Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, CATEGORIES ARE IN ALPHABETICAL ORDER.

*SAWS, ABRASIVE & FRICTION*
       COLD & CARBIDE, Manual & Automatic
*SAWS, BAND, Horizontal*
*SAWS, BAND, Tilting Frame (Universal)*
*SAW BAND BEVEL: "New Tannewitz"*
*SAWS, BAND, Vertical*
*SAWS, BAND, Vertical, "New Tannewitz Saws"*

*SAWS, BAND, Vertical, "New Powermatic Saws"*
*SAWS, CUT OFF, Hose or Tubing*
*SAWS, HACK*


"NEW" TANNEWITZ BAND SAWS, 30" thru 52"
 "NEW" POWERMATIC BAND SAWS
 "NEW" POWERMATIC  TABLE SAWS "Available


If you require a Quote Sheet PLEASE  send  us your requirements:
CENTURY MACHINERY COMPANY INC.
 1937 South Santa Fe Avenue
Los Angeles, California 90021

   Website www.centurymachinery.com

Email  sales@centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499

 

SAWS, ABRASIVE & FRICTION
COLD & CARBIDE      Manual & Automatic
Ferrous & Non-Ferrous

CIRCULAR ABRASIVE CHOP SAWS Ref. S0555
▼        ▼           ▼
 BUEHLER LABORATORY ABRASIVE CHOP SAW   Model 1000
CAPACITY 3" diameter and 4" Tube
Blade Diameter 14"
Sliding T-slotted tables 7-9/16" x 12"
   and  two Side tables 6" x 10-3/16"
Motor drive 5 hp.
Coolant Pump   All mounted within Cabinet
 Inventory Reference S0555-9478 CLICK HERE FOR QUOTATION buehler laboratory abrasive chop saw_model 1000_capacity round 3 inch_tuble 4 inch_table 7.5 inch x 12 inch_2-sliding tables_drive 5 hp_Serial 88-A-283
CLICK HERE FOR PHOTO buehler laboratory abrasive chop saw_model 1000_capacity round 3 inch_tuble 4 inch_table 7.5 inch x 12 inch_2-sliding tables_drive 5 hp_Serial 88-A-283_Prior to clean up  Photo of saw taken prior clean-up.




 CIRCULAR COLD & ABRASIVE SAWS Ref. S0805
▼        ▼           ▼
WAGNER CIRCULAR COLD SAW   Model KWL-200
Capacity 3½" diameter
Blade Diameter 12"
Spindle Driven by 10 hp
 Inventory Reference S0805-6827  CLICK HERE FOR QUOTATIO wagner automatic cold saw_model KWL-200_capacity cut round stock 3.5 inch_blade diameter 12 inch_motor drive 10 hp_Ser 25551



WAGNER CIRCULAR COLD SAW,  Automatic Infeed   Model WKA-500
Capacity I-Beam 5" x 12"
Round Stock 5-3/4" diameter
Two Cutting Speeds
Spindle Drive Dual Hp 5 and 10
Equipped with: Automatic Hydraulic Stock Carriage Infinitely Variable,
    Variable Speed Saw Carriage In feed
CLICK HERE FOR PHOTO wagner automatic circular cold saw_model WKA-500_capacity 5.250 inch round_beam upright 5 inch x 12 inch_blade diameter 19.6 inch_2-speed_hp 5 and 10 hp_auto stock feed_Ser 27245 Photo partial front view     Photo End View CLICK HERE FOR PHOTO wagner automatic circular cold saw_model WKA-500_capacity 5.250 inch round_beam upright 5 inch x 12 inch_blade diameter 19.6 inch_2-speed_hp 5 and 10 hp_auto stock feed_Ser 27245_end view
 Inventory ReferenceS0805-6695 CLICK HERE FOR QUOTATION wagner automatic circular cold saw_model WKA-500_capacity 5.250 in round_beam upright 5 inch x 12 inch_ blade 19.6 inch_2-speed_hp 5 and 10 hp_auto stock feed_Ser 27245



 MITER CIRCULAR COLD & ABRASIVE SAWS, Non-Ferrous Ref. S0825
 ▼        ▼           ▼
KALTENBACH AUTOMATIC CIRCULAR MITER COLD SAW   Model SKL-400NA
Saw Blade Diameter 15.75"
Cutting Capacity at 90 degrees,  Round 5.12"     Square 4.72"
                                                         Wide Sections 12.40" x 1.57" thick
Cutting Capacity at ± 45 degrees  Flat Sections 8.66" x 2.36"    Sections on edge 3.15" x 4.72"
Cutting Speeds 6000 or 12000 fpm with 15.75" (400mm) diameter blade
Adjustment cut off length - single stroke 0.39" thru 47.24"
                                             double stroke 0.39" thru 94.49"
Equipped with  Full Automatic  and Manual Stock Feed
    Motor drive 5 / 6 hp
Condition  Excellent Very Low Usage
Inventory Reference S0825-9648  CLICK HERE FOR QUOTATION kaltenbach automatic circular miter cold saw_model SKL-400 NA_capacity 5.250 inch round_square 4.75 inch_wide section 12.40 inch x 1.57 inch thick_ blade 15.75 inch_miter 45 degrees R-L 2-speed_hp 5 & 6_auto stock feed_Ser 108829    CLICK HERE FOR PHOTO kaltenbach automatic circular miter cold saw_model SKL-400 NA_capacity 5.250 inch round_square 4.75 inch_wide section 12.40 inch x 1.57 inch thick_ blade 15.75 inch_miter 45 degrees R-L 2-speed_hp 5 & 6_auto stock feed_Ser 108829  Front View    CLICK HERE FOR PHOTO kaltenbach automatic circular miter cold saw_model SKL-400 NA_capacity 5.250 inch round_square 4.75 inch_wide section 12.40 inch x 1.57 inch thick_ blade 15.75 inch_miter 45 degrees R-L 2-speed_hp 5 & 6_auto stock feed_Ser 108829_R-Rear View  Right Rear View
CLICK HERE FOR PHOTO kaltenbach automatic circular miter cold saw_model SKL-400 NA_capacity 5.250 inch round_square 4.75 inch_wide section 12.40 inch x 1.57 inch thick_ blade 15.75 inch_miter 45 degrees R-L 2-speed_hp 5 & 6_auto stock feed_Ser 108829_Close Up Cutting Area  Close-up Cutting Area      CLICK HERE FOR PHOTO kaltenbach automatic circular miter cold saw_model SKL-400 NA_capacity 5.250 inch round_square 4.75 inch_wide section 12.40 inch x 1.57 inch thick_ blade 15.75 inch_miter 45 degrees R-L 2-speed_hp 5 & 6_auto stock feed_Ser 108829_Close Up Controls  Close-up Operators Controls
 CLICK HERE FOR PHOTO kaltenbach automatic circular miter cold saw_model SKL-400 NA_capacity 5.250 inch round_square 4.75 inch_wide section 12.40 inch x 1.57 inch thick_ blade 15.75 inch_miter 45 degrees R-L 2-speed_hp 5 & 6_auto stock feed_Ser 108829_Rear Gripper Jaws  Rear In-Feed Automatic Part Gripper Jaws




 Two RADIAL ARM SAWS mounted on same base with Part in-feed table between.
▼                   ▼                  ▼                    ▼                   ▼
DEWALT RADIAL ARM SAW DOUBLE MITER CUT OFF
    (two)18" Diameter Blades
 Out Rip 36"
Each Blade is driven by 7½ hp motor.
Distance between saws 103"
 Inventory Reference S1203-4037  CLICK HERE FOR QUOTATION dewalt double radial arm trim saw_with two 18 inch diameter blades_each with 7.5 hp drives_part shuttle in table_arm out rip 36 inch_Ser 6712-12009



DEWALT RADIAL ARM SAW
18" Diameter Blade Capacity
In Rip 14",  Out Rip 28"
Motor drive 7½ hp
 Inventory Reference S1203-8751  CLICK HERE FOR QUOTATION dewalt radial arm saw_capacity blade 18 inch diameter_motor drive 7.5 hp_in- rip 13 inch_out rip 36 inch_Ser 6712-0014



DEWALT RADIAL ARM SAW,    Model 11854
16" Diameter Blade Capacity
In Rip 14"
Out Rip 28"
Motor drive 5 hp
 "Please note this photo shows Radial Arm Saw with Exhaust Unit."
       THIS Exhaust Unit HAS BEEN SOLD. WE DO HAVE ANOTHER SAW IN STOCK  WITHOUT EXHAUST UNIT.



DELTA ROCKWELL RADIAL ARM SAW
16" Diameter Blade Capacity
In Rip 14"
Out Rip 34"
Motor drive 5 hp
Equipped with Dato Blades
 Inventory Reference S1203-9515  CLICK HERE FOR QUOTATION delta rockwell radial arm saw_ blade diameter 16 inch_drive 5 hp. in-rip 6 inch_outrip 36 inch_with dato set_Ser BS8907





 

SAWS, BAND, Horizontal  S0653-

LIKE NEW   6½" x 10" NORTHERN HORIZONTAL BAND SAW, Model STG610
Mfg. Date 04-2005  "Little if any use at all"
Three Blade Speed thru gear box 100, 180, & 235 fpm
Blade Size:¾" wide x 85" long x 0.032" thick
Angle Vise
Equipped with Coolant Pump
   Motor drive1 hp 115 / 230 volts  Single Phase
 Inventory Reference S0653-9503 CLICK HERE FOR QUOTATION northern industrial horizontal band saw_model ST-G610_capacity 6.5 inch x 10 inch_blade speed 100_ 180_ 235 fpm_date mfg. 4-2005_Ser 6000199_never used  CLICK HERE FOR PHOTO northern industrial horizontal band saw_model ST-G610_capacity 6.5 inch x 10 inch_blade speed 100_ 180_ 235 fpm_date mfg. 4-2005_Ser 6000199_never used


12" x 16" DOALL HORIZONTAL BAND SAW,  Model C58   Rebuilt 2006
Saw Blade Variable Speed: 0 thru 350 fpm
Hydraulic Down Feed Down
Drive Motor 3 hp
 Inventory Reference S0653-6530 CLICK HERE FOR QUOTATION doall horizontal band saw_model C58_capacity cut 12 inch x 16 inch_blade width 1.5 inch_blade speed variable thru 350 fpm_auto stock in-feed table_hydraulic vise_vari feed down_3 hp_blade width 1.5 inch_Ser 97-591312



12" x 16" PEERLESS HORIZONTAL BAND SAW,  Model 1200-M
Automatic Shuttle Bar Feed
Saw Blade Variable Speed: 50 thru 350 fpm
Power Down Feed and Hydraulic Stock Clamping   Ref. S0653-5644 CLICK HERE FOR QUOTATION peerless horizontal band saw_model 1200M_capacity cut 12 inch x 16 inch_blade speed variable thru 350 fpm_auto in feed table_hydraulic vise_vari feed down_3 hp_blade width 1.5 inch_Ser AM6-400-66



13" x 13" MARVEL HORIZONTAL BAND SAW   Model 13A / MII /F1010L
Automatic Shuttle Infeed Table
Saw Blade Variable Speed  60 thru 450 fpm.  (19 TO 137 m/min.)
Power Down Feed and Hydraulic Stock Clamping  
Drive Motor 3 hp     Hydraulic Motor 1.5 hp
 Inventory Reference S0653-9511 CLICK HERE FOR QUOTATION marvel horizontal band saw_model 13A-M11-F1010L_cut capacity 13 inch x 13 inch_auto part in feed_hydraulic vise_blade 1 inch_varible blade speed 60 - 450 fpm_hydraulic feed drive_3 hp_Ser D014113W  CLICK HERE FOR PHOTO marvel horizontal band saw_model 13A-M11-F1010L_cut capacity 13 inch x 13 inch_auto part in feed_hydraulic vise_blade 1 inch_varible blade speed 60 - 450 fpm_hydraulic feed drive_3 hp_Ser D014113W



15" x 17" W.F. WELLS HORIZONTAL BAND SAW  Model F15-2
Hydraulic  Blade Tension
Hydraulic  Down Feed
Hydraulic Stock Clamping
Saw Blade Variable Speed  50 thru 300 fpm
Motor Drive 3 hp
 Inventory Reference S0653-7055   CLICK HERE FOR QUOTATION wf wells horizontal band saw_model F15-2_cut capacity 15 inch x 17 inch_blade width 1.250 inch_band speed 50 thru 300 fpm_down feed variable_drive 3 hp_Ser A1248F791373

"THIS SAW HAS BEEN SOLD"
 Please use as example of how we finish our machines.
15" x 17" W.F. WELLS Band Saw, Horizontal   Model F15-1
 CLICK HERE FOR PHOTO wf wells horizontal band saw_model F15-1_capacity cut rectangular 15 inch x 16 inch_variable blade speed 75 - 400 fpm_blade 1.250 inch_blade drive 3 hp_coolant   "What can we say this photo tells it all."



         "BEFORE YOU CONTINUE TO VIEW OUR SITE"
        We at Century Machinery Co. would like to
        THANK YOU FOR VISITING OUR SITE
            "MORE ITEMS LISTING BELOW"







 

SAWS, BAND Tilting Frame, (Universal)   S0690-

TURNER TILTING FRAME BAND SAW
Capacity Throat 42"  x  28½" height
Saw Frame Tilts Back  thru 45° and Down 20°
Saw Blade Variable Speed 89 thru 420 fpm
Vari-Speed Drive 10 hp
 Inventory Reference S0690-5357   CLICK HERE FOR QUOTATION turner tiling frame vertical band saw_throat capacity 36 inch x 18.5 inch height_table size 36.625 inch x 53.75 inch_motor drive 15 hp_Serial SH1862
This photo shows saw before we recondition CLICK HERE FOR PHOTO turner tiling frame vertical band saw_throat capacity 36 inch x 18.5 inch height_table size 36.625 inch x 53.75 inch_motor drive 15 hp_Serial SH1862 



MARVEL UNIVERSAL TILTING FRAME BAND SAW
Series 8,
Capacity Throat 18" x 20" Height
Saw Blade Tilts Left / Right 45º
Saw Blade 3- Speeds: 80, 115, 200 fpm.
Equipped with: Coolant
Inventory Reference S0690-9763 CLICK HERE FOR QUOTATION marvel tilt frame band saw_series 8_capacity 18 inch x 20 inch_saw frame tilts 45 degrees left and right_blade speed 80 - 200 fpm_drive 1 hp_Serial 810610

 


"NEW" TANNEWITZ BEVEL BAND SAW   Model B-11-38
               Angles blade either side of vertical to 45 degrees

For quotes,  Please;
    Call 1-213-627-2847
    Fax  1- 213-627-2499
    or E-mail us at sales@centurymachinery.com



 "THE WAY A MACHINE LOOKS and THE WAY YOU SEE IT,
     MAKES A PERFECT MATCH"




BAND SAWS, VERTICAL    S0690-

20" throat DELTA ROCKWELL VERTICAL BAND SAW
Height under Guide 12½"
Band Saw Blade Speed  Four Speed by step pulley
Table tilts (45° right and 15°left)
Drive Motor 2 hp
 Inventory Reference S0690-9509  CLICK HERE FOR QUOTATION delta rockwell vertical band saw_capacity throat 20 inch_height under guide 12.5 inch_blade speed 4_Serial 125-7623



20" throat DELTA ROCKWELL VERTICAL BAND SAW
Height under Guide 12½"
Band Saw Blade Speed  Infinitely Variable 50 thru 4500 fpm
  thru High / Low Gear Box
Table 24¼" x 24¼"  tilts (45° right and 15°left)
Drive Motor 2 hp
WITH:  Blade Welder & Grinder,  Air Pump
 Inventory Reference S0690-9771 CLICK HERE FOR QUOTATION delta rockwell vertical band saw_capacity throat depth 20 inch_cataloge 88-015_height under guide 12.5 inch_variable blade speed 50-4500 fpm_tilting table 24 inch x 24 inch_air pump_Serial 850561



26" throat DOALL VERTICAL BAND SAW  Model 26-2
Height under Guide 12"
Band Saw Blade, Variable Speed 50 thru 2045 fpm
Table tilts down thru 45°
Motor Drive 3 hp
Equipped  with: Blade Welder & Grinder
 Inventory Reference S0690-8881 CLICK HERE FOR QUOTATION doall vertical band saw_model 26-2_throat depth 26 inch_height under guide 13 inch_band speed 50 thru 2045 fpm_motor drive 3 hp_with blade welder_Ser 54-541-55



THIS ITEM SOLD, use as example of finished product
▼▼
36" throat DOALL VERTICAL BAND SAW  Model  3612-3
Height under guide 12"
Saw Blade Variable Speed: 176 thru 6000 fpm
Power Feed Tilting Table
Table tilts down thru 45°
Motor Drive 3 hp
Equipped with: Blade Welder and Grinder
 Inventory Reference S0690-16664  CLICK HERE FOR PHOTO doall vertical band saw_model 3612-3_capacity 36 inch throat depth x 13 inch height under guide_blade speed variable 56 - 6000 fpm_power feed tilting table 24 inch x 30.5 inch_3 hp_Serial 153-6317_band saw being worked on Band Saw being worked on.
PHOTOS of FINISHED BAND SAW
CLICK HERE FOR PHOTO doall vertical band saw_model 3612-3_capacity 36 inch throat depth x 13 inch height under guide_blade speed variable 56 - 6000 fpm_power feed tilting table 24 inch x 30.5 inch_drive 3 hp Front view    CLICK HERE FOR PHOTO doall vertical band saw_model 3612-3_capacity 36 inch throat depth x 13 inch height under guide_blade speed variable 56 - 6000 fpm_power feed tilting table 24 inch x 30.5 inch_3 hp_Serial 153-6317_wheel guards open View drive wheels.
 CLICK HERE FOR PHOTO doall vertical band saw_model 3612-3_capacity 36 inch throat depth x 13 inch height under guide_blade speed variable 56 - 6000 fpm_power feed tilting table 24 inch x 30.5 inch_3 hp_Serial 153-6317_ rear view  Rear View.      CLICK HERE FOR PHOTO doall vertical band saw_model 3612-3_capacity 36 inch throat depth x 13 inch height under guide_blade speed variable 56 - 6000 fpm_power feed tilting table 24 inch x 30.5 inch_3 hp_Serial 153-6317_ rear view  Rear View with motor drive.



36" throat DOALL VERTICAL BAND SAW,  Friction Saw, ZEPHER , Model 36-WM
Height under guide 21"
Saw Blade Speed, Infinitely Variable: 70 -15,000 fpm.
Table Tilts down thru 45°
Motor Drive 10 hp.
Equipped with: Blade Welder and Grinder
 Inventory Reference S0690-6526  CLICK HERE FOR QUOTATION doAll vertical band saw_type zepher_model 36-W-M_throat depth 36 inch_height under guide 21 inch_blade speed variable 70 - 15000 fpm_tilting table 30 inch x 36 inch_motor drive 10 hp_with blade weld
 CLICK HERE FOR PHOTO doAll vertical band_type zepher_model 36-W-M_throat 36 inch_height under guide 21 inch_blade speed variable 70 - 15000 fpm_tilting table 30 inch x 36 inch_Front view  CLICK HERE FOR PHOTO doAll vertical band_type zepher_model 36-W-M_throat 36 inch_height under guide 21 inch_blade speed variable 70 - 15000 fpm_tilting table 30 inch x 36 inch_Rear view

 

THIS BAND SAW HAS POWER FEED TABLE
▼                 ▼
 36" throat DOALL VERTICAL BAND PLATE SAW  Model 36-HP
Height under guide 15"
Variable Blade Speed 40 thru 10,800 fpm
    Thru 3 speed gear box
Table Size 36" x 44" Hydraulic Power Driven
Motor Drive 20 hp
Equipped with Blade Welder and Grinder 
     
"THIS SAW IS IN VERY GOOD TO EXCELLENT RUNNING CONDITION"
 CLICK HERE FOR PHOTO doAll vertical plate band saw_model 36HP_zepher_throat capacity 36 inch_height under upper guide 15 inch_band speed 40 - 10800 fpm_moving bed 36 inch x 44 inch_drive 15 hp_Ser 31-51538_BEFORE PAINT Photo show unit before we paint.   View under table. CLICK HERE FOR PHOTO doAll vertical plate band saw_model 36HP_zepher_throat capacity 36 inch_height under upper guide 15 inch_band speed 40 - 10800 fpm_moving bed 36 inch x 44 inch_drive 15 hp_Ser 31-51538_view top of table
CLICK HERE FOR PHOTO doAll vertical plate band saw_model 36HP_zepher_throat capacity 36 inch_height under upper guide 15 inch_band speed 40 - 10800 fpm_moving bed 36 inch x 44 inch_drive 15 hp_Ser 31-51538_view under table View showing blade track
 Inventory Reference S1170-8882  CLICK HERE FOR QUOTATION doAll vertical plate band saw_model 36HP_zepher_throat capacity 36 inch_height under upper guide 15 inch_band speed 40 - 10800 fpm_moving bed 36 inch x 44 inch_drive 15 hp_Ser 31-51538
PLEASE CHECK OUT  Other Vertical Band Saw as example of finished product



Check this one out:
▼                          ▼
 36"  throat TANNEWITZ VERTICAL BAND SAW  Model GH    *Rebuilt*
    Height under guide 20"              
    Table tilts down thru 45°          Drive Motor 5 hp
 Inventory Reference S0690-6605   "These four photos show rebuilding from start to finish.  CLICK HERE FOR PHOTO tannewitz vertical band saw_model GH_throat depth 36 inch_being rebuilt for Lockheed


36" throat TANNEWITZ VERTICAL BAND SAW   Model 36-MS, 
Die Cutting Saw
3-wheel
Height under guide 13"
Variable Blade Speed thru 3-speed transmission: 35 thru 6400 fpm
Table Tilts: Down thru 45° and 5º Upº      Back 15º
Table 36" x 40" and Tilts 3-directions
Motor drive 3 hp.
Equipped with Blade Welder 
 Inventory Reference S0690-7215  CLICK HERE FOR QUOTATION tannewitz die makers vertical band saw_model 36MS_ throat capacity 36 inch_height under guide 13 inch_table tilts 3 directions_blade speed 35 - 6400 fpm_drive 3 hp_with blade welder_Ser 13947



 36"  throat TANNEWITZ VERTICAL BAND SAW   Model GV-1   
                               "To be Rebuilt to order"
Height under guide 20"
Variable Band Speed: 2,000 thru 12,000 fpm
 36" x 37" Main Table, tilts down thru 45°
10 hp Vari Speed Drive Motor
Inventory ReferenceS0690-8760  CLICK HERE FOR QUOTATION tannewitz vertical band saw_model GV-1_capacity 36 inch throat_height under guide 20 inch_vari blade speed drive 10 hp_tilting table 36 inch x 37 inch_Ser 10908

 

JUST REBUILT, and SOLD use as example of our finish that you can expect.
36" throat TANNEWITZ  VERTICAL BAND SAW
Blade Speeds thru 5 -Speed Transmission.
Height under Upper Guide Post 31"
Main Table 36" x 37"
Auxiliary Table 16⅝" x 19⅝"
7½ hp. Motor (Belted) to Band Speed Transmission
 Inventory Reference S0690-9584  CLICK HERE FOR QUOTATION tannewitz vertical band saw_throat depth 36 inch_height under guide 31 inch_ five blade speeds thru 5 speed transmissions driven by 7.5 hp_table 36 inch x 37 inch_Ser 6214     CLICK HERE FOR PHOTO tannewitz vertical band saw_throat depth 36 inch_height under guide 31 inch_ five blade speeds thru 5 speed transmissions driven by 7.5 hp_table 36 inch x 37 inch_Ser 6214   CLICK HERE FOR PHOTO tannewitz vertical band saw_throat depth 36 inch_height under guide 31 inch_ five blade speeds thru 5 speed transmissions driven by 7.5 hp_table 36 inch x 37 inch_Ser 6214  CLICK HERE FOR PHOTO tannewitz vertical band saw_throat depth 36 inch_height under guide 31 inch_ five blade speeds thru 5 speed transmissions driven by 7.5 hp_table 36 inch x 37 inch_Ser 6214  CLICK HERE FOR PHOTO tannewitz vertical band saw_throat depth 36 inch_height under guide 31 inch_ five blade speeds thru 5 speed transmissions driven by 7.5 hp_table 36 inch x 37 inch_Ser 6214  CLICK HERE FOR PHOTO tannewitz vertical band saw_throat depth 36 inch_height under guide 31 inch_ five blade speeds thru 5 speed transmissions driven by 7.5 hp_table 36 inch x 37 inch_Ser 6214_Rear View Transmission  CLICK HERE FOR PHOTO tannewitz vertical band saw_throat depth 36 inch_height under guide 31 inch_ five blade speeds thru 5 speed transmissions driven by 7.5 hp_table 36 inch x 37 inch_Ser 6214_Band Speed Shifting Chart  CLICK HERE FOR PHOTO tannewitz vertical band saw_throat depth 36 inch_height under guide 31 inch_ five blade speeds thru 5 speed transmissions driven by 7.5 hp_table 36 inch x 37 inch_Ser 6214_Close up point of operation blade Guard
 

42"  throat TANNEWITZ VERTICAL BAND SAW   Model R-IS  
Height under guide 21"
You may order this saw with:
(OPTION 1)  with 5 hp Single Speed Drive Motor..................Band Speed 5000 fpm
 (OPTION 2)  with 10 hp Variable Drive Motor...............Band Speed: 1000 thru 10500 fpm
 36" x 37" Main Table, tilts down thru 45°
 Inventory ReferenceS0690-9686 CLICK HERE FOR QUOTATION tannewitz vertical band saw_model RHE_capacity throat 42 inch_height under upper guide 21 inch_with 5 hp single speed drive or 10 hp vari speed drive_tilting table 38 inch x 36_Serial 13300




 WANT NEW AT A USED PRICE?
▼▼     ▼▼ 
42" throat TANNEWITZ VERTICAL BAND SAW  Model RHE    Mfg. 1992
Height under guide 22"
 Table 38" x 36",  tilts down thru 45°
Motor direct drive 7½ hp
Equipped with: Rip Fence and Mitre Gage   
 THIS BAND SAW WAS IN LONG TERM STORAGE and CONDITION IS LIKE NEW
Still mounted on factory skid.
 Inventory Reference S0690-9638  CLICK HERE FOR QUOTATION tannewitz vertical band saw_model RHE_ capacity throat 42 inch_height under upper guide 22 inch_ direct drive 7.5 hp_tilting table 38 inch x 36 inch_rip fence_ mitre gage_date Mfg 1992_Ser.92013     CLICK HERE FOR PHOTO tannewitz vertical band saw_model RHE_capacity throat 42 inch_height under upper guide 22 inch_direct drive 7.5 hp_tilting table 38 inch x 36_rip fence_mitre gage_date Mfg 1992_Serial 92013   CLICK HERE FOR PHOTO tannewitz vertical band saw_model RHE_capacity throat 42 inch_height under upper guide 22 inch_direct drive 7.5 hp_tilting table 38 inch x 36_rip fence_mitre gage_date Mfg 1992_Serial 92013  CLICK HERE FOR PHOTO tannewitz vertical band saw_model RHE_capacity throat 42 inch_height under upper guide 22 inch_direct drive 7.5 hp_tilting table 38 inch x 36_rip fence_mitre gage_date Mfg 1992_Serial 92013_ View Bottom



We now can offer "NEW" TANNEWITZ BAND SAWS:

* NEW* Tannewitz Vertical Band Saws: (Metal Working and Woodworking)
        Throat Depth 30" thru 52"
        Single or Variable Blade Speed     5 thru 15 hp
    
*NEW* Tannewitz Band Saws: Equipped with Automatic Curve Cutter.
               
 *NEW* Tannewitz Plate Saws: Band Type.
    
 *NEW* Tannewitz Moving Head Plate Saws with Auto Indexing.
    
 *NEW*  Tannewitz Bevel Band Saws,  Model B-11-38"
"NEW"   POWERMATIC SAWS:

 Powermatic Band Saws 12" thru 20" throat.
Powermatic Table Saws 10" thru 14" Blade.

 "NEW" Jet  BAND and TABLE SAWS
We also carry full line of Jet Dust Collectors


E-MAIL US YOUR CURRENT OR FUTURE NEEDS  at
     sales@centurymachinery.com

SAWS, HACK  S0948-

RACINE HACK SAW   Model 33-C
Capacity 12" x 16"
Stroke per minute  60 - 90 &130
Swivel Vise 13" x 10"
Hydraulic Down Feed and Vise Operation
Motor drive 3 hp. motor  to Hydraulic Pump
Equipped with: Coolant Pump
 Inventory Reference S0948-7152


 

SAWS, MISCELLANEOUS

  AERO QUIP HOSE CUT OFF SAW,
    Capacity Hose 4 thru 40
    Blade diameter 14"
 Inventory Reference C8006-6701



 DUST COLLECTORS

 REESE SELF CONTAINED DUST COLLECTOR
Model 5.4-60
Hopper Type
Exhaust Cubic Feet Per Minute 1100 cfm
Filter Medium Cloth Bags
Motor drive 3/4 hp 230/460 volts
 Inventory Reference D8300-9536 CLICK HERE FOR QUOTATION reese dust collector_model 5-4-60_self contained_cubic feet per minute 1100 cfm_filter medium cloth bages_ inlet opening 3 inch_drive 0.75 hp_Ser 11478-1
 

"NEW"  DUST COLLECTORS Available

 

THIS IS JUST A SMALL SELECTION OF OUR BAND SAWS
*PLEASE SEND US YOUR CUTTING REQUIREMENTS*

Phone 1- 213-627-2847     Fax  1-213-627-2499     or
 E-Mail us at   sales@centurymachinery.com
"THANK YOU for taking the time to visit our web site"