wide
                                 (ten) – 5” wide    (2) – 6” wide
    (1) Full length Bending Leaf Die 120” wide
Inventory Reference B6968-9644  CLICK HERE FOR QUOTATION chicago box and pan finger brake_model W38_ capacity bend mild steel 14 gauge x 10 feet_ with set of fingers and full length bending leaf_Ser 117645
CLICK HERE FOR PHOTO chicago box and pan finger brake_model W38_capacity bend mild steel 14 gauge x 10 feet_with full set of fingers and full length bending leaf_Serial 117645  Photo taken prior to clean-up and painting.
See other finished items as example of our finished products.





 "NEW" Jet BOX & PAN  HAND BRAKES    "Bench & Optional Floor Mounted"
    Model BP-2248 22ga. x 48"   Inventory Reference  750122  CLICK HERE FOR PHOTO jet box and pan hand brake_model BP-2248_capacity 22 gauge x 48 inch wide_reference 750112
    Model BP-1648 16ga. x 48"   Inventory Reference 750116  CLICK HERE FOR PHOTO jet box and pan hand brake_model BP-1648_capacity 16 gauge x 48 inch wide_reference 750116








LEAF HAND BRAKES 


22 gauge x 14 feet  wide WYSONG HAND LEAF BRAKE
Model 168-22
Inventory Reference B6950-9643 CLICK HERE FOR QUOTATION wysong apron leaf brake_model 168-22_ capacity 22 gauge x 168 inch _14 feet_ Ser HB5-71
CLICK HERE FOR PHOTO wysong apron leaf brake_model 168-22_capacity 22 gauge x 168 inch_14 feet_Serial HB5-71_PHOTO TAKEN PRIOR TO PAINTING  PHOTO TAKEN PRIOR TO CLEAN-UP AND PAINTING


 

"Photo and  Specification are with-in Camera"      

"NEW" Jet BOX & PAN  HAND BRAKES    "Bench & Optional Floor Mounted"
    Model BP-2248 22ga. x 48"    Inventory Reference 750122  CLICK HERE FOR PHOTO jet box and pan hand brake_model BP-2248_capacity 22 gauge x 48 inch wide_reference 750112
    Model BP-1648 16ga. x 48"    Inventory Reference 750116  CLICK HERE FOR PHOTO jet box and pan hand brake_model BP-1648_capacity 16 gauge x 48 inch wide_reference 750116




 "NEW" Jet HAND LEAF BRAKES
            "Photo and Specifications are with-in Camera's are with-in Camera"
    Model HB-22-48  22ga. x 48" with Optional Floor Stand    Inventory Reference 750022  CLICK HERE FOR PHOTO jet hand leaf brake_ model HB22-48_capacity 22 gauge x 48 inch wide _reference750022
    Model HB-16-48 16ga. x 48" with Optional Floor Stand     Inventory Reference 750016  CLICK HERE FOR PHOTO jet hand leaf brake_model HB16-48, capacity 16 gauge x 48 inch wide_ reference 750016
    Model HB-1697F 16ga. x 97"    Floor Mounted    Inventory Reference 755002  CLICK HERE FOR PHOTO jet hand leaf brake_model HB-1697F_capacity 16 gauge x 97 inch wide_reference 755002




 

POWER PRESS BRAKES
Mechanical and Hydraulic

12 Tons x 24" wide BANTAM POWER PRESS BRAKE
Model B212
PNEUMATIC DRIVEN
Distance between housing 24¼"
Stroke 1¾"
Open Height with/out Die Holder or dies 6½"
Die Bed adjusts up or down, Maximum height below gap housing 1½"
12 tons at 85 psi
Equipped with
   Pro-Gage Rear Operated Manual Back Gage.
   Dual Non repeat trip buttons and Foot Trip.
   Miscelleneous Dies.
Inventory Reference B7015-9730 CLICK HERE FOR QUOTATION bantam pneumatic press brake_capacity 12 ton x 24 inch_model B212_stroke 1.75 inch_open height 8 inch with bottom die holder_upper and lower platten width 24 inch_between housing 24.250 inch_rear operated back gage_Serial B9344


50 Ton x 12' wide  CINCINNATI POWER PRESS BRAKE
Series 3-50
MECHANICAL DRIVE
 Distance between housing 10'-6"
Stroke 3"
Stock per minute, Variable Speed
Die Space Ram Down, Adjustment up 8"
Ram Adjustment 5"
Throat Depth to center of die12½"
Motor Drive 5 hp
 Inventory Reference B7015-9557 CLICK HERE FOR QUOTATION cincinnati power press brake_model 3-350_capacity 50 tons x 12 feet_ between housing 10 ft.6 inch_ stroke 3 inch_ die space stroke down ram up 8 inch_ Serial 29253  CLICK HERE FOR PHOTO cincinnati power press brake_model 3-350_capacity 50 tons x 12 feet_ between housing 10 ft.6 inch_ stroke 3 inch_ die space stroke down ram up 8 inch_ Ser 29253



 12 gauge x 96" (10' over-all width x 14 gauge MERCURY POWER PRESS BRAKE
Series 3506
 MECHANICAL DRIVE
32" Horn located on left side of ram
 Distance between housing 74½"
Stroke 2¾"
Open Height with Die Rail Riser 10½"
Die Space Ram Down, Adjustment Up with 4-5/16" die riser 7¾"
Ram Adjustment 2¼"
Throat Depth to center of die 7"
Motor Drive 5 hp
EQUIPPED WITH  Pneumatic foot trip. Rear adjusted back stops
2- Front sheet supports  Rotating Cam limit Switch
 Inventory Reference B7015-9631 CLICK HERE FOR QUOTATION mercury power press brake_ model 3506_capacity 10 foot over-all_ 12 gauge x 96 inch_ between housing 74.5 inch_ stroke 2.75 inch_ open height 10.5 inch_ Ser 527425L



 PACIFIC Gap (C-Frame) PRESS FORMER  Model 150PF
 Hydraulic Powered
 Capacity 150 Tons
Ram Stroke 13"
Open Height 22.185"
Bed Size 24" x 48"  with 3-T Slots and Cross Slot
Ram 12" x 12" with 2-T Slots
Equipped with Dual Electric Palm Trips and Foot Trip.
   (1) 24" long Press Brake Die Holder
   (1) Rear thru housing Slotted Bed Extension 7" wide x 26" long.
Condition Very little use, Only 462 hours since new.
 Inventory Reference P5102-9724  CLICK HERE FOR QUOTATION pacific c frame hydraulic forming press_model 150PF_capacity 150 ton_13 inch stroke_t-slotted bed 24 inch x 48 inch_throat depth 13 inch centerline of ram_open height 22.185 inch_with 24 inch long press die holder_Serial 5627
This photo shows another press just sold, Please use as example of
    finished product that you can expect.  CLICK HERE FOR PHOTO pacific c frame hydraulic straightening press_capacity 150 tons_model 150PF



 225 Ton x 8' wide  PACIFIC POWER PRESS BRAKE
Model K225-8
HYDRAULIC DRIVE
 Distance between housing 77"
Stroke 12"
Open Height 19.75"
Closed Height 7.75"
Upper and Lower Fixed Platen 8' wide with
   Center Die location slot full length and 18" wide x 72" T-Slotted Section.
Three Speed Pump
Motor Drive to Hydraulic Pump 25 hp
EQUIPPED WITH: Top & Bottom Die Holder.
 Inventory Reference B7015-9645  CLICK HERE FOR QUOTATION pacific hydraulic press brake_capacity 225 ton x 8 feet_model K225-8_BH 76.5 inch_stroke 12 inch_open height 19.75 inch_shut height 7.75 inch_upper - lower platten width 18 inch_3-speed power unit_Ser 6714   CLICK HERE FOR PHOTO pacific hydraulic press brake_capacity 225 ton x 8 feet_model K225-8_BH 76.5 inch_stroke 12 inch_open height 19.75_shut height 7.75 inch_upper and lower platten width 18 inch_3-speed power unit_Serial 6714 Front view.
 CLICK HERE FOR PHOTO pacific hydraulic press brake_capacity 225 ton x 8 feet_model K225-8_BH 76.5 inch_stroke 12 inch_open height 19.75_shut height 7.75 inch_upper & lower platten width 18 inch_3-speed power unit_Serial 6714_Close-up Bed View Upper & Lower Platen.       CLICK HERE FOR PHOTO pacific hydraulic press brake_capacity 225 ton x 8 feet_model K225-8_BH 76.5 inch_stroke 12 inch_open height 19.75_shut height 7.75 inch_upper & lower platten width 18 inch_3-speed power unit_Serial 6714_Controls View Controls.
 CLICK HERE FOR PHOTO pacific hydraulic press brake_capacity 225 ton x 8 feet_model K225-8_BH 76.5 inch_stroke 12 inch_open height 19.75_shut height 7.75 inch_upper & lower platten width 18 inch_3-speed power unit_Control Buttons View Control Buttons.      CLICK HERE FOR PHOTO pacific hydraulic press brake_capacity 225 ton x 8 feet_model K225-8_BH 76.5 inch_stroke 12 inch_open height 19.75_shut height 7.75 inch_upper & lower platten width 18 inch_3-speed power unit_Tonnage Control Tonnage Control.
CLICK HERE FOR PHOTO pacific hydraulic press brake_capacity 225 ton x 8 feet_model K225-8_BH 76.5 inch_stroke 12 inch_open height 19.75_shut height 7.75 inch_upper & lower platten width 18 inch_3-speed power unit_Tonnage Control Rear.


300 Ton x 12' wide  PACIFIC POWER PRESS BRAKE
Model 300
HYDRAULIC DRIVE
 Distance between housing 125½"
Stroke 12"
Open Height 20"
Closed Height 8"
Throat depth 10" center of platen.
Upper Die Holder Standard Width 3"
Lower Fixed Wide Platen 24¼" F-B depth  x 120" Length and located on each end
   8" F-B depth x 12" Length.  Total over-all 144"
   Center Die location T-Slotted full length. Front and Rear T-Slots
Motor Drive to Hydraulic Pump 30 hp
 Inventory Reference B7015-9742  CLICK HERE FOR QUOTATION pacific hydraulic press brake_capacity 300 ton x 12 foot_model 300-12_distance between uprights 126.5 inch_stroke 12 inch_ open heigth 20 inch_close height 8 inch_10 inch throat_wide lower platen_standard width upper_Serial 3206
CLICK HERE FOR PHOTO pacific hydraulic press brake_capacity 300 ton x 12 foot_model 300-12_distance between uprights 126.5 inch_stroke adjustable thru 12 inch_open height 20 inch_closed height 8 inch_10 inch throat_wide lower platen_standard width upper die holder 3 inch wide_Serial 3206 Photo taken prior to clean-up.



400 Ton x 8' wide  PACIFIC POWER PRESS BRAKE
Model K400-8
HYDRAULIC DRIVE
 Distance between housing 76½"
Stroke 12"
Open Height 20"
Closed Height 8"
Upper and Lower Fixed Platen 8' wide with
   Center Die location slot full length and 18" wide x 72" T-Slotted Section.
Three Speed Pump
Motor Drive to Hydraulic Pump 40 hp
 Inventory Reference B7015-9646  CLICK HERE FOR QUOTATION pacific hydraulic press brake_capacity 400 ton x 8 feet_model K400-8_BH 76.5 inch_stroke 12 inch_open height 20_shut height 8 inch_upper and lower platten width 18 inch_Ser 3503  CLICK HERE FOR PHOTO pacific hydraulic press brake_capacity 400 ton x 8 feet_model K400-8_BH 76.5 inch_stroke 12 inch_open height 19.75_shut height 7.75 inch_upper & lower platten width 18 inch_Serial 3503_right to front Front view.
750 Ton x 16' wide  BERTSCH POWER PRESS BRAKE
HYDRAULIC DRIVE     Date Mfg  1989
Distance between housing 150"
Stroke 12"
Open Height 21"
Closed Height 10"
Throat Depth 14"
Two Speed Ram
Equipped with   Digital Operated Back Gauge   Adjustable Tonnage Control
Excellent Condition    "Very low usage"
Photos CLICK HERE FOR RIGHT TO FRONT VIEW bertsch hydraulic press brake_ capacity 16 feet x 750 Tons_ distance between housing 150 inch_ stroke 12 inch_ open height 22 inch_ closed height 10 inch_ 2-speed_ cnc back gage  CLICK HERE FOR LEFT TO FRONT VIEW bertsch hydraulic press brake_ capacity 16 feet x 750 Tons_ distance between housing 150 inch_ stroke 12 inch_ open height 22 inch_ closed height 10 inch_ 2-speed_ cnc back gage  CLICK HERE FOR REAR VIEW bertsch hydraulic press brake_ capacity 16 feet x 750 Tons_ distance between housing 150 inch_ stroke 12 inch_ open height 22 inch_ closed height 10 inch_ 2-speed_ cnc back gage 
 Inventory Reference B7015-19132   CLICK HERE FOR QUOTATION bertsch hydraulic press brake_ capacity 16 feet x 750 Tons_ distance between housing 150 inch_ stroke 12 inch_ open height 22 inch_ closed height 10 inch_ 2-speed_ cnc back gage





 

Phone  1-213-627-2847           Fax  1-213-627-2499
E-Mail us at  sales@centurymachinery.com
"THANK YOU for taking the time to visit our web site"