THREAD ROLLING MACHINES
Link back to Home Page► www.centurymachinery.com


If you require a Quote Sheet PLEASE  send  us your requirements:
 CENTURY MACHINERY COMPANY INC.
1937 South Santa Fe Avenue
Los Angeles, California 90021
Email sales@centurymachinery.com

Website  www.centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499
 

  BOLT THREADER T2604-

OSTER WILLIAMS SINGLE SPINDLE THREADING MACHINE
Model 922SSB
CAPACITY
   Bolt Diameter (Range)  1/2" thru 2"
   Pipe Size (Range 1/4" thru 2"
Thread Length (Maximum) 24"
Coarsest Thread Length  4½ Threads Per Inch
SPINDLE THRU HOLE, Diameter 3-7/16”
EQUIPPED WITH:
   1-LANDIS LANCO THREADER HEAD, R-Type, Number 16R2293.
          with 4 adjustable NF Chaser Holders and Tangential Chasers.
   1- extra set Chaser Holders, 1” 6P.
Inventory Reference T2604-9588  CLICK HERE FOR QUOTATION oster williams bolt and pipe threader_model 922-SSB_single spindle_landis lanco threading head_capacity bolt 0.50 inch thru 2 inch_ pipe 0.250 inch thru 2 inch_Ser C-J-2
 CLICK HERE FOR PHOTO oster williams bolt - pipe threader_model 922-S.S.B_landis lanco threading head_capacity 2 inch_Front to right end Front to Right end.     CLICK HERE FOR PHOTO oster williams bolt - pipe threader_model 922-S.S.B_landis lanco threading head, capacity 2 inch_Close up Landis LancoThreading Head Type R with 4 adjustable NF chasers Close-up Die Head.
 CLICK HERE FOR PHOTO oster williams bolt - pipe threader_model 922-S.S.B_landis lanco threading head_capacity 2 inch_Close up Landis LancoThreading Head Type R with 4 adjustable NF chasers Close-up Die Head.     CLICK HERE FOR PHOTO oster williams bolt - pipe threader_model 922-S.S.B_landis lanco threading head_capacity 2 inch_Close up Gripper Carriage and jaws Gripper Carriage & Jaws.
  CLICK HERE FOR PHOTO oster williams bolt - pipe threader_model 922-S.S.B_landis lanco threading head_capacity 2 inch_Left to front view Left Side to Front.     CLICK HERE FOR PHOTO oster williams bolt - pipe threader_model 922-S.S.B_landis lanco threading head_capacity 2 inch_Left end view Left End View.
 CLICK HERE FOR PHOTO oster williams bolt - pipe threader_model 922-S.S.B_landis lanco threading head_capacity 2 inch_Left end view Right End to Rear View.      CLICK HERE FOR PHOTO oster williams bolt - pipe threader_model 922-S.S.B_landis lanco threading head_capacity 2 inch_Extra Set of Chaser Holder Extra Chaser Holders.   



 

  PIPE THREADER T2520-

OSTER PIPE and BOLT THREADER
Model 562-C,   Type REVOLVING CHUCK
CAPACITY
     Standard Range of Pipe ¼" to 2"
     Range of Bolt National Coarse or Whitworth ¼" to 1¼"
     Range of Bolt National Fine or B.S.F ¼" to 1½"
     Shortest nipple threaded both ends without chuck 2"
         Other sizes in proportion 3½"
    Travel of Die Head 10⅝"
MOTOR DRIVE: ½ H.P  115 volts, 1-Phase*
EQUIPPED WITH:
     Dies Sets (1) ¼" & ⅜"   (1) ½” & ¾"
     (1) Reamer.      (1) Chamfer Tool.
     (1) Coolant Pump
     Unit mounted on wheels.
Inventory Reference T2805-9582  CLICK HERE FOR QUOTATION oster pipe threader_model 562-C_capacity pipe 0.250 inch - 2 inch_bolt 0.250 inch - 1.5 inch_revolving chuck_Serial FF68





 

  THREAD ROLLER T2520-


WATERBURY THREAD ROLLER
Size 20   Inclined
Capacity
    Thread Diameter  3/8"
    Thread Length 3"
Die Face Depth 3⅛"
Standard Depth of Die Face 1½"
 Inventory ReferenceT2520-9486  CLICK HERE FOR QUOTATION waterbury thread roller_size 20_capacity flat die 0.375 inch diameter x 3 inch length_60 strokes per minute_Serial 123711-1030         
CLICK HERE FOR PHOTO waterbury thread roller_size 20_capacity flat die 0.375 inch diameter x 3 inch length_60 strokes per minute_Serial 123711-1030  Front to right side view.       CLICK HERE FOR PHOTO waterbury thread roller_size 20_capacity flat die 0.375 inch diameter x 3 inch length_60 strokes per minute_Serial 123711-1030_ Front View Front view.
 CLICK HERE FOR PHOTO waterbury thread roller_size 20_capacity flat die 0.375 inch diameter x 3 inch length_60 strokes per minute_Serial 123711-1030_Side View  Right side view.          CLICK HERE FOR PHOTO waterbury thread roller_size 20_capacity flat die 0.375 inch diameter x 3 inch length_60 strokes per minute_Serial 123711-1030_ Rear view Rear view.
 

IF YOU DON’T SEE IT ??
*PLEASE*
 CALL   1-213-627-2847
FAX  213-627-2499 or
E-mail us at   sales@centurymachinery.com

  

TOP $$$ PAID for
ONE MACHINE or ENTIRE PLANT
" THANK YOU for taking the time to visit our Web Site "