TOOLING

Link back to Home Page► www.centurymachinery.com

*ANGLE PLATES*
*
ANGLE PLATES: Universal*
*
BORING BAR, HORIZONTAL: ACCESSORIES*
*
DIVIDING HEADS*
*
DRILL BITS FOR SALE*

*
FACING HEAD*
*
MILLERS: TOOLING*
*SUPER SPACER*
*SURFACE PLATES: Granite "NEW"*
*
SURFACE PLATES: Used*
*
TABLE, Angle Measuring*

*TABLES, ROTARY: Tilting & Non Tilting*
*TOOLING for Engine & Turret Lathes*
*
TRACING ATTACHMENT for Lathe*

*
VISES: All Type*
*
WEIGHT MEASURING UNIT*


SPECIAL 78 year in business discounted price on all items listed below "CALL".
 

If you require a Quote Sheet PLEASE  send  us your requirements:
CENTURY MACHINERY COMPANY INC.
1937 South Santa Fe Avenue
Los Angeles, California 90021

Email  sales@centurymachinery.com
Website  www.centurymachinery.com
Telephone 1-213-627-2847
 Fax 1-213-627-2499

* IF YOU DON'T SEE IT ??   PLEASE CALL*

These photo's show one section of our tooling  cribs.
         
Photo Over view of one section.         Photo Lathe Tooling
            If you don't see it??     Please contact us.


ANGLE PLATES  T3953-

1-set Challenger Angle Plate 10" x 12" by 8" x 12   For set $89.95
Inventory Reference T3953-6951


1-set Shamrock Angle Plate, 6-1/8" x 5" by 4-1/16" x 5",   For set $35.00
Inventory Reference T3953-6953


1-set Shamrock Angle Plate  6" x 5" by 4" x 5"   For set $48.95
Inventory Reference T3953-6952



WE WILL BE ADDING MORE ITEMS TO THIS SECTION.
For quotes,  Please
    Call 1-213-627-2847
    Fax  1- 213-627-2499
    E-mail us at
  
sales@centurymachinery.com






ANGLE PLATE: Universal  T3953-

WE WILL BE ADDING MORE ITEMS TO THIS SECTION.
        PLEASE CHECK AT A LATER DATE:
For quotes
Please;
  
 Call   1-213-627-2847
    Fax:  1- 213-627-2499

    E-mail us at sales@centurymachinery.com









BORING BAR, HORIZONTAL:
ACCESSORIES  
T3953-

GIDDINGS and LEWIS HORIZONTAL  BORING MILL OUT-BOARD SUPPORT
For M-300T Table Type Bar.
4" diameter bar
Capacity Vertical Height 36"
Our price to you just $8,500.00   
Inventory Reference T3953-9559 CLICK HERE FOR QUOTATION  giddings and lewis out board support for horizontal boring mill_4 inch bar diameter_vertical travel 36 inch_for model M-300T_table type boring mill  CLICK HERE FOR PHOTO  giddings and lewis out board support for horizontal boring mill_4 inch bar diameter_vertical travel 36 inch_for model M-300T_table type boring mill Photo



LUCAS HORIZONTAL
BORING MILL OUT-BOARD SUPPORT
For 44B-48 Table Type Bar
4" diameter bar
Capacity  Vertical Height 39"
Our price to you just $12,000.00
 
Inventory ReferenceT3953-5846 CLICK HERE FOR QUOTATION: lucas out board support for horizontal boring mill, 4 inch bar diameter, vertical travel 39 inch, for model 441B-48, table type boring mill,  ID 41B2608-1A



LUCAS HORIZONTAL BORING MILL  OUT-BOARD SUPPORT
For Table Type Bar
4" diameter bar
Capacity Vertical Height 49¼"
Our price to you just $8,500.00
Inventory Reference T3953-7205 CLICK HERE FOR QUOTATION: lucas out board support for horizontal boring mill, 4 inch bar diameter, vertical travel 49.2 5 inch,  for table type boring mill,  ID 476-7-91



LUCAS HORIZONTAL
BORING MILL  OUT-BOARD SUPPORT
For 542B-60 Table Type Bar

5" diameter bar
Capacity  Vertical Height 60"
Our price to you just $12,000.00
Inventory ReferenceT3953-8709 CLICK HERE FOR QUOTATION: lucas out board support for horizontal boring mill, 5 inch bar diameter, vertical travel  60 inch,  for model 542B-60, table type boring mill,  ID 542B60-148

 

BULLARD BORING MILL VERTICAL MILLING HEAD
Ref. T3953-3876 CLICK HERE FOR QUOTATION bullard  boring mill vertical head_spindle taper 50 mt_swivel base_overall length base to center of spindle 35 inch_Serial A27575 CLICK HERE FOR PHOTO  bullard  boring mill vertical head_spindle taper 50 mt_swivel base_overall length base to center of spindle 35 inch_Serial A27575
Photo





 

DIVIDING HEADS  T3953-

NEW*  4.3307" diameter DIVIDING HEAD, TILTING CHUCK 
Three Jaws, Scroll type adjustment
Chuck Rotation 360
° by worm gear to hand knob
Tilts 90º horizontal to vertical position
Over-all height 3.5 inch
Inventory Reference T3954-4365-J  CLICK HERE FOR QUOTATION: NEW_universal tilting rotary dividing head with 4.3307 inch diameter chuck_three jaws_jaws adjust by scroll_chuck rotates 360 degrees and tilts thru 90 degrees_overall height 3.5 inch_Serial 000497   CLICK HERE FOR PHOTO: NEW precision dividing head_universal tilting rotary chuck_diameter chuck 4.3307 inch_3 adjustable jaws_chuck rotation 360 degrees_tilts thru 90 degrees_overall height 3.5 inch_Serial 000468 Photo
WEBSITE DISCOUNTED PRICE $289.95 



VAN NORMAN DIVIDING HEAD
Direction set in horizontal plain
Swing 10½"
Spindle thru hole1-1/6"
Base swivel 360°
with Collet Chuck
LIST PRICE $700.00  WEBSITE PRICE $289.95
OPTION TAILSTOCK $148.95
I
nventory Reference T3953-9874 CLICK HERE FOR QUOTATION: van norman dividing head_horizontal direction_set height_10.5 inch swing_spindle thru hole 1.0625 inch_taper collet nose_Serial 2399  CLICK HERE FOR PHOTO: van norman dividing head_horizontal direction_set height_10.5 inch swing_spindle thru hole 1.0625 inch_taper collet nose_Serial 2399 Photo Spindle Collet.
CLICK HERE FOR PHOTO: van norman dividing head_horizontal direction_set height_10.5 inch swing_spindle thru hole 1.0625 inch_taper collet nose_Serial 2399 
Photo Spindle right side view.    CLICK HERE FOR PHOTO: van norman dividing head_horizontal direction_set height_10.5 inch swing_spindle thru hole 1.0625 inch_taper collet nose_Serial 2399 Photo Spindle rear view.     CLICK HERE FOR PHOTO: van norman dividing head_horizontal direction_set height_10.5 inch swing_spindle thru hole 1.0625 inch_taper collet nose_Serial 2399_Down view Photo Down view.



BROWN and SHARPE DIVIDING HEAD
Swing 10"
Tilts 10° Below Horizontal & 5° Beyond Vertical
with 7" diameter Three Jaw Chuck
        Tail Stock with Height adjustment and pivot
        1- Dividing Plate
LIST PRICE $1,850.00 WEBSITE PRICE $789.00
I
nventory Reference T3953-9111 CLICK HERE FOR QUOTATION: brown and sharpe dividing head_size 10 inch swing_with 7 inch three jaws chuck_thru hole in chuck 1.0625 inch_tilt 10 degrees below and 5 degrees beyond vertical_Ser 3939  CLICK HERE FOR PHOTO: brown and sharpe dividing head_size 10 inch swing_with 7 inch three jaws chuck_thru hole in chuck 1 inch_tilt 10 degrees below and 5 degrees beyond vertical_Serial 3939 Photo



DIVIDING HEAD
Swing 12"
Tilts 10° Below Horizontal & 5° Beyond Vertical
with Chuck 6" diameter Three reversible top jaws.
1- Dividing Plate  and 1-Foot Stock
LIST PRICE $1,250.00  DISCOUNTED PRICE $689.00
Inventory Reference T3953-4367 CLICK HERE FOR QUOTATION: dividing head_chuck 6.25 inch 3-jaw_12 inch swing_tiltl 10 degrees below horizontal - 90 degree vertical_with tail stock_1.3125 inch hole_Chuck Serial 1010406000C   CLICK HERE FOR PHOTO: dividing head_chuck 6.25 inch 3-jaw_12 inch swing_tiltl 10 degrees below horizontal - 90 degree vertical_with tail stock_1.3125 inch hole Photo





 

DRILL BITS FOR SALE

  We purchase a ton of  New COBALT DRILLS,
    1/16" thru 3/4" diameter. Made in USA   Save Up to 60% off  New List Price.









FACING HEAD






 

MILLERS, TOOLING

(1) New GEM POWER RIGHT ANGLE MILLING HEAD for BRIDGEPORT   CLICK HERE FOR PHOTO gem power horizontall MILLING HEAD_spindle R8 collet_fits bridgeport style vertical mill_Serial NOT KNOWN View Down.
           CLICK HERE FOR PHOTO gem power horizontall MILLING HEAD_spindle R8 collet_fits bridgeport style vertical mill_Serial NOT KNOWN_View toward spindle 
Photo View toward spindle.     CLICK HERE FOR PHOTO gem power horizontall MILLING HEAD_spindle R8 collet_fits bridgeport style vertical mill_Serial NOT KNOWN_View Draw Bar  Photo View Draw Bar.    CLICK HERE FOR PHOTO gem power horizontall MILLING HEAD_spindle R8 collet_fits bridgeport style vertical mill_Serial NOT KNOWN_Mount End Photo Mount End.
      
Equipped with: Miscellaneous R-8 Collets, Inventory Reference T3953-9844

 WEBSITE DISCOUNTED PRICE $289.00


(1) BORING HEAD
2" dia. Tool Capacity 1/2" with R-8 adapter Inventory Reference T3953-9846 $150.00



HORIZONTAL & VERTICAL COLLET FIXTURE

1- P.H.Y. Horizontal and Vertical 5-C Collet Fixture
    Collet Capacity 1/8" thru 1⅛"
Equipped with 1- 5C Collet

WEBSITE PRICE $38.95
Inventory Reference T3953-9619 CLICK HERE FOR QUOTATION: P.Y.H vertical and horizontal collet fixture_model T5CA_can be used in either direction_recieves 5C collet  CLICK HERE FOR PHOTO  P.Y.H vertical and horizontal collet fixture_model T5CA_can be used in either direction_recieves 5C collet Photo

1- JFK Horizontal and Vertical 5-C Collet Fixture
     Model C100
     Collet Capacity 1/8" thru 1⅛"

 
Equipped with 1-5C Collet
 WEBSITE PRICE $38.95
Inventory Reference T3953-9620  CLICK HERE FOR QUOTATION   JFK vertical and horizontal collet fixture_model C100_can be used in either direction_recieves 5C collet_Cast ID 1002  CLICK HERE FOR PHOTO  JFK vertical and horizontal collet fixture_model C100_can be used in either direction_recieves 5C collet_Cast ID 1002 Photo


 

1- AIR CHUCK VERTICAL COLLET FIXTURE
    
Model CAF-25
UNIT CAN BE USED IN EITHER A VERTICAL OR HORIZONTAL POSITION
CAPACITY COLLET           1/16” thru 1⅛”
HOLDS, COLLET  5 C
       Built in pneumatic cylinder opens and closes collet holder.
Equipped with:1- 5C Collet 29/32
WEBSITE PRICE $89.50
Inventory Reference T3953-9621  CLICK HERE FOR QUOTATION   air collet chuck fixture_model CAF-25_pheumatic collet closer_can be used in either direction_recieves 5C colle  CLICK HERE FOR PHOTO  air collet chuck fixture_model CAF-25_pheumatic collet closer_can be used in either direction_recieves 5C collet Photo

 


MILLING HEADS All Angle & Vertical:

NICHOLS VERTICAL MILLING HEAD
Spindle Taper 40 MT
Equipped with: 1- End Mill Tool Holder

Inventory Reference T3953-9877  CLICK HERE FOR QUOTATION  nichols vertical milling head_taper spindle 40 MT_with one end mill holder_Serial 0350 CLICK HERE FOR PHOTO  nichols vertical milling head_taper spindle 40 MT_with one end mill holder_Serial 0350 Photo


CINCINNATI VERTICAL MILLING HEAD
        
For 2 Size Mill
FIXED QUILL
TAPER 50 MT
SWIVEL BASE: One (Graduated)
     Can be set to any angle through 360 degrees in a single vertical
             plane parallel to table travel. Or parallel to face of machine column.
EQUIPPED WITH:
        1-Draw Bar.
 
1- Drive Gear
Inventory Reference T3953-3865 
CLICK HERE FOR QUOTATION  cincinnati vertical milling head_size 2_fixed spindle_taper 2_single swivel joint_Serial AHR1P5


2- In-stock
KEARNEY & TRECKER UNIVERSAL VERTICAL MILLING HEAD
         For 2CH Mill
TAPER  50 MT
SWIVEL BASE: Two (Both graduated)
     At 90 degrees to each other.  Both can be set to any angle thru
           360 degrees to mill at a simple and compound angles.
EQUIPPED WITH:
    
1-Drive Gear     1-Draw Bar
Inventory Reference T3953-3866 
CLICK HERE FOR QUOTATION  kearney and trecker universal milling head_for model 2CH_spindle taper 50 mt_2-swivel base graduated 90 degrees to each other both can be set to any angle thru 360 degrees_simple and compound angles_fits 2CH horizontal mill_Serial 9-4766-20-4769      T3953-3902  CLICK HERE FOR QUOTATION  kearney and trecker universal milling head_for model 2CH_spindle taper 50 mt_2-swivel base graduated 90 degrees to each other both can be set to any angle thru 360 degrees_simple and compound angles_ fits 2CH mill_Serial 9-4766-20-4899


KEARNEY & TRECKER VERTICAL MILLING HEAD
            For 3 Size Mill
SPECIFICATIONS
FIXED QUILL
TAPER 50 MT
SWIVEL BASE: One (Graduated)
        Can be set to any angle through 360 degrees in a single vertical
             plane parallel to table travel. Or parallel to face of machine column.
EQUIPPED WITH:  1-Drive Gear.  1-Draw Bar
Inventory Reference T3953-6503
CLICK HERE FOR QUOTATION  kearney and trecker vertical milling machine head_fits mill size 3_fixed quill_swivels 360 degrees_spindle taper 50mt_Serial 2-6091


KEARNEY & TRECKER VERTICAL MILLING HEAD

        For 4 Size Mill
SPECIFICATIONS:
FIXED QUILL
TAPER 50 MT
SWIVEL BASE: One (Graduated)
        Can be set to any angle through 360 degrees in a single vertical
             plane parallel to table travel. Or parallel to face of machine column.
WIDTH OF MOUNTING BASE SURFACE:
        Between V-clamp 14"
EQUIPPED WITH:
        1-Draw Bar.
  
1- Drive Gear
Inventory Reference T3953-6502
CLICK HERE FOR QUOTATION  kearney and trecker vertical milling head_single swivel joint_spindle taper 50 MT_fits 4 size mill_base width 14 inch_Serial 8-6881


KEARNEY & TRECKER UNIVERSAL VERTICAL MILLING HEAD

       For 6 Mill
SPECIFICATIONS:
HEAVY DUTY
TAPER 50 MT
SWIVEL BASES: Two (Both graduated)
        At 90 degrees to each other.  Both can be set to any angle through
           360 degrees to mill at a simple and compound angles.
WIDTH OF MOUNTING SURFACE:
        Between V-Clamp 16½"
EQUIPPED WITH: 
1-Drive Gear.   Draw Bar
Inventory Reference T3953-5493 CLICK HERE FOR QUOTATION  kearney and trecker universal vertical milling head_taper spindle 50 MT_for number 5 mill_ Serial 6-5128




LARGE SELECTIONS: Arbors,  BORING HEADS,  ETC.

Please tell us what you require:
    Call  1-213-627-2847
    Fax   1- 213-627-2499
    E-mail us at sales@centurymachinery.com

 

 


SURFACE PLATES: Granite "NEW"

New STANDRIDGE SURFACE PLATES:
 Angle-Plates -  Parallels in pair -  Straight-Edges -  Precision Square

PLEASE ANSWER THESE QUESTIONS
    What type of stone do you require:
Black Granite, Pink Granite or ?
    Grade Required: 
Laboratory AA,   Inspection A,  or   Shop B
   
Size: Front to Back x Thickness
         
With or Without Ledge: (O-Ledge, 2-Ledge, 4-Ledge)
    Stand: 
(With or With-out)

 E-Mail us your requirements at
sales@centurymachinery.com







SURFACE PLATES: Steel (Used)

LAPPING PLATE (Small)   Diameter 7½"
   
Height 2½ " with Cross checkering
Our price to you just $25.00    Inventory Reference T3953-9109  CLICK HERE FOR PHOTO: lapping plate 7.5 inch diameter x 2.5 inch height, with cross checkering Photo



We will be adding items to this list. PLEASE CHECK AT A LATER DATE
    or Email us your current needs.
  sales@centurymachinery.com





SUPER SPACER




 

 TABLE, Angle Measuring




 

TABLES, ROTARY, Tilting & None Tilting


Please Note:  INDEXING TABLES below last Rotary Table     Scroll Down

NEW*  4.3307" diameter DIVIDING HEAD, TILTING CHUCK 
Three Jaws, Scroll type adjustment
Chuck Rotation 360
° by worm gear to hand knob
Tilts 90º horizontal to vertical position
Over-all height 3.5 inch
Inventory Reference T3954-4365-J  CLICK HERE FOR QUOTATION: NEW_universal tilting rotary dividing head with 4.3307 inch diameter chuck_three jaws_jaws adjust by scroll_chuck rotates 360 degrees and tilts thru 90 degrees_overall height 3.5 inch_Serial 000497   CLICK HERE FOR PHOTO: NEW precision dividing head_universal tilting rotary chuck_diameter chuck 4.3307 inch_3 adjustable jaws_chuck rotation 360 degrees_tilts thru 90 degrees_overall height 3.5 inch_Serial 000468 Photo
WEBSITE DISCOUNTED PRICE $289.95   



*NEW*
   7" diameter  PRECISION
ROTARY TABLE   Model TS180
3-T Slots,    Over-all Height 2-5/8"

Inventory Reference
T0140-4041-A CLICK HERE FOR QUOTATION:   precision rotary table_model TS180_diameter table 7 inch_number T-slots 3_height overall 2.625 inch_thru hole in table 1.125 inch_condition new_Serial 372   CLICK HERE FOR PHOTO:  NEW  precision rotary tables_model TS180_diameter table 7 inch_number T-slots 3_height overall 2.625 inch_thru hole in table 1.125 inch_Serial 000372 Photo
WEBSITE DISCOUNTED PRICE $289.95       



*SPECIAL BUY*
NEW*  ONLY 4 REMAINING
14" diameter  KAMAKURA
ROTARY TABLE
Hand Rotation Save 65% off new cost,
 Inventory Reference T0140-7204 CLICK HERE FOR QUOTATION: kamakura rotary table_size14 inch diameter_table with 4-T slotts and in center number 4 mt_hand rotation_CONDITION NEW_Serial 388 CLICK HERE FOR PHOTO: kamakura rotary table_size14 inch diameter_table with 4-T slotts and in center number 4 mt_hand rotation_CONDITION NEW_Serial 388 Photo
List Price $1,450.00
WEBSITE DISCOUNTED PRICE $489.50 EACH    



20" diameter KEARNEY and TRECKER ROTARY TABLE
Hand Rotation
with Power Take-off
Over-all  Height 5½"
Inventory Reference T0140-6318  CLICK HERE FOR QUOTATION: kearney and trecker 20 inch diameter rotary tables_3-T slots in table_hand rotation and equipped with power take off_height over-all 5.5 inch_Serial 15-4465
List Price $850.00
WEBSITE DISCOUNTED PRICE $589.00    



20" diameter CINCINNATI 
ROTARY TABLE
Hand Rotation

Power take off
Over-all height 6½"
Several in stock.     Ref. T0140-6319  CLICK HERE FOR QUOTATION: cincinnati 20 inch diameter rotary tables_3-T slots in table_hand rotation and equipped with power take off_height over-all 6.5 inch_Serial ARA1Y58-15
List Price $875.00
WEBSITE DISCOUNTED PRICE $589.00    



24" diameter KEARNEY and TRECKER
ROTARY TABLE
Over-all Height 5½"
Inventory Reference  T0140-6320 CLICK HERE FOR QUOTATION:  kearney and trecker 24 inch diameter rotary tables_3-T slots in table_hand rotation and equipped with power take off_height over-all 5.5 inch_Serial 12303
List Price $1,250.00
WEBSITE DISCOUNTED PRICE $689.00 





INDEXING  TABLES
▼      ▼          ▼


*NEW*  9" diameter PRECISION INDEXING TABLE   Four adjustable jaws
 
Inventory Reference  T0120-4042-N CLICK HERE FOR QUOTATION:  NEW index table_diameter 9 inch_number of adjustable jaws four_model X333  CLICK HERE FOR PHOTO:  NEW index table_diameter 9 inch_number of adjustable jaws four_model X333 Photo
List Price $850.00
WEBSITE DISCOUNTED PRICE $389.00 


20" diameter CINCINNATI ROTARY INDEX TABLE  Hydraulically Driven.
   6 T-Slots: 5 Parallel and 1 Cross.
Table mounted on Cross Slide Base
Over-all height 8½"
Inventory Reference T0140-5006  CLICK HERE FOR QUOTATION: cincinnati  rotary index table_diameter 20 inch_5-T slotts_5 parrallel and 1 cross_height overall 8.5 inch_hydraulically driven, mounted on adjustable base_Serial 12303
List Price $1450.00
WEBSITE DISCOUNTED PRICE $689.00    



35" diameter  Rotary INDEX Table
  
4-T Slots Three parallel & one Cross
  HEIGHT OF TABLE TOP when placed in Parallel or (Horizontal) to floor 39½"
  TABLE IN VERTICAL POSITION: P
erpendicular to floor,
     Center of table to floor 20-3/16"
      Top Edge of table to floor 38"
  
EQUIPPED WITH:
        Indexing Locking devices.
        Positioning Lift Pins to secure unit when changing table direction.
  
OVERALL WIDTH OF BASE  29½"
  
The Table Top can be positioned in Horizontal position (parallel to floor) or in Vertical position (perpendicular) to floor.
 
Inventory Reference  T0120-9308  CLICK HERE FOR QUOTATION: rotary index table_vertical or horizontal position_table diameter 35 inch with 4 t-slots_rotates 360 degrees_table height parallel to floor 39.5 inch_table in vertical position or perpendicular to floor center height is 20.187 inch- equipped with indexing position locks_The Table Top can be positioned in Horizontal position(parallel to floor) or in Vertical position (perpendicular) to floor_ID Number S14004
 CLICK HERE FOR PHOTO: rotary index table_vertical or horizontal position_table diameter 35 inch with 4 t-slots_rotates 360 degrees_table height parallel to floor 39.5 inch_table in vertical position or perpendicular to floor center height is 20.187 inch- equipped with indexing position locks_The Table Top can be positioned in Horizontal position(parallel to floor) or in Vertical position (perpendicular) to floor_ID Number S14004_Photo Table is in Horizontal Position to floor Photo Table is in Horizontal Position to floor.    CLICK HERE FOR PHOTO: rotary index table_vertical or horizontal position_table diameter 35 inch with 4 t-slots_rotates 360 degrees_table height parallel to floor 39.5 inch_table in vertical position or perpendicular to floor center height is 20.187 inch- equipped with indexing position locks_The Table Top can be positioned in Horizontal position(parallel to floor) or in Vertical position (perpendicular) to floor_ID Number S14004_Photo Table Face Photo of Table Face.     CLICK HERE FOR PHOTO: rotary index table_vertical or horizontal position_table diameter 35 inch with 4 t-slots_rotates 360 degrees_table height parallel to floor 39.5 inch_table in vertical position or perpendicular to floor center height is 20.187 inch- equipped with indexing position locks_The Table Top can be positioned in Horizontal position(parallel to floor) or in Vertical position (perpendicular) to floor_ID Number S14004_Photo Rear view with Table Lock Device Photo Rear view of Index Locking Device .
 
 WEBSITE DISCOUNTED PRICE $2,950.00    

 

TOOLING for Engine & Turret Lathes

used LATHE CHUCKS  6" thru 40" diameter  Three  -  Four & Six Jaws.


New HARDINGE POWER COLLET CLOSER
Collet type 5C
Capacity Round stock 1-1/16"
    Hexagon stock 7/8"
    Square stock 3/4"
Equipped with: Power Unit, Spindle Collet Holder Tube Assembly
Inventory Reference T3980-9444
List Price $1850.00
WEBSITE DISCOUNTED PRICE $989.00    


DRIVE PLATES
:
8" diameter thru 18" diameter


FACE PLATES
: 8" diameter thru 36" diameter


TURRET LATHE TOOLING  Very  Large Selection

CHUCKING TOOLS, for TURRET LATHES:
    Multiple Turning Heads   -   Plain Multiple turning Heads.
    Single Turning Heads   -    Slide Tools  Flange Mounting  - Ram & Saddle Type.
    Slide Tools: Shank Mounting   -   Quick Acting Slide Tools.
    Flanged Tool Holders.    Reversible Adjustable Cutter Holders.
    Reversible Plain Cutter Holders   -     Adjustable Cutter Holders.
    Plain Cutter Holders   -   Straight Cutter Holders   -    Angle Cutter Boring Bars.
    Straight Cutter Boring Bars   -    Boring Bar Sleeve   -    Boring Bar Cutter Heads.
    Three Slot Cutter Holders   -    Plain Tool Holders   -    Adjustable Tool Holders.
    Floating Reamer Holder  -    Releasing Tap holders   -   Recessing Cutter Holders.
    Duplex Tool Holders   -    Drill Sockets: for Taper Shanks   -   Tool Holder Bushings.
    Combination Tool & Cutter Heads


BAR TOOLS, for TURRET LATHE:

    Bar Turners   -   Bar Turners for saddle type turret lathe
    Combination Turners & End Formers   -   End Formers   -   Pointing Tools.
    Chamfer & End Working Tool   -    Center Drilling Tools  plain type
    Center Drilling Tools  lever operated type   -    Adjustable Knee Tools
    Revolving Centers    -  Plain Centers   -   Revolving Bar Stop
    Combination Bar Stop & Starting Drill


CROSS SLIDE TOOLS, for TURRET LATHES
    Bar Stop & center Plug      Tool post 4-Way     Flat seat & Rocker seat
    Front & Rear Cutter Blocks for cross slides (Ram Type)


HOLDING DEVICES, for TURRET LATHES
    Limited selection of Chucks & Collets







 

 TRACING ATTACHMENT for Lathe 





 

 VISES: All Type


Compound Angle Vise

5" wide Jaws UVT COMPOUND ANGLE VISE
   
Jaws open 4¾"
    Depth of Jaws 2"
    Removable steel jaws, 3/8 thick
    Vise tilt Left / Right  45° and Tilt Horizontal thru Vertical (90°) and
        10° below Horizontal plain        Base swivel 360°
 
WEBSITE PRICE $1,000.00     Inventory Reference  T3953-9118  CLICK HERE FOR PHOTO  UVT universal compound angle vise Photo


 

Horizontal Vise

*NEW* 3½" wide Jaws PRECISION ENGRAVING COMBINATION VISE
    Model QH88

    Steel Jaws with V-Slots   Jaws Open 2"
    Mounted on swivel base
WEBSITE PRICE $385.00     Inventory Reference T3953-4366 CLICK HERE FOR QUOTATION:  NEW precision rotating engraving drill vises_model QH88_capaity 3.5 inch width jaw_jaw opening 2 inch_swivel base_jaw plate with horizontal and vertical v-grooves  CLICK HERE FOR PHOTO: NEW precision rotating engraving drill vises_model QH88_capaity 3.5 inch width jaw_jaw opening 2 inch_swivel base_jaw plate with horizontal and vertical v-grooves Photo    CLICK HERE FOR PHOTO: NEW precision rotating engraving drill vises_model QH88_capaity 3.5 inch width jaw_jaw opening 2 inch_swivel base_jaw plate with horizontal and vertical v-grooves Photo



"NEW"  6" wide Jaws KAMAKURA MILL VISE 
Heavy Duty   Model 150
    Open 6"
    Removable 6½" wide Steel Jaws  Jaw Depth 1¾"
    with: Swivel Base,  Coolant trough on vise & swivel base
WEBSITE PRICE $389.00      Inventory Reference T3953-6925




 

WEIGHT MEASURING UNIT
Scales

None at this time, CALL TO BE PLACE ON OUR WANTED LIST, Thank You

IF YOU DON’T SEE IT ??
*PLEASE*
CALL
1-213- 627-2847
FAX  1-213-627-2499 or
E-mail us at 
sales@centurymachinery.com

TOP $$$ PAID for
ONE MACHINE or ENTIRE PLANT
" THANK YOU for taking the time to visit our Web Site "