"PROFILERS,  ROUTERS ,TRACER MILLS
and PANTOGRAPH COPY CARVING MACHINES"
Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, CATEGORIES ARE IN ALPHABETICAL ORDER.

*CARVING MACHINES, MULTI- SPINDLES, Pantograph Type*
*MILLERS, TRACERS*
*PROFILERS CNC, 3 & 5 Axis*
 *ROUTERS  CNC, 3 & 5 AXIS*
*SPINDLES, High Speed*

If you require a Quote Sheet PLEASE  send  us your requirements:
CENTURY MACHINERY COMPANY INC.
 1937 South Santa Fe Avenue
Los Angeles, California 90021
Email sales@centurymachinery.com
Website www.centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499

  CARVING MACHINES, MULTI- SPINDLES, Pantograph Type  P0298-

24 Spindles L. ANDREONI  MULTI SPINDLE CARVING MACHINE, Pantograph
Model 38-11-70
Dual Carving Head with 1.2 hp motor
SPINDLES  LOCATED ON OPPOSITE END OF DRIVE MOTOR
Spindle Center to Center 8"
Workpiece Length adjustable thru 77" maximum
two Spindle Speeds: 10,700 rpm. & 18,000 rpm
Reversible Motors (dual spindle) total 48 cutters
All Carving Heads swivel 360 degrees with Pneumatic locking.
Equipped with: (Two) Frequency Converters each 13 hp. 180-300 cycles
    Power Work Piece Rotation
    Pneumatic Instrument for placement of the piece of work.
 Inventory Reference P0298-9277 CLICK HERE FOR QUOTATION: P0298-9277, andreoni 24 spindle carving machine, style AL-R-REV, model 38-11-70, work piece length 77 inch, spindle rpm 10700 and 18000 rpm, ser. 3265   CLICK HERE FOR PHOTO: andreoni 24 spindle carving machine, style AL-R-REV, model 38-11-70, work piece length 77 inch, spindle rpm 10700 and 18000 rpm, ser. 3265  CLICK HERE FOR PHOTO: andreoni 24 spindle carving machine, style AL-R-rREV, model 38-11-70, work piece length 77 inch, spindle rpm 10700 and 18000 rpm







 

MILLERS, TRACERS 

      SORRY!   NONE  IN STOCK







 

PROFILERS CNC, 3 & 5 Axis    P8227-

5-Axis CINCINNATI MILACRON Vertical Honeycomb Profiler
Model 20V     Bed Type
 Spindle Speed  Infinitely Variable 7,200 thru 24,000 rpm
Spindle Slide  Vertical Travel (Z-Axis) 24"
Spindle Head Rotates (B-Axis) Tilt -110 degrees to 10 degrees
        (C-Axis) Twist +/- 190 degrees
Spindle Carrier: Auto Tilt Type
WORK HEIGHT Spindle Pivot point to Working Surface 5.75" Minimum.
        Maximum 29.75"
TABLE  SIZE 40"x130"
Longitudinal Travel (X-Axis) 120"
Transverse (Y-Axis) 42".
Equipped with7Spindle Cooling  Glycol with Chiller
    Dust Collection System
    RS232 Port with 2nd Computer
 Inventory Reference  P8227-6917  CLICK HERE FOR QUOTATION: cincinnati milacron 5 axis vertical honeycomb profiler, model 20V, table size 40 inch x 120 inch spindle speeds vari 7200 thru 24,000 rpm,max. working height 29.75 inch, mfg.87 Second computer
"Very little Use"    *A MUST SEE*
   CLICK HERE FOR PHOTO: cincinnati milacron 5 axis vertical honeycomb profiler, model 20V, table 40 in. x 120 in. spindle speeds vari 7200 - 24,000 rpm, max. working height 29.75 in, view looking down Machine w/ Dust Collector at extreme right.
 CLICK HERE FOR PHOTO: cincinnati milacron 5 axis vertical honeycomb profiler, model 20V, table 40 in. x 120 in. spindle speeds vari 7200 - 24,000 rpm, max. working height 29.75 in, 4 photos spindle head Four Photos Router Head.
 CLICK HERE FOR PHOTO: cincinnati milacron 5 axis vertical honeycomb profiler, model 20V, table 40 in. x 120 in. spindle speeds vari 7200 - 24,000 rpm, max. working height 29.75 in, 2- photos exhaust system Photo's Exhaust Collection System      Book photo CLICK HERE FOR PHOTO: cincinnati milacron 5 axis vertical honeycomb profiler, model 20v, table 40 in. x 120 in. spindle speeds vari 7200 - 24,000 rpm, max. working height 29.75 in, book photo







 

ROUTERS  CNC, 3 & 5 AXIS    R8906-

    "WE ARE ALWAYS LOOKING TO PURCHASE 3 & 5 axis CNC ROUTERS"

THREE AXIS
▼▼▼
3-Axis KOMO Vertical CNC ROUTER and DRILL,   Model VR-805-Q,   Year Mfg 1995
Moving Bed & Heads 
 Four (4) ROUTING SPINDLES each: 12½ Hp. 18,000 rpm.
Four (4) BORING & DRILL SPINDLES Piggyback
Spindle Head Spacing Adjustable 10" thru 24" centers.
WORK ENVELOPE 96" x 60" x 6"
Equipped with  GE Fanuc OM Control.
        VACUUM TABLE.
        1-Sullair Vacuum Pump   Inventory Reference R8906-9221 CLICK HERE FOR QUOTATION komo 3-axis cnc router and drill_model VR805Q_table 60 inch x 96 inch_4-routers 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axis 71.5 inch_Z-axis 8 inch_mfg 1995_Serial 12446944
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_table 60 inch x 96 inch_4-routers 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axis 71.5 inch_Z-axis 8 inch_mfg 1995_Ser 12446944 Router.       CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_ table 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axs 71.5 inch_Z-axis 8 inch_mfg 1994_Serial 1244694_Overall View 4 spindles carriages with Router Spindles and Piggyback Drills View of Routing & Drill Heads.  
 CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_ table 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axs 71.5 inch_Z-axis 8 inch_mfg 1994_Serial 1244694_Carriage with Router Spindle and Drill with Spindle center adjustment Side View  Side View Center Adjustment for Spindle Centers.
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_ table 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axs 71.5 inch_Z-axis 8 inch_mfg 1994_Serial 1244694_Spindle Assembly Left to Right View Close Up Routing Spindle & Piggyback Drill Head.
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_ table 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axs 71.5 inch_Z-axis 8 inch_mfg 1994_Serial 1244694_Front view Router and Piggyback Drill Head Close up Piggyback Drill Head.
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_ table 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axs 71.5 inch_Z-axis 8 inch_mfg 1994_Serial 1244694_Router & Piggyback Drill located on right side of cross rail.  Close up Right End Router Head & Piggyback Drill located on right side.
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_ table 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axs 71.5 inch_Z-axis 8 inch_mfg 1994_Serial 1244694_Fanuc O-M CNC Control GE Fanuc O-M Operator Control.     CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_ table 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axs 71.5 inch_Z-axis 8 inch_mfg 1994_Serial 1244694_Close up Hand Contro  Hand Control.
 CLICK HERE FOR PHOTO sullair 30 Hp_Vacuum Pump RSVS-12_with Filter_for komo 3-axis cnc router and drill_ model VR805Q_table 60 inch x 96 inch_four routers each 12 hp_ 18000 rpm_4-drill heads_mfg 1994_ Serial 1244694  Photo Sullair Vacuum Pump.         CLICK HERE FOR PHOTO Vaccumm Filter_sullair 30 Hp_Vacuum Pump RSVS-12_with Filter_for komo 3-axis cnc router and drill_ model VR805Q_table 60 inch x 96 inch_four routers each 12 hp_ 18000 rpm_4-drill heads_mfg 1994_ Serial 1244694 Vacuum Filter. 



3-Axis KOMO Vertical CNC ROUTER and DRILL
Model VR-805-Q         Year Mfg November 1990
Moving Bed and Heads 
Four (4) ROUTING SPINDLES each 12½ Hp  18,000 rpm
Four (4) BORING & DRILL SPINDLES Piggyback
Spindle Head Spacing Adjustable 10" thru 24" centers
WORK ENVELOPE 96" x 60" x 6"
Equipped with GE Fanuc OM Control.
        VACUUM TABLE.    .
        1-Ingersoll Rand Vacuum Pump
Inventory Reference R8906-9222 CLICK HERE FOR QUOTATION komo 3-axis cnc router and drill_model VR805Q_table 60 inch x 96 inch_4-routers 12 hp_18000 rpm_4- drill heads_vacuum chuck_X-axis 244 inch_Y-axis 71.5 inch_Z-axis 8 inch_mfg 11-1990_Ser 1552  CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_table 60 inch x 96 inch_four 12 hp 18000 rpm head_four drill heads_mfg 1990_vacuum chuck_X-axis 244 inch_Y-axis 71.5 inch_Z-axis 8 inch_mfg 11-1990_Serial 1552




 

SPINDLES, High Speed 

LARGE SELECTION of ROUTING SPINDLES  Sold As-Is or Re-built
"As-Is Routing Spindles are all in Very Good to Excellent Running Condition"

$AVE 50% or more OFF NEW COST

    LIKE NEW  ONSRUD Louis Allis Routing Spindle   8HP    15,000 rpm
                     250 cycles. 230 volts
                     Model 135-437      Frame Size 424
                     Exterior Fan Mounted Above Head      Inventory Reference  R8903-6221  CLICK HERE FOR PHOTO: onsrud routing spindle lewis allis, model cmo, 8 hp. type 135-437, 15,000 rpm, 230 volts, 250 cycles, frame 424
          New Cost $9,500.00      Our discounted price $6,500.00

used ONSRUD LOUIS ALLIS ROUTING SPINDLE,   8 HP   14,000 rpm
    240 cycles,     230 volts
    Model 135-145    Frame Size 424
 Inventory Reference R8903-5347 CLICK HERE FOR PHOTO: onsrud lewis allis 8 hp. routing head, type ctx, number 135-145, 14,700 rpm, 230 volts, 250 cycles, Frame 424
New Cost $9,000.00      Our discounted price $5,000.00



 Email us your requirement at sales@centurymachinery.com

 THE FOLLOWING ROUTING SPINDLES in stock:

EKSTROM CARLSON ROUTING SPINDLE, 5 Hp, 15,000 rpm,  250 cycles,  306 volts


CONTINENTAL  ELECTRIC ROUTING SPINDLE, 10 Hp, 10,700 rpm.
         240 cycles, 220 volts.


ONSRUD ROUTING SPINDLE, 12½ Hp, 11,200 rpm.  180 cycles,   220 volts,
         (also have 360 volts).


ONSRUD ROUTING SPINDLE,  5 Hp,  14750 rpm, 240 cycles, 220 volts and 440 volts


MARWIN  ROUTING SPINDLE, Multiple Hp 15/10/9
         Three Speed Ranges: 5,200 / 8750 / 10,400 rpm.

PLEASE CONTACT US FOR: QUOTES & PHOTO'S
Phone 213-627-2847     Fax 213-627-2499  or
 E-Mail sales@centurymachinery.com
"THANK YOU for taking the time to visit our web site"