PROFILERS & ROUTERS "All types"
Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, CATEGORIES ARE IN ALPHABETICAL ORDER.

*COPY CARVING MACHINES  Multiple Spindles*
*PROFILERS, CNC: 3 and 5 Axis, CINCINNATI MILACRON*
*CNC ROUTERS, 3 and 5 Axis*
*PIN ROUTERS, Mfg. by Ekstrom Carlson  and Onsrud*
*RADIAL ARM ROUTERS and DRILLS, Mfg. by Ekstrom Carlson and Onsrud*
*ROUTERS,  SHAPERS VERTICAL, Under Table Spindle, Tilting and None Tilting Spindle, Mfg. by Onsrud, Oliver, Orton, Dependable and Greenlee*
*ROUTING SPINDLES HEADS: High Speed*

LARGEST SELECTION IN THE U.S.A.
*ONSRUD Pin Routers,*          Onsrud Radial Arm Routers*
C.R Onsrud Inverted Routers
EKSTROM CARLSON Pin Routers*
*EKSTROM CARLSON Radial Arm Routers*
*ORTON  Routers / Shapers Inverted Tilting Spindle*
*Oliver Shapers*  and     CNC Routers 3 and 5 Axis
RECONDITIONED             or                      " REBUILT "

If you require a Quote Sheet PLEASE  send  us your requirements:
 CENTURY MACHINERY COMPANY INC.
 1937 South Santa Fe Avenue
Los Angeles, California 90021
Email sales@centurymachinery.com

Website  www.centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499


 

 COPY CARVING MACHINES
Multiple Spindles  P0298-

24 Spindles L. ANDREONI  MULTIPLE SPINDLE CARVING MACHINE, Pantograph
Model 38-11-70
Dual Carving Head with 1.2 hp motor
(SPINDLES  LOCATED ON OPPOSITE END OF DRIVE MOTOR)
Spindle Center to Center 8"
Workpiece Length adjustable thru 77" maximum
Two Spindle Speeds: 10,700 rpm. & 18,000 rpm
Reversible Motors (dual spindle) total 48 cutters
All Carving Heads swivel 360 degrees with Pneumatic locking
Equipped with: (Two) Frequency Converters each 13 hp   180-300 cycles
    Power Work Piece Rotation
    Pneumatic Instrument for placement of the piece of work
 Inventory Reference P0298-9277 CLICK HERE FOR QUOTATION andreoni 24 spindle carving machine_style AL-R-REV_model 38-11-70_work piece length 77 inch_spindle rpm 10700 and 18000 rpm_Serial 3265  Photos CLICK HERE FOR PHOTO andreoni 24 spindle carving machine_style AL-R-REV_model 38-11-70_work piece length 77 inch_spindle rpm 10700 and 18000 rpm_Serial 3265  CLICK HERE FOR PHOTO andreoni 24 spindle carving machine_style AL-R-REV_model 38-11-70_work piece length 77 inch_spindle rpm 10700 and 18000 rpm_Serial 3265



2 - DIMENSION PANTOGRAPH ENGRAVERS
Single Spindle
▼▼
 LARS PANTOGRAPH ENGRAVING MACHINE
Model P1-2
TWO DIMENSIONAL
CAPACITY:
Swing & engrave to center of a:
        Disc: Thick x Diameter...................................................... 5" x 38"
        Drum: Height x Diameter................................................... 11" x 22"
RATIO:
     1:1 Full Size down to 40-1 are obtainable.
SPINDLE SPEEDS APPROXIMATE:  4700, thru18000, rpm
2- WORK TABLES: All Feeds by Hand
    Main Table, 4-T Slots, Size:................................................... 8" X 18"
    Ad on Top Table, 3-T Slots, Size............................................ 18” x 24”
COPY TABLE: Size.................................................................. 8⅞" x 23¾"    
MOTOR DRIVE: 1/4 HP. 115 volts, 1 Phase*
Inventory Reference P0298-9731 CLICK HERE FOR QUOTATION lars 2- dimensional pantograph engraving machine_model P1-2l_8 spindle speeds 4700 thru 18000 rpm_table size 8 inch x 18 inch_drive 0.250 hp single phase_Serial 80F-75656   CLICK HERE FOR PHOTO lars 2-dimensional pantograph engraving machine_model P1-2_8 spindle speeds 4700 thru 18000 rpm_table size 8 inch x 18 inch_drive 0.250 hp single phase_Serial 80F-75656  CLICK HERE FOR PHOTO lars 2-dimensional pantograph engraving machine_model P1-2_8 spindle speeds 4700 thru 18000 rpm_table size 8 inch x 18 inch_drive 0.250 hp single phase_Serial 80F-75656      CLICK HERE FOR PHOTO lars pantograph engraving machine_model P1-2_two dimensional_8 spindle speeds 4700 thru 18000 rpm_table size 8 inch x 18 inch_drive 0.250 hp single phase_Serial 80F-75656_view bottom of both tables View of both work tables.

 

PROFILERS, CNC: 3 and 5 Axis, CINCINNATI MILACRON    R8906-

5- AXIS PROFILERS
5- AXIS PROFILERS
5-Axis CINCINNATI MILACRON Vertical Honeycomb Profiler  
Model 20V       Bed Type
 Spindle Speed, Infinitely Variable 7,200 thru 24,000 rpm
Spindle Slide  Vertical Travel (Z-Axis) 24"
Spindle Head Rotates (B-Axis) Tilt -110 degrees to 10 degrees.
        (C-Axis) Twist +/- 190 degrees
Spindle Carrier  Auto Tilt Type
WORK HEIGHT Spindle Pivot point to Working Surface 5.75" Minimum
        Maximum 29.75"
TABLE  SIZE 40" x 130"
Longitudinal Travel (X-Axis) 120"     Transverse (Y-Axis) 42"
Equipped with 7Spindle Cooling Glycol with Chiller
    Dust Collection System
    RS232 Port with 2nd Computer  Inventory ReferenceP8227-6917  CLICK HERE FOR QUOTATIO cincinnati milacron 5 axis vertical honeycomb profiler_ model 20V_ table size 40 inch x 120 inch_spindle speeds vari 7200 thru 24,000 rpm_maximum working height 29.75 inch_ mfg.87_Second computer
"Very little Use"    *A MUST SEE*
 CLICK HERE FOR PHOTO cincinnati milacron 5 axis vertical honeycomb profiler_ model 20V_ table size 40 inch x 120 inch_spindle speeds vari 7200 thru 24,000 rpm_maximum working height 29.75 inch_ mfg.87_Second computer_dust exhaust collection system_spindle bearing cooling systemview looking down  Machine w/ Dust Collector at extreme right
 CLICK HERE FOR PHOTO cincinnati milacron 5 axis vertical honeycomb profiler_ model 20V_ table size 40 inch x 120 inch_spindle speeds vari 7200 thru 24,000 rpm_maximum working height 29.75 inch_ mfg.87_Second computer_dust exhaust collection system_spindle bearing cooling system_4 photos spindle head  Four Photos Router Head
 CLICK HERE FOR PHOTO cincinnati milacron 5 axis vertical honeycomb profiler_ model 20V_ table size 40 inch x 120 inch_spindle speeds vari 7200 thru 24,000 rpm_maximum working height 29.75 inch_ mfg.87_Second computer_dust exhaust collection system_spindle bearing cooling system_ 2- photos exhaust system  Photo's Exhaust Collection System      Book photo CLICK HERE FOR PHOTO cincinnati milacron 5 axis vertical honeycomb profiler_ model 20V_ table size 40 inch x 120 inch_spindle speeds vari 7200 thru 24,000 rpm_maximum working height 29.75 inch_ mfg.87_Second computer_dust exhaust collection system_spindle bearing cooling system book photo


5-Axis CINCINNATI MILACRON CNC HYDROTEL VERTICAL MILLER
    Model 20V-120
Working Surface 40" x 120"
Inventory ReferenceM1748-5918
This Profiler is sold. Please use as example as how we finish our machines.
Two photo's with-in. CLICK HERE FOR PHOT cincinnati milacron_ 5 axis CNC vertical profiler mill





5-Axis CINCINNATI MILACRON CNC HYDROTEL VERTICAL MILLER
    Model 20V-80
Spindle Taper 50MT
Working Surface T-Slotted Bed 30" x 80"
Capacity: X-Axis 80".    Y-Axis 30".    Z-Axis 24".
        A-Axis +/- 25 degrees.    B-Axis +/- 25 degrees.
 Equipped with: 30 Position Automatic Tool Changer.
    RS232 Port for 2nd Computer     
Inventory Reference M1748-6972   SALE PENDING
 CLICK HERE FOR PHOTOS cincinnati milacron cnc hydrotel vertical miller_model 20V-80_ working surface 30 inch x 80 inch_X-axis 80 inch_ Y-axis 30 inch_Z-axis 24 inch_ A -B axis 25 degrees, 30 position tool changer CLICK HERE FOR PHOTOS cincinnati milacron cnc hydrotel vertical miller_model 20V-80_ working surface 30 inch x 80 inch_X-axis 80 inch_ Y-axis 30 inch_Z-axis 24 inch_ A -B axis 25 degrees, 30 position tool changer Photo Machine.
CLICK HERE FOR PHOTOS cincinnati milacron cnc hydrotel vertical miller_model 20V-80_ working surface 30 inch x 80 inch_X-axis 80 inch_ Y-axis 30 inch_Z-axis 24 inch_ A -B axis 25 degrees, 30 position tool changer Photo Table.    Photo Control  CLICK HERE FOR PHOTOS cincinnati milacron cnc hydrotel vertical miller_model 20V-80_ working surface 30 inch x 80 inch_X-axis 80 inch_ Y-axis 30 inch_Z-axis 24 inch_ A -B axis 25 degrees, 30 position tool changer

ROUTERS, CNC, 3 and 5 Axis  R8906-

    "WE ARE ALWAYS LOOKING TO PURCHASE  3 & 5 axis CNC ROUTERS"

 THREE AXIS
▼▼▼
3-Axis KOMO Vertical CNC ROUTER and DRILL,   Model VR-805-Q,   Year Mfg 1995
Moving Bed & Heads 
 Four (4) ROUTING SPINDLES each: 12½ Hp. 18,000 rpm.
Four (4) BORING & DRILL SPINDLES Piggyback
Spindle Head Spacing Adjustable 10" thru 24" centers.
WORK ENVELOPE 96" x 60" x 6"
Equipped with  GE Fanuc OM Control.
        VACUUM TABLE.
        1-Sullair Vacuum Pump   Inventory Reference R8906-9221 CLICK HERE FOR QUOTATION komo 3-axis cnc router and drill_model VR805Q_table 60 inch x 96 inch_4-routers 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axis 71.5 inch_Z-axis 8 inch_mfg 1995_Serial 12446944
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_table 60 inch x 96 inch_4-routers 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axis 71.5 inch_Z-axis 8 inch_mfg 1995_Ser 12446944 Router.       CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_ table 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axs 71.5 inch_Z-axis 8 inch_mfg 1994_Serial 1244694_Overall View 4 spindles carriages with Router Spindles and Piggyback Drills View of Routing & Drill Heads.  
 CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_ table 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axs 71.5 inch_Z-axis 8 inch_mfg 1994_Serial 1244694_Carriage with Router Spindle and Drill with Spindle center adjustment Side View  Side View Center Adjustment for Spindle Centers.
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_ table 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axs 71.5 inch_Z-axis 8 inch_mfg 1994_Serial 1244694_Spindle Assembly Left to Right View Close Up Routing Spindle & Piggyback Drill Head.
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_ table 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axs 71.5 inch_Z-axis 8 inch_mfg 1994_Serial 1244694_Front view Router and Piggyback Drill Head Close up Piggyback Drill Head.
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_ table 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axs 71.5 inch_Z-axis 8 inch_mfg 1994_Serial 1244694_Router & Piggyback Drill located on right side of cross rail.  Close up Right End Router Head & Piggyback Drill located on right side.
CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_ table 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axs 71.5 inch_Z-axis 8 inch_mfg 1994_Serial 1244694_Fanuc O-M CNC Control GE Fanuc O-M Operator Control.     CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_ table 60 inch x 96 inch_four routers each 12 hp_18000 rpm_4-drill heads_vacuum chuck_X-axis 244 inch_Y-axs 71.5 inch_Z-axis 8 inch_mfg 1994_Serial 1244694_Close up Hand Contro  Hand Control.
 CLICK HERE FOR PHOTO sullair 30 Hp_Vacuum Pump RSVS-12_with Filter_for komo 3-axis cnc router and drill_ model VR805Q_table 60 inch x 96 inch_four routers each 12 hp_ 18000 rpm_4-drill heads_mfg 1994_ Serial 1244694  Photo Sullair Vacuum Pump.         CLICK HERE FOR PHOTO Vaccumm Filter_sullair 30 Hp_Vacuum Pump RSVS-12_with Filter_for komo 3-axis cnc router and drill_ model VR805Q_table 60 inch x 96 inch_four routers each 12 hp_ 18000 rpm_4-drill heads_mfg 1994_ Serial 1244694 Vacuum Filter. 



3-Axis KOMO Vertical CNC ROUTER and DRILL
Model VR-805-Q         Year Mfg November 1990
Moving Bed and Heads 
Four (4) ROUTING SPINDLES each 12½ Hp  18,000 rpm
Four (4) BORING & DRILL SPINDLES Piggyback
Spindle Head Spacing Adjustable 10" thru 24" centers
WORK ENVELOPE 96" x 60" x 6"
Equipped with GE Fanuc OM Control.
        VACUUM TABLE.    .
        1-Ingersoll Rand Vacuum Pump
Inventory Reference R8906-9222 CLICK HERE FOR QUOTATION komo 3-axis cnc router and drill_model VR805Q_table 60 inch x 96 inch_4-routers 12 hp_18000 rpm_4- drill heads_vacuum chuck_X-axis 244 inch_Y-axis 71.5 inch_Z-axis 8 inch_mfg 11-1990_Ser 1552  CLICK HERE FOR PHOTO komo 3-axis cnc router and drill_model VR805Q_table 60 inch x 96 inch_four 12 hp 18000 rpm head_four drill heads_mfg 1990_vacuum chuck_X-axis 244 inch_Y-axis 71.5 inch_Z-axis 8 inch_mfg 11-1990_Serial 1552
5- AXIS PROFILERS
5-Axis CINCINNATI MILACRON Vertical Honeycomb Profiler  
Model 20V,    Bed Type
 Spindle Speed, Infinitely Variable 7,200 thru 24,000 rpm
Spindle Slide, Vertical Travel (Z-Axis) 24"
Spindle Head Rotates (B-Axis) Tilt -110 degrees to 10 degrees.
        (C-Axis) Twist +/- 190 degrees
Spindle Carrier: Auto Tilt Type
WORK HEIGHT: Spindle Pivot point to Working Surface 5.75" Minimum.
        Maximum 29.75"
TABLE  SIZE 40" x 130"
Longitudinal Travel (X-Axis) 120".    Transverse (Y-Axis) 42".
Equipped with:7Spindle Cooling: Glycol with Chiller.
    Dust Collection System.
    RS232 Port with 2nd Computer     Inventory Reference P8227-6917  CLICK HERE FOR QUOTATION: cincinnati milacron 5 axis vertical honeycomb profiler, model 20v, table size 40 inch x 120 inch spindle speeds vari 7200 thru 24,000 rpm,max. working height 29.75 inch, mfg.87 Second computer
"Very little Use"    *A MUST SEE*
 CLICK HERE FOR PHOTO: cincinnati milacron 5 axis vertical honeycomb profiler, model 20V, table 40 in. x 120 in. spindle speeds vari 7200 - 24,000 rpm, max. working height 29.75 in, view looking down  Machine w/ Dust Collector at extreme right.
 CLICK HERE FOR PHOTO: cincinnati milacron 5 axis vertical honeycomb profiler, model 20V, table 40 in. x 120 in. spindle speeds vari 7200 - 24,000 rpm, max. working height 29.75 in, 4 photos spindle head  Four Photos Router Head.
 CLICK HERE FOR PHOTO: cincinnati milacron 5 axis vertical honeycomb profiler, model 20V, table 40 in. x 120 in. spindle speeds vari 7200 - 24,000 rpm, max. working height 29.75 in, 2- photos exhaust system  Photo's Exhaust Collection System      Book photo CLICK HERE FOR PHOTO: cincinnati milacron 5 axis vertical honeycomb profiler, model 20v, table 40 in. x 120 in. spindle speeds vari 7200 - 24,000 rpm, max. working height 29.75 in, book photo




5-Axis CINCINNATI MILACRON CNC HYDROTEL VERTICAL MILLER
    Model 20V-120
Working Surface 40" x 120"
Inventory Reference M1748-5918
This Profiler is sold. Please use as example as how we finish our machines.
Two photo's with-in. CLICK HERE FOR PHOTO cincinnati milacron 5 axis vertical profiler mill





5-Axis CINCINNATI MILACRON CNC HYDROTEL VERTICAL MILLER
    Model 20V-80
Spindle Taper 50MT
Working Surface T-Slotted Bed 30" x 80"
Capacity: X-Axis 80".    Y-Axis 30".    Z-Axis 24".
        A-Axis +/- 25 degrees.    B-Axis +/- 25 degrees
 Equipped with: 30 Position Automatic Tool Changer.
    RS232 Port for 2nd Computer     Inventory Reference M1748-6972
 Photo Machine.
Photo Table.    Photo Control 











PIN ROUTERS, 
  Mfg. by Ekstrom Carlson  and Onsrud  R8903-


ONSRUD PIN ROUTERS (Re-Built):  R8903-

ONSRUD PIN ROUTER, Model W1124
    24" throat
    Spindle Speeds 10,000 and 20,000 rpm.
    Spindle drive 5 hp.
    Table Size 26" x 36"  Inventory Reference R1621 CLICK HERE FOR QUOTATION: onsrud pin router, model W1124, throat depth 24 inch, spindle speeds 10,000 and 20,000 rpm, pneumatic down on spindle, motor drive 5 hp, table 26 inch x 36 inch, table adjust vertically 13 in



ONSRUD PIN ROUTER  Model A1124A
     24" throat  
    Spindle Speeds 10,000  and 20,000 rpm
    Spindle Drive 7.5 hp
    Table Size 26" x 36"      Inventory Reference R8903-9177 CLICK HERE FOR QUOTATION onsrud pin router_model A-1124A_throat depth 24 inch_spindle speeds 10000 - 20000 rpm_spindle drive 5 hp_tilting table 26 inch x 36 inch_Serial 9713  CLICK HERE FOR PHOTO onsrud pin router_model A1124-A, throat depth 24 inch_spindle speeds 10000 and 20000 rpm_table size 26 inch x 36 inch_motor drive 7.5 hp  CLICK HERE FOR PHOTO onsrud pin router_model A1124-A_throat depth 24 inch_spindle speeds 10000 and 20000 rpm_table size 26 inch x 36 inch_motor drive 7.5 hp



ONSRUD PIN ROUTER  Model A1124A
     24" throat    
    Spindle Speeds 10,000  and 20,000 rpm
   Spindle drive 7.5 hp
   Table Size 26" x 36"      Inventory Reference R8903-5338  CLICK HERE FOR QUOTATION onsrud pin router_model A1124A_ throat depth 24 inch_ spindle drive 7.5 and 7.5 hp_ spindle speeds 10000 and 20000 rpm_ tilting table 26 inch x 36 inch_ Ser 9174_ Late Frame  CLICK HERE FOR PHOTO onsrud pin router_model A1124-A_throat depth 24 inch_spindle speeds 10000 and 20000 rpm_table size 26 inch x 36 inch_motor drive 7.5 hp
 
  
 
ONSRUD PIN ROUTER  Model W1124
     24" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 7.5 hp. and 10 hp
    Table Size 26" x 36"    Inventory Reference R8903-5005 CLICK HERE FOR QUOTATION onsrud pin router_model W-1124_throat depth 24 inch_spindle speeds 10000 - 20000 rpm_spindle drive 7.5 and 10 hp_table 25 inch x 36 inch_Late Frame_Serial 11053  CLICK HERE FOR PHOTO onsrud pin router_model W-1124_throat depth 24 inch_spindle speeds 10000 - 20000 rpm_spindle drive 7.5 and 10 hp_table 25 inch x 36 inch_Late Frame_Serial 11053


ONSRUD PIN ROUTER   Model A1136A
     36" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 5 hp
    Table Size 36" x 48"    Inventory Reference R8903-9331



ONSRUD PIN ROUTER, Model A1136
    36" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 7½ hp. and 10 hp
    Spindle travel by pneumatic cylinder Up and Down
    Table Size 26" x 36"               Inventory Reference   R8903-8701  CLICK HERE FOR PHOTO onsrud pin router_model A1136_ throat depth 36 inch_spindle speeds 10000 and 20000 rpm_spindle drive 7.5 and 10 hp_ table 26 inch x 36 inch_Serial 787321-01_ Front View_Late Frame  CLICK HERE FOR PHOTO onsrud pin router_model A1136_ throat depth 36 inch_spindle speeds 10000 and 20000 rpm_spindle drive 7.5 and 10 hp_ table 26 inch x 36 inch_ Serial 787321-01_ Front View_Late Frame
        "THIS ROUTER SOLD USE AS EXAMPLE OF FINISHED PRODUCT"
ONSRUD PIN ROUTER, Model A1136-A
    36" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 7½ hp. and 10 hp
    Spindle travel by pneumatic cylinder Up and Down
    Table Size 26" x 36"               Inventory Reference   R8903-9713  CLICK HERE FOR QUOTATION onsrud horn pin router_model A1136-A_throat depth 36 inch_spindle 10000 - 20000 rpm_drive 10 - 7.5 hp_volt 460_Late Frame_with standard table_Serial 897897-01
PLEASE NOTE: This router is currently set-up as Horn Router and has standard table.



ONSRUD PIN ROUTER  Model W1136A
    36" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 7.5 hp and 10 hp
    Table Size 36" x 48"      Inventory Reference R8903-9661 CLICK HERE FOR QUOTATION onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 - 10 hp_volt 480_table size 36 inch x 48 inch_ Ser 857723-7_Late Frame  CLICK HERE FOR PHOTO onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 - 10 hp_volt 480_table size 36 inch x 48 inch_Serial 857723-7_Late Frame



ONSRUD PIN ROUTER   Model W1136A
    36" throat
    Spindle Speed 10,000  and 20,000 rpm
    Spindle Drive 7.5 hp. thru 7.5 hp
    Table Size 36" x 48"
Inventory Reference  R8903-9213 CLICK HERE FOR QUOTATION onsrud pin router_ model W1136A_throat depth 36 inch_ spindle speed 10000 & 20000_ spindle drive 7.5 & 7.5 hp_220 volts_ table size 36 inch x 48 inch_ Ser 9436
Inventory Reference  R8903-9214 CLICK HERE FOR QUOTATION onsrud pin router_model W1136A_throat depth 36 inch_spindle speed 10000 - 20000_spindle drive 7.5 & 7.5 hp_volt 440_table size 36 inch x 48 inch_Serial 9091_control wall mounted
                                                                                       


CHECK THIS ONE OUT
ONSRUD PIN ROUTER  Model A1136-7M
    36" throat
   Spindle Speeds 10,000 and 20,000 rpm
   Spindle Drive 7½ hp and 10 hp
   Tilting Table 36" x 48"
Inventory Reference R8903-7216
CLICK HERE FOR PHOTO: onsrud pin router, model W-1136, throat depth 36 in, spindle speed 10000 & 20000, spindle drive 5 hp. 480 v. TWO AXIS T-slotted table 28 inch x 33 inch Ser. 8295 Two photo's with-in   This unit just Sold use as example of finished product




 ONSRUD PIN ROUTER Model W240
    24" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 5 hp   
    Table Size 24" x 36"
 Inventory Reference R8903-5339 CLICK HERE FOR QUOTATION onsrud pin router_model W240_throat depth 24 inch_spindle speeds 10000 and 20000_spindle drive 5 hp_tilting table 24 inch x 36 inch



 ONSRUD PIN ROUTER  Model W244E
    24" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 5 hp.
    Tilting Table: 36" x 48" and Tilts 45º down and 15º up
 Inventory Reference R8903-5341 CLICK HERE FOR QUOTATION onsrud pin router_model W244E_throat depth 24 inch_spindle speeds 10000 and 20000_spindle drive 5 hp_ tilting table 24 inch x 36 inch_Ser 6729



 ONSRUD PIN ROUTER  Model W244
    24" throat
    Spindle Speeds 20,000 rpm. (Single Spindle Speed)
    Spindle Drive 5 hp
    Tilting Table: 26½" x 36" and Tilts 45º down and 15º up
 Inventory Reference  R8903-3963 CLICK HERE FOR QUOTATION onsrud pin router model W244_ throat depth 24 inch_ spindle speed 20000 rpm_ spindle drive 5 hp_ tilting table 26.5 inch x 36 inch_spindle travel 3.5 by treadle _Ser 5700
CONTINENTAL PIN ROUTER
    29" throat
    Spindle Speeds 7,200 and 14,400 rpm.
    Spindle drive 5 hp
    Table: 27½" x 29½"
Equipped with:  Leiman Vacuum Pump to attach to parts hold-down chuck.
 Inventory ReferenceR8903-3962 CLICK HERE FOR QUOTATION: continental pin router, throat depth 29 inch, router 5 hp. speed 7200 & 14400 rpm, table 27.5 inch x 29.5 inch, part hold down vacumm pump, Ser. 800-3 and 68774


PIN ROUTERS WITH 2 AXIS TABLES
ONSRUD PIN ROUTER, Model W1136,  36" throat
    Table Two Axis  23" x 33"  Longitudinal  and Cross Feed
    Table Knee with Vertical Adjustment
    Spindle Speeds 10,000 and 20,000 rpm.
    Spindle Drive 5 hp.
 Inventory ReferenceR8903-6752 CLICK HERE FOR QUOTATION: onsrud pin router, model W-1136, throat depth 36 in, spindle speed 10000 & 20000, spindle drive 5 hp. 480 v. TWO AXIS T-slotted table 28 inch x 33 inch Ser. 8295 CLICK HERE FOR PHOTO: onsrud pin router, model W-1136, throat depth 36 in, spindle speed 10000 & 20000, spindle drive 5 hp. 480 v. TWO AXIS T-slotted table 28 inch x 33 inch Ser. 8295



ONSRUD PIN ROUTER  Model W244
    24" throat,
    Table Two Axis  28" x 32"
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 7½ hp
Inventory Reference  R8903-5782

 (Some of the above Pin Routers have Tilting Tables)


HORN PIN ROUTER
ONSRUD HORN PIN ROUTER  Model A1124A
    24" throat  
   Spindle Speeds 10,000 and 20,000 rpm
   Spindle Drive 5 hp.
Inventory Reference  R8903-5345 CLICK HERE FOR QUOTATION onsrud pin horn router_ model A1134A_throat depth 24 inch_ spindle speeds 10000 and 20000_spindle drive 5 hp_ Ser 7983



ONSRUD HORN PIN ROUTER  Model A1124A    Date Mfg'd 2000
    24" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 7½ hp.  and 10 hp
Inventory Reference R8903-9539 CLICK HERE FOR QUOTATION onsrud horn pin router_ model A1124-A_ throat depth 24 inch_drive 10 and 7.5 hp_ 460 volts_ spindle speeds 10000 and 20000 rpm_ Late Frame_Ser 897890-1
ONSRUD HORN PIN ROUTER  Model A1136A
    36" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 7.5 hp and 7.5 hp
Inventory Reference R8903-5343 CLICK HERE FOR QUOTATION: onsrud pin horn router, model A1136, throat depth 24 inch, spindle speeds 10000 and 20000, spindle drive 7.5 hp Ser. 8222


ONSRUD HORN PIN ROUTER Model A1136A   Date Mfg'd 2001
     36" throat
     Spindle Speeds 10,000 and 20,000 rpm
     Spindle Drive 7½ hp  and 10 hp
Inventory Reference  R8903-9537



ONSRUD HORN PIN ROUTER, Model A1136-A
    36" throat
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle Drive 7½ hp. and 10 hp
    Spindle travel by pneumatic cylinder Up and Down
    Table Size 26" x 36"               Inventory Reference   R8903-9713  CLICK HERE FOR QUOTATION onsrud horn pin router_model A1136-A_throat depth 36 inch_spindle 10000 - 20000 rpm_drive 10 - 7.5 hp_volt 460_Late Frame_with standard table_Serial 897897-01
EKSTROM CARLSON PIN ROUTERS (Re-Built): R8903-

 EKSTROM CARLSON PIN ROUTERS  Model 434
    35" throat
    Spindle Speeds10,000 and 20,000 rpm
    Tilting Table 24" x 36"
We have in stock units with 5hp  thru 7½ hp  Spindle drives
 Inventory Reference R8903-5385  CLICK HERE FOR PHOTO ekstrom carlson pin router_model 434_throat depth 34 inch_two spindle speeds 10000 and 20000 rpm_motor drive 7.5 hp_tilting table 24 inch x 36 inch
This item just sold, use as example of finished product.




 PORTER PIN ROUTER  Portermotion  *SPECIAL PRICE $2,500.00*
     Hydraulic Floating Spindle Head
     36" throat depth
    Spindle Speeds 10,000 and 20,000 rpm
    Spindle drive 7.5 hp
    Table Size 40" x 48"
 Inventory Reference R8903-9398

 RADIAL ARM ROUTERS and DRILLS, 
Mfg. by Ekstrom Carlson and Onsrud     R8903-

PLEASE NOTE: The R designates High Routing Spindle Head
                                    D designates High Speed Drilling Head

On this routers below they come equipped with following spindle hp:
           (5 hp 14,700 rpm)    (8 hp 15,000 rpm)    (10 hp 14700 rpm)



ONSRUD RADIAL ARM ROUTERS and DRILLS (Re-Built) R8903-

ONSRUD RADIAL ARM ROUTER  Model A1R   (One Arms)
    Arm Reach 84" centerline of spindle to centerline of column pivot
    Two pivoted section located on arm
    8 hp. Routing Spindle,  spindle speed 14,700 rpm
    Capable of over reaching on table approximate 48" x 72"
 Inventory Reference R8903-1646 CLICK HERE FOR QUOTATION onsrud radial arm router_ model A1R_ single two segment arm_ reach 84 inch cc of spindle to cc of column_ 8 hp_ 14500 rpm routing head CLICK HERE FOR PHOTO: onsrud double arm radial router, model A1ARR




 ONSRUD RADIAL ARM ROUTER  Model A1ARR  (Two Arms)
    each Arm Reach 124" centerline of spindle to centerline of column pivot
    Three pivoted sections located on each arm
    one  5 hp  Router Spindle,  spindle speed 14,700 rpm
    one 10 hp Router Spindle, spindle speed 14,700 rpm
    Capable of over reaching on table, approximate 48" x 144"
 Inventory Reference R8903-5351 CLICK HERE FOR QUOTATION onsrud radial arm routers_ model A1ARR_ two arms each with three segment_reach 124 inch cc of column_ two router spindles 8 hp and 10 hp_14700 rpm each_ Ser 36409



 ONSRUD RADIAL ARM  DRILL   Model A1C    (Two Arms)
    each Arm Reach 84" centerline of spindle to centerline of column pivot.
    Two pivoted sections located on each arm
    two Drilling Heads  two spindle speeds 14,500  and 7430 rpm
    Capable of over reaching on table approximate 48" x 72"
 Inventory Reference R8903-5355 CLICK HERE FOR QUOTATION onsrud radial arm drill_ model A1C_2- two segmented arms_ reach 84 inch cc of column_2- drill spindles each 1.5 hp_ 7300 and 14000 rpm_base ser 6169



 ONSRUD RADIAL ARM ROUTER    Model A2RR   (One Arms)
    each Arm Reach 110" centerline of spindle to centerline of column pivot.
    Two pivoted section located on arm.
    one 8 hp. Router Spindle spindle speed 14,700 rpm
    Capable of over reaching on table approximate 48" x 144"
 Inventory Reference R8903-10756



 ONSRUD RADIAL ARM ROUTER  Model A2RR   (Two Arms)
    each Arm Reach 110" centerline of spindle to centerline of column pivot.
    Two pivoted sections located on each arm.
    one 8 hp  Router Spindle  spindle speed 14,700 rpm
    one  5 hp.  Router Spindle  spindle speed 14,700 rpm
    Capable of over reaching on table approximate 48" x 144"
 Inventory Reference R8903-10987


ONSRUD RADIAL ARM ROUTER and DRILL  Model A2DR   (Two Arms)
    each Arm Reach 124" centerline of spindle to centerline of column pivot
    Three pivoted sections located on each arm
    one 8 hp Router Spindle, spindle speed 14,700 rpm.
    one 1 hp Clausing Drilling Head, variable spindle speed Speed 330 thru 4000 rpm.
    Capable of over reaching on table, approximate 48" x 120"
 Inventory Reference  R8903-6904 CLICK HERE FOR QUOTATION onsrud radial arm router and drill_model A2DR_2 three segmented arms_ arm reach 124 inch cc of column_ 1- router spindles 8 hp_ 14700 rpm_one drilling head_variable speed_ Ser 10338



 ONSRUD RADIAL ARM  DRILL   Model A2DD   (Two Arms)
    each Arm Reach 110" centerline of spindle to centerline of column pivot
    Two pivoted sections located on each arm
    two 1 hp & 1/2 hp Drilling Heads,  two spindle speeds 14,000  and 7300 rpm
    Capable of over reaching on table approximate 48" x 144"
 Inventory Reference R8903-12079



 ONSRUD RADIAL ARM DRILL   Model A2D  (One Arms)
    each Arm Reach 110" centerline of spindle to centerline of column pivot
    Two pivoted sections located on each arm
    one Drilling Heads 1 hp & 1/2 hp two spindle speeds 14,500  and 7430 rpm
    Capable of over reaching on table approximate 48" x 144"
  Inventory Reference R8903-13011

ONSRUD RADIAL ARM ROUTER  Model A4R   (One Arms)
    Arm Reach 124" centerline of spindle to centerline of column pivot
    Three pivoted section located on  arm
    one 8 hp  Router Spindle spindle speed 14,700 rpm.
    Capable of over reaching on table approximate 48" x 144"
 Inventory Reference R8903-5349 CLICK HERE FOR QUOTATION onsrud radial arm router_ model A4R_single arm each with three segments_reach 124 inch cc of spindle to cc of column_5 hp_ 14700 rpm 360 volts_ 250 cycles routing head_ Ser 3848



 ONSRUD RADIAL ARM ROUTER  Model A4AR   (One Arms)
    Arm Reach 124" centerline of spindle to centerline of column pivot.
    Three pivoted section located on  arm.
    one 8 hp Router Spindle, spindle speed 14,700 rpm.
    Capable of over reaching on table, approximate 60" x 168"
 Inventory Reference R8903-11776



 ONSRUD RADIAL ARM ROUTER   Model A4RR   (Two Arms)
    each Arm Reach 124" centerline of spindle to centerline of column pivot
    Three pivoted sections located on each arm
    one  5 hp Router Spindle spindle speed 14,700 rpm
    one 10 hp Router Spindle spindle speed 14700 rpm
    Capable of over reaching on table approximate 48" x 144"
 Inventory Reference  R8903-5354   CLICK HERE FOR QUOTATION onsrud radial arm routers_ model A1ARR_ two arms each with three segment_reach 124 inch cc of column_ two router spindles 8 hp and 10 hp_14700 rpm each_ Ser 36409



 ONSRUD RADIAL ARM  DRILL   Model A4DD   (Two Arms)
    each Arm Reach 124" centerline of spindle to centerline of column pivot
    Three pivoted sections located on each arm
    two Drilling Heads  two spindle speeds 14,500  and 7430 rpm.
    Capable of over reaching on table  approximate 48" x 144"
 Inventory Reference R8903-5698 CLICK HERE FOR QUOTATION onsrud radial arm drill_ model A4DD_ two three segmented arms_ arm reach 124 inch cc of column_ 2- drilling spindles each 1.5 hp_ 7300 and 14000 rpm_ base ser 2491
 Inventory Reference R8903-5699 CLICK HERE FOR QUOTATION onsrud radial arm drill_ model A4DD_ 2- three segmented arms_ reach 124 inch cc of column_ two drill spindles each 1.5 hp_7300 and 14000 rpm_ base ser 00091994

The above Routers are available with 5 thru 10 hp. drives  15,000 rpm.
          Single or Double Arms, Router on both Arms or Combination Router & Drill)



 EKSTROM CARLSON RADIAL ARM ROUTERS and DRILLS
                                         (Re-Built)  R8903-
 EKSTROM CARLSON RADIAL ARM ROUTER, Model V84  (One Arm)
    Arm Reach 84" centerline of spindle to centerline of column pivot.
    Two pivoted section located on arm.
    Spindle Drive Motor 5 hp   Spindle Speed 14,400 rpm
Inventory Reference R8903-1654


  

EKSTROM CARLSON RADIAL ARM ROUTER and DRILL    Model V109  (Two Arm)
    Arm Reach 109" centerline of spindle to centerline of column pivot
    Two pivoted sections located on each arm
    Router Spindle Drive Motor 5 hp., Spindle Speed 14,580 rpm
    Drill Head Spindle Speed Speed 14,500  and 7430 rpm
 Inventory Reference R8903-1655